Hello
I made some others tests for Bananapi and Centos image.
Image generated with rbf is 4.3GB. I think we should shrink it to 4GB to allow people use 4GB cards.
Maybe on a howto we can tell users to do : - install ntp (no clock on bananapi) - enable led activity - /sys/class/leds/bananapi:green:usr/trigger with on the following option : [none] usb-gadget usb-host cpu0 cpu1 mmc0 mmc0 is a good choice. - make eth0 dhcp by default
I did a yum update,
kernel armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 60 k kernel-core armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 17 M kernel-modules armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 11 M Updating: avahi armv7hl 0.6.31-14.el7 c7pass1 245 k avahi-autoipd armv7hl 0.6.31-14.el7 c7pass1 38 k avahi-libs armv7hl 0.6.31-14.el7 c7pass1 54 k kernel-tools armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 110 k kernel-tools-libs armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 65 k
But I got the error :
/usr/lib/kernel/install.d/51-dracut-rescue.install: line 59: /boot/loader/entries/5f978b1f46204461b2d19e876ea201d6-0-rescue.conf: No such file or directory warning: %posttrans(kernel-core-4.2.0-0.rc2.git0.1.centos.el7.armv7hl) scriptlet failed, exit status 1 Non-fatal POSTTRANS scriptlet failure in rpm package kernel-core-4.2.0-0.rc2.git0.1.centos.el7.armv7hl
after reboot I'm still in 4.0.0-1.el7.armv7hl.
Did someone want I try something on this image on bananapi?
Thanks,
Nicolas R.
On 08/23/2015 08:48 AM, Nicolas wrote:
Hello
I made some others tests for Bananapi and Centos image.
Image generated with rbf is 4.3GB. I think we should shrink it to 4GB to allow people use 4GB cards.
Maybe on a howto we can tell users to do :
- install ntp (no clock on bananapi)
yum install ntp chrony
I think is what you need.
And to set your time zone use the timedatectl command.
- enable led activity
- /sys/class/leds/bananapi:green:usr/trigger with on the
following option : [none] usb-gadget usb-host cpu0 cpu1 mmc0 mmc0 is a good choice.
- make eth0 dhcp by default
I did a yum update,
kernel armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 60 k kernel-core armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 17 M kernel-modules armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 11 M Updating: avahi armv7hl 0.6.31-14.el7 c7pass1 245 k avahi-autoipd armv7hl 0.6.31-14.el7 c7pass1 38 k avahi-libs armv7hl 0.6.31-14.el7 c7pass1 54 k kernel-tools armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 110 k kernel-tools-libs armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 65 k
But I got the error :
/usr/lib/kernel/install.d/51-dracut-rescue.install: line 59: /boot/loader/entries/5f978b1f46204461b2d19e876ea201d6-0-rescue.conf: No such file or directory warning: %posttrans(kernel-core-4.2.0-0.rc2.git0.1.centos.el7.armv7hl) scriptlet failed, exit status 1 Non-fatal POSTTRANS scriptlet failure in rpm package kernel-core-4.2.0-0.rc2.git0.1.centos.el7.armv7hl
after reboot I'm still in 4.0.0-1.el7.armv7hl.
Did someone want I try something on this image on bananapi?
See my messages on the same problem on my Cubietruck and Mandar's help in fixing this. I THINK yours is very similar to mine.
Hello
Yes I know for ntp, I just think maybe on the howto page for people we can tell user to do it, if it will not be on the image by default.
For kernel, that's exact we got the same error. I will try your steps and add the kernel in extlinux.conf asap and tell you.
Le 23/08/2015 15:21, Robert Moskowitz a écrit :
On 08/23/2015 08:48 AM, Nicolas wrote:
Hello
I made some others tests for Bananapi and Centos image.
Image generated with rbf is 4.3GB. I think we should shrink it to 4GB to allow people use 4GB cards.
Maybe on a howto we can tell users to do :
- install ntp (no clock on bananapi)
yum install ntp chrony
I think is what you need.
And to set your time zone use the timedatectl command.
- enable led activity
- /sys/class/leds/bananapi:green:usr/trigger with on the
following option : [none] usb-gadget usb-host cpu0 cpu1 mmc0 mmc0 is a good choice.
- make eth0 dhcp by default
I did a yum update,
kernel armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 60 k kernel-core armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 17 M kernel-modules armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 11 M Updating: avahi armv7hl 0.6.31-14.el7 c7pass1 245 k avahi-autoipd armv7hl 0.6.31-14.el7 c7pass1 38 k avahi-libs armv7hl 0.6.31-14.el7 c7pass1 54 k kernel-tools armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 110 k kernel-tools-libs armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 65 k
But I got the error :
/usr/lib/kernel/install.d/51-dracut-rescue.install: line 59: /boot/loader/entries/5f978b1f46204461b2d19e876ea201d6-0-rescue.conf: No such file or directory warning: %posttrans(kernel-core-4.2.0-0.rc2.git0.1.centos.el7.armv7hl) scriptlet failed, exit status 1 Non-fatal POSTTRANS scriptlet failure in rpm package kernel-core-4.2.0-0.rc2.git0.1.centos.el7.armv7hl
after reboot I'm still in 4.0.0-1.el7.armv7hl.
Did someone want I try something on this image on bananapi?
See my messages on the same problem on my Cubietruck and Mandar's help in fixing this. I THINK yours is very similar to mine.
Arm-dev mailing list Arm-dev@centos.org http://lists.centos.org/mailman/listinfo/arm-dev
On 08/23/2015 12:41 PM, Nicolas wrote:
Hello
Yes I know for ntp, I just think maybe on the howto page for people we can tell user to do it, if it will not be on the image by default.
I am ASSuMEing that at by beta, this will be part of the minimal image. So for now, we just have to do it ourselves.
For kernel, that's exact we got the same error. I will try your steps and add the kernel in extlinux.conf asap and tell you.
Le 23/08/2015 15:21, Robert Moskowitz a écrit :
On 08/23/2015 08:48 AM, Nicolas wrote:
Hello
I made some others tests for Bananapi and Centos image.
Image generated with rbf is 4.3GB. I think we should shrink it to 4GB to allow people use 4GB cards.
Maybe on a howto we can tell users to do :
- install ntp (no clock on bananapi)
yum install ntp chrony
I think is what you need.
And to set your time zone use the timedatectl command.
- enable led activity
- /sys/class/leds/bananapi:green:usr/trigger with on the
following option : [none] usb-gadget usb-host cpu0 cpu1 mmc0 mmc0 is a good choice.
- make eth0 dhcp by default
I did a yum update,
kernel armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 60 k kernel-core armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 17 M kernel-modules armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 11 M Updating: avahi armv7hl 0.6.31-14.el7 c7pass1 245 k avahi-autoipd armv7hl 0.6.31-14.el7 c7pass1 38 k avahi-libs armv7hl 0.6.31-14.el7 c7pass1 54 k kernel-tools armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 110 k kernel-tools-libs armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 65 k
But I got the error :
/usr/lib/kernel/install.d/51-dracut-rescue.install: line 59: /boot/loader/entries/5f978b1f46204461b2d19e876ea201d6-0-rescue.conf: No such file or directory warning: %posttrans(kernel-core-4.2.0-0.rc2.git0.1.centos.el7.armv7hl) scriptlet failed, exit status 1 Non-fatal POSTTRANS scriptlet failure in rpm package kernel-core-4.2.0-0.rc2.git0.1.centos.el7.armv7hl
after reboot I'm still in 4.0.0-1.el7.armv7hl.
Did someone want I try something on this image on bananapi?
See my messages on the same problem on my Cubietruck and Mandar's help in fixing this. I THINK yours is very similar to mine.
Arm-dev mailing list Arm-dev@centos.org http://lists.centos.org/mailman/listinfo/arm-dev
Arm-dev mailing list Arm-dev@centos.org http://lists.centos.org/mailman/listinfo/arm-dev
I've tried booting on 4.2.0-0:
Boot get a long time on "/Mounted Configuration File System/", before get like Robert:
/[ OK ] Mounted Configuration File System.// //Gdracut-initqueue[229]: Warning: Could not boot.// //dracut-initqueue[229]: Warning: /dev/disk/by-uuid/d1f4324e-0b95-412b-8e6e-797cc49c974a does not exist// // Starting Dracut Emergency Shell...// //Warning: /dev/disk/by-uuid/d1f4324e-0b95-412b-8e6e-797cc49c974a does not exist// // //Generating "/run/initramfs/rdsosreport.txt"/
and going to dracut. Initramfs should be wrong, probably following error during yum update.
I also have this before the boot menu: /Ignoring unknown command: ui// //Ignoring malformed menu command: autoboot// //Ignoring unknown command: totaltimeout// / Following options: /ui menu.c32// //menu autoboot centos// //menu title centos Options// //#menu hidden// //timeout 60// //totaltimeout 600/
On the top of extlinux.conf file. But during boot bananapi still autoboot on first choice after 5 sec. Did you have same error on cubieboard Robert?
Le 23/08/2015 18:53, Robert Moskowitz a écrit :
On 08/23/2015 12:41 PM, Nicolas wrote:
Hello
Yes I know for ntp, I just think maybe on the howto page for people we can tell user to do it, if it will not be on the image by default.
I am ASSuMEing that at by beta, this will be part of the minimal image. So for now, we just have to do it ourselves.
For kernel, that's exact we got the same error. I will try your steps and add the kernel in extlinux.conf asap and tell you.
Le 23/08/2015 15:21, Robert Moskowitz a écrit :
On 08/23/2015 08:48 AM, Nicolas wrote:
Hello
I made some others tests for Bananapi and Centos image.
Image generated with rbf is 4.3GB. I think we should shrink it to 4GB to allow people use 4GB cards.
Maybe on a howto we can tell users to do :
- install ntp (no clock on bananapi)
yum install ntp chrony
I think is what you need.
And to set your time zone use the timedatectl command.
- enable led activity
- /sys/class/leds/bananapi:green:usr/trigger with on the
following option : [none] usb-gadget usb-host cpu0 cpu1 mmc0 mmc0 is a good choice.
- make eth0 dhcp by default
I did a yum update,
kernel armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 60 k kernel-core armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 17 M kernel-modules armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 11 M Updating: avahi armv7hl 0.6.31-14.el7 c7pass1 245 k avahi-autoipd armv7hl 0.6.31-14.el7 c7pass1 38 k avahi-libs armv7hl 0.6.31-14.el7 c7pass1 54 k kernel-tools armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 110 k kernel-tools-libs armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 65 k
But I got the error :
/usr/lib/kernel/install.d/51-dracut-rescue.install: line 59: /boot/loader/entries/5f978b1f46204461b2d19e876ea201d6-0-rescue.conf: No such file or directory warning: %posttrans(kernel-core-4.2.0-0.rc2.git0.1.centos.el7.armv7hl) scriptlet failed, exit status 1 Non-fatal POSTTRANS scriptlet failure in rpm package kernel-core-4.2.0-0.rc2.git0.1.centos.el7.armv7hl
after reboot I'm still in 4.0.0-1.el7.armv7hl.
Did someone want I try something on this image on bananapi?
See my messages on the same problem on my Cubietruck and Mandar's help in fixing this. I THINK yours is very similar to mine.
Arm-dev mailing list Arm-dev@centos.org http://lists.centos.org/mailman/listinfo/arm-dev
Arm-dev mailing list Arm-dev@centos.org http://lists.centos.org/mailman/listinfo/arm-dev
Arm-dev mailing list Arm-dev@centos.org http://lists.centos.org/mailman/listinfo/arm-dev
I've tried booting on 4.2.0-0:
Boot get a long time on "Mounted Configuration File System", before get like Robert:
I tested the new kernel on my Cubietruck and was able to boot after manually generating the initramfs using the command
----------------------------------------------------------------------------------------------------------------------------- dracut --verbose /boot/initramfs-4.2.0-0.rc2.git0.1.centos.el7.armv7hl.img 4.2.0-0.rc2.git0.1.centos.el7.armv7hl -----------------------------------------------------------------------------------------------------------------------------
I have the package dracut-config-generic-033-240.el7.armv7hl installed. Make sure you have it too. I am not sure if that's the source of the problem.
The entry in /boot/extlinux/extlinux.conf created by the rbfkernelup yum plugin is ----------------------------------------------------------------------------------------------------------------------------- label Derived from Red Hat Enterprise Linux 7.1 (Source) 4.2.0-0.rc2.git0.1.centos.el7.armv7hl kernel /vmlinuz-4.2.0-0.rc2.git0.1.centos.el7.armv7hl append enforcing=0 root=UUID=34fa4504-d4ae-4d17-9c07-4c56a5f8f614 fdtdir /dtb-4.2.0-0.rc2.git0.1.centos.el7.armv7hl initrd /initramfs-4.2.0-0.rc2.git0.1.centos.el7.armv7hl.img ----------------------------------------------------------------------------------------------------------------------------- You will have the change the UUID as per your board.
However, I am not able to use ethernet with the new kernel. I haven't looked into it in detail but preliminary debugging shows the module stmmac_platform.ko not loading. I get this error ----------------------------------------------------------------------------------------------------------------------------- [root@cubietruck ~]# modprobe stmmac_platform [ 114.508483] stmmac_platform: Unknown symbol devm_kmalloc (err 0) [ 114.521212] stmmac_platform: Unknown symbol stmmac_suspend (err 0) [ 114.533718] stmmac_platform: Unknown symbol platform_get_irq_byname (err 0) [ 114.546855] stmmac_platform: Unknown symbol stmmac_dvr_remove (err 0) [ 114.559331] stmmac_platform: Unknown symbol platform_get_resource (err 0) [ 114.572149] stmmac_platform: Unknown symbol of_get_phy_mode (err 0) [ 114.584331] stmmac_platform: Unknown symbol of_property_read_u32_array (err 0) [ 114.597508] stmmac_platform: Unknown symbol of_alias_get_id (err 0) [ 114.609629] stmmac_platform: Unknown symbol stmmac_resume (err 0) [ 114.621533] stmmac_platform: Unknown symbol stmmac_dvr_probe (err 0) modprobe: ERROR: could not insert 'stmmac_platform': Unknown symbol in module, or unknown parameter (see dmesg) -----------------------------------------------------------------------------------------------------------------------------
Regards Mandar Joshi
On 08/24/2015 10:00 AM, Mandar Joshi wrote:
I've tried booting on 4.2.0-0:
Boot get a long time on "Mounted Configuration File System", before get like Robert:
I tested the new kernel on my Cubietruck and was able to boot after manually generating the initramfs using the command
dracut --verbose /boot/initramfs-4.2.0-0.rc2.git0.1.centos.el7.armv7hl.img 4.2.0-0.rc2.git0.1.centos.el7.armv7hl
I have the package dracut-config-generic-033-240.el7.armv7hl installed. Make sure you have it too. I am not sure if that's the source of the problem.
The entry in /boot/extlinux/extlinux.conf created by the rbfkernelup yum plugin is
label Derived from Red Hat Enterprise Linux 7.1 (Source) 4.2.0-0.rc2.git0.1.centos.el7.armv7hl kernel /vmlinuz-4.2.0-0.rc2.git0.1.centos.el7.armv7hl append enforcing=0 root=UUID=34fa4504-d4ae-4d17-9c07-4c56a5f8f614 fdtdir /dtb-4.2.0-0.rc2.git0.1.centos.el7.armv7hl initrd /initramfs-4.2.0-0.rc2.git0.1.centos.el7.armv7hl.img
You will have the change the UUID as per your board.
How do I find out my UUID?
However, I am not able to use ethernet with the new kernel. I haven't looked into it in detail but preliminary debugging shows the module stmmac_platform.ko not loading. I get this error
Not good. I will wait for your progress on this. I have some samba things to work on right now.
[root@cubietruck ~]# modprobe stmmac_platform [ 114.508483] stmmac_platform: Unknown symbol devm_kmalloc (err 0) [ 114.521212] stmmac_platform: Unknown symbol stmmac_suspend (err 0) [ 114.533718] stmmac_platform: Unknown symbol platform_get_irq_byname (err 0) [ 114.546855] stmmac_platform: Unknown symbol stmmac_dvr_remove (err 0) [ 114.559331] stmmac_platform: Unknown symbol platform_get_resource (err 0) [ 114.572149] stmmac_platform: Unknown symbol of_get_phy_mode (err 0) [ 114.584331] stmmac_platform: Unknown symbol of_property_read_u32_array (err 0) [ 114.597508] stmmac_platform: Unknown symbol of_alias_get_id (err 0) [ 114.609629] stmmac_platform: Unknown symbol stmmac_resume (err 0) [ 114.621533] stmmac_platform: Unknown symbol stmmac_dvr_probe (err 0) modprobe: ERROR: could not insert 'stmmac_platform': Unknown symbol in module, or unknown parameter (see dmesg)
Regards Mandar Joshi _______________________________________________ Arm-dev mailing list Arm-dev@centos.org http://lists.centos.org/mailman/listinfo/arm-dev
For the UUID, you can find it with : ls -l /dev/disk/by-uuid and take the UUID associated by your partition.
I will try regenerating initramfs asap.
Nicolas Repentin nicolas@shivaserv.fr
24 août 2015 16:11 "Robert Moskowitz" rgm@htt-consult.com a écrit:
On 08/24/2015 10:00 AM, Mandar Joshi wrote:
I've tried booting on 4.2.0-0:
Boot get a long time on "Mounted Configuration File System", before get like Robert:
I tested the new kernel on my Cubietruck and was able to boot after manually generating the initramfs using the command
dracut --verbose /boot/initramfs-4.2.0-0.rc2.git0.1.centos.el7.armv7hl.img 4.2.0-0.rc2.git0.1.centos.el7.armv7hl
I have the package dracut-config-generic-033-240.el7.armv7hl installed. Make sure you have it too. I am not sure if that's the source of the problem.
The entry in /boot/extlinux/extlinux.conf created by the rbfkernelup yum plugin is
label Derived from Red Hat Enterprise Linux 7.1 (Source) 4.2.0-0.rc2.git0.1.centos.el7.armv7hl kernel /vmlinuz-4.2.0-0.rc2.git0.1.centos.el7.armv7hl append enforcing=0 root=UUID=34fa4504-d4ae-4d17-9c07-4c56a5f8f614 fdtdir /dtb-4.2.0-0.rc2.git0.1.centos.el7.armv7hl initrd /initramfs-4.2.0-0.rc2.git0.1.centos.el7.armv7hl.img
You will have the change the UUID as per your board.
How do I find out my UUID?
However, I am not able to use ethernet with the new kernel. I haven't looked into it in detail but preliminary debugging shows the module stmmac_platform.ko not loading. I get this error
Not good. I will wait for your progress on this. I have some samba things to work on right now.
[root@cubietruck ~]# modprobe stmmac_platform [ 114.508483] stmmac_platform: Unknown symbol devm_kmalloc (err 0) [ 114.521212] stmmac_platform: Unknown symbol stmmac_suspend (err 0) [ 114.533718] stmmac_platform: Unknown symbol platform_get_irq_byname (err 0) [ 114.546855] stmmac_platform: Unknown symbol stmmac_dvr_remove (err 0) [ 114.559331] stmmac_platform: Unknown symbol platform_get_resource (err 0) [ 114.572149] stmmac_platform: Unknown symbol of_get_phy_mode (err 0) [ 114.584331] stmmac_platform: Unknown symbol of_property_read_u32_array (err 0) [ 114.597508] stmmac_platform: Unknown symbol of_alias_get_id (err 0) [ 114.609629] stmmac_platform: Unknown symbol stmmac_resume (err 0) [ 114.621533] stmmac_platform: Unknown symbol stmmac_dvr_probe (err 0) modprobe: ERROR: could not insert 'stmmac_platform': Unknown symbol in module, or unknown parameter (see dmesg)
Regards Mandar Joshi _______________________________________________ Arm-dev mailing list Arm-dev@centos.org http://lists.centos.org/mailman/listinfo/arm-dev
Arm-dev mailing list Arm-dev@centos.org http://lists.centos.org/mailman/listinfo/arm-dev
I will try to reboot when I'm home but initramfs seems to be quite light... maybe it's normal.
-rw-------. 1 root root 64M 18 juin 18:32 initramfs-4.0.0-1.el7.armv7hl.img -rw------- 1 root root 33M 24 août 14:23 initramfs-4.2.0-0.rc2.git0.1.centos.el7.armv7hl.img
Nicolas Repentin 24 août 2015 16:01 "Mandar Joshi" a écrit:
I've tried booting on 4.2.0-0:
Boot get a long time on "Mounted Configuration File System", before get like Robert: I tested the new kernel on my Cubietruck and was able to boot after manually generating the initramfs using the command
----------------------------------------------------------------------------------------------------------------------------- dracut --verbose /boot/initramfs-4.2.0-0.rc2.git0.1.centos.el7.armv7hl.img 4.2.0-0.rc2.git0.1.centos.el7.armv7hl -----------------------------------------------------------------------------------------------------------------------------
I have the package dracut-config-generic-033-240.el7.armv7hl installed. Make sure you have it too. I am not sure if that's the source of the problem.
The entry in /boot/extlinux/extlinux.conf created by the rbfkernelup yum plugin is ----------------------------------------------------------------------------------------------------------------------------- label Derived from Red Hat Enterprise Linux 7.1 (Source) 4.2.0-0.rc2.git0.1.centos.el7.armv7hl kernel /vmlinuz-4.2.0-0.rc2.git0.1.centos.el7.armv7hl append enforcing=0 root=UUID=34fa4504-d4ae-4d17-9c07-4c56a5f8f614 fdtdir /dtb-4.2.0-0.rc2.git0.1.centos.el7.armv7hl initrd /initramfs-4.2.0-0.rc2.git0.1.centos.el7.armv7hl.img ----------------------------------------------------------------------------------------------------------------------------- You will have the change the UUID as per your board.
However, I am not able to use ethernet with the new kernel. I haven't looked into it in detail but preliminary debugging shows the module stmmac_platform.ko not loading. I get this error ----------------------------------------------------------------------------------------------------------------------------- [root@cubietruck ~]# modprobe stmmac_platform [ 114.508483] stmmac_platform: Unknown symbol devm_kmalloc (err 0) [ 114.521212] stmmac_platform: Unknown symbol stmmac_suspend (err 0) [ 114.533718] stmmac_platform: Unknown symbol platform_get_irq_byname (err 0) [ 114.546855] stmmac_platform: Unknown symbol stmmac_dvr_remove (err 0) [ 114.559331] stmmac_platform: Unknown symbol platform_get_resource (err 0) [ 114.572149] stmmac_platform: Unknown symbol of_get_phy_mode (err 0) [ 114.584331] stmmac_platform: Unknown symbol of_property_read_u32_array (err 0) [ 114.597508] stmmac_platform: Unknown symbol of_alias_get_id (err 0) [ 114.609629] stmmac_platform: Unknown symbol stmmac_resume (err 0) [ 114.621533] stmmac_platform: Unknown symbol stmmac_dvr_probe (err 0) modprobe: ERROR: could not insert 'stmmac_platform': Unknown symbol in module, or unknown parameter (see dmesg) -----------------------------------------------------------------------------------------------------------------------------
Regards Mandar Joshi _______________________________________________ Arm-dev mailing list Arm-dev@centos.org (mailto:Arm-dev@centos.org) http://lists.centos.org/mailman/listinfo/arm-dev (http://lists.centos.org/mailman/listinfo/arm-dev)
I will try to reboot when I'm home but initramfs seems to be quite light... maybe it's normal.
-rw-------. 1 root root 64M 18 juin 18:32 initramfs-4.0.0-1.el7.armv7hl.img -rw------- 1 root root 33M 24 août 14:23 initramfs-4.2.0-0.rc2.git0.1.centos.el7.armv7hl.img
Mine's 29MB The reason the older (initramfs-4.0.0-1.el7.armv7hl.img) one is bigger is because earlier, RBF used to generate initramfs using the option --no-compress
On 08/23/2015 07:48 AM, Nicolas wrote:
Hello
I made some others tests for Bananapi and Centos image.
Image generated with rbf is 4.3GB. I think we should shrink it to 4GB to allow people use 4GB cards.
Maybe on a howto we can tell users to do :
- install ntp (no clock on bananapi)
- enable led activity
- /sys/class/leds/bananapi:green:usr/trigger with on the following
option : [none] usb-gadget usb-host cpu0 cpu1 mmc0 mmc0 is a good choice.
- make eth0 dhcp by default
I did a yum update,
kernel armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 60 k kernel-core armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 17 M kernel-modules armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 11 M Updating: avahi armv7hl 0.6.31-14.el7 c7pass1 245 k avahi-autoipd armv7hl 0.6.31-14.el7 c7pass1 38 k avahi-libs armv7hl 0.6.31-14.el7 c7pass1 54 k kernel-tools armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 110 k kernel-tools-libs armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 65 k
But I got the error :
/usr/lib/kernel/install.d/51-dracut-rescue.install: line 59: /boot/loader/entries/5f978b1f46204461b2d19e876ea201d6-0-rescue.conf: No such file or directory warning: %posttrans(kernel-core-4.2.0-0.rc2.git0.1.centos.el7.armv7hl) scriptlet failed, exit status 1 Non-fatal POSTTRANS scriptlet failure in rpm package kernel-core-4.2.0-0.rc2.git0.1.centos.el7.armv7hl
The kernel updates will not happen right now via the RPM .. that has to be a manual process because of the uboot process.
We would like someone smart to figure out how to make that process happen in a way we can roll it into the SRPM :)
On 08/24/2015 11:45 AM, Johnny Hughes wrote:
On 08/23/2015 07:48 AM, Nicolas wrote:
Hello
I made some others tests for Bananapi and Centos image.
Image generated with rbf is 4.3GB. I think we should shrink it to 4GB to allow people use 4GB cards.
Maybe on a howto we can tell users to do :
- install ntp (no clock on bananapi)
- enable led activity
- /sys/class/leds/bananapi:green:usr/trigger with on the following
option : [none] usb-gadget usb-host cpu0 cpu1 mmc0 mmc0 is a good choice.
- make eth0 dhcp by default
I did a yum update,
kernel armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 60 k kernel-core armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 17 M kernel-modules armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 11 M Updating: avahi armv7hl 0.6.31-14.el7 c7pass1 245 k avahi-autoipd armv7hl 0.6.31-14.el7 c7pass1 38 k avahi-libs armv7hl 0.6.31-14.el7 c7pass1 54 k kernel-tools armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 110 k kernel-tools-libs armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 65 k
But I got the error :
/usr/lib/kernel/install.d/51-dracut-rescue.install: line 59: /boot/loader/entries/5f978b1f46204461b2d19e876ea201d6-0-rescue.conf: No such file or directory warning: %posttrans(kernel-core-4.2.0-0.rc2.git0.1.centos.el7.armv7hl) scriptlet failed, exit status 1 Non-fatal POSTTRANS scriptlet failure in rpm package kernel-core-4.2.0-0.rc2.git0.1.centos.el7.armv7hl
The kernel updates will not happen right now via the RPM .. that has to be a manual process because of the uboot process.
We would like someone smart to figure out how to make that process happen in a way we can roll it into the SRPM :)
All I can say is ask the Fedora-arm devel team, as they have it down. Perhaps start with Peter Robinson as his is the name I associate with at least being in charge of the list.
Le 24/08/2015 17:52, Robert Moskowitz a écrit :
On 08/24/2015 11:45 AM, Johnny Hughes wrote:
On 08/23/2015 07:48 AM, Nicolas wrote:
Hello
I made some others tests for Bananapi and Centos image.
Image generated with rbf is 4.3GB. I think we should shrink it to 4GB to allow people use 4GB cards.
Maybe on a howto we can tell users to do :
- install ntp (no clock on bananapi)
- enable led activity
- /sys/class/leds/bananapi:green:usr/trigger with on the
following option : [none] usb-gadget usb-host cpu0 cpu1 mmc0 mmc0 is a good choice.
- make eth0 dhcp by default
I did a yum update,
kernel armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 60 k kernel-core armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 17 M kernel-modules armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 11 M Updating: avahi armv7hl 0.6.31-14.el7 c7pass1 245 k avahi-autoipd armv7hl 0.6.31-14.el7 c7pass1 38 k avahi-libs armv7hl 0.6.31-14.el7 c7pass1 54 k kernel-tools armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 110 k kernel-tools-libs armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 65 k
But I got the error :
/usr/lib/kernel/install.d/51-dracut-rescue.install: line 59: /boot/loader/entries/5f978b1f46204461b2d19e876ea201d6-0-rescue.conf: No such file or directory warning: %posttrans(kernel-core-4.2.0-0.rc2.git0.1.centos.el7.armv7hl) scriptlet failed, exit status 1 Non-fatal POSTTRANS scriptlet failure in rpm package kernel-core-4.2.0-0.rc2.git0.1.centos.el7.armv7hl
The kernel updates will not happen right now via the RPM .. that has to be a manual process because of the uboot process.
We would like someone smart to figure out how to make that process happen in a way we can roll it into the SRPM :)
All I can say is ask the Fedora-arm devel team, as they have it down. Perhaps start with Peter Robinson as his is the name I associate with at least being in charge of the list.
I already have done it once for the pcduino3 nano (armv7 too), and it seems for example for bananapi it looks like the same. Steps are here, but it seems to be based on the sunxi kernel (3.x, not 4.x). Maybe I can try it, but I don't know how to use 4.2 kernel.
http://wiki.lemaker.org/BananaPro/Pi:Building_u-boot,_script.bin_and_linux-k...
<off topic> I should have tested the pcduino3 nano, to validate centos 7 arm, but it is used in prod, and very far away :p </off topic>
Le 24/08/2015 18:42, Nicolas a écrit :
Le 24/08/2015 17:52, Robert Moskowitz a écrit :
On 08/24/2015 11:45 AM, Johnny Hughes wrote:
On 08/23/2015 07:48 AM, Nicolas wrote:
Hello
I made some others tests for Bananapi and Centos image.
Image generated with rbf is 4.3GB. I think we should shrink it to 4GB to allow people use 4GB cards.
Maybe on a howto we can tell users to do :
- install ntp (no clock on bananapi)
- enable led activity
- /sys/class/leds/bananapi:green:usr/trigger with on the
following option : [none] usb-gadget usb-host cpu0 cpu1 mmc0 mmc0 is a good choice.
- make eth0 dhcp by default
I did a yum update,
kernel armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 60 k kernel-core armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 17 M kernel-modules armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 11 M Updating: avahi armv7hl 0.6.31-14.el7 c7pass1 245 k avahi-autoipd armv7hl 0.6.31-14.el7 c7pass1 38 k avahi-libs armv7hl 0.6.31-14.el7 c7pass1 54 k kernel-tools armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 110 k kernel-tools-libs armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 65 k
But I got the error :
/usr/lib/kernel/install.d/51-dracut-rescue.install: line 59: /boot/loader/entries/5f978b1f46204461b2d19e876ea201d6-0-rescue.conf: No
such file or directory warning: %posttrans(kernel-core-4.2.0-0.rc2.git0.1.centos.el7.armv7hl) scriptlet failed, exit status 1 Non-fatal POSTTRANS scriptlet failure in rpm package kernel-core-4.2.0-0.rc2.git0.1.centos.el7.armv7hl
The kernel updates will not happen right now via the RPM .. that has to be a manual process because of the uboot process.
We would like someone smart to figure out how to make that process happen in a way we can roll it into the SRPM :)
All I can say is ask the Fedora-arm devel team, as they have it down. Perhaps start with Peter Robinson as his is the name I associate with at least being in charge of the list.
I already have done it once for the pcduino3 nano (armv7 too), and it seems for example for bananapi it looks like the same. Steps are here, but it seems to be based on the sunxi kernel (3.x, not 4.x). Maybe I can try it, but I don't know how to use 4.2 kernel.
http://wiki.lemaker.org/BananaPro/Pi:Building_u-boot,_script.bin_and_linux-k...
<off topic> I should have tested the pcduino3 nano, to validate centos 7 arm, but it is used in prod, and very far away :p </off topic>
It seems Fedora explain here it too : https://fedoraproject.org/wiki/Architectures/Fedora_ARM_Kernel_Updates#Gener...
(sorry I don't want to spam :p)
Hello
I have tested kernel 4.2.0-0.rc2.git0.1 on bananapi. The kernel boots fine but no ethernet like Robert (same error).
Le 24/08/2015 18:47, Nicolas a écrit :
Le 24/08/2015 18:42, Nicolas a écrit :
Le 24/08/2015 17:52, Robert Moskowitz a écrit :
On 08/24/2015 11:45 AM, Johnny Hughes wrote:
On 08/23/2015 07:48 AM, Nicolas wrote:
Hello
I made some others tests for Bananapi and Centos image.
Image generated with rbf is 4.3GB. I think we should shrink it to 4GB to allow people use 4GB cards.
Maybe on a howto we can tell users to do :
- install ntp (no clock on bananapi)
- enable led activity
- /sys/class/leds/bananapi:green:usr/trigger with on the
following option : [none] usb-gadget usb-host cpu0 cpu1 mmc0 mmc0 is a good choice.
- make eth0 dhcp by default
I did a yum update,
kernel armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 60 k kernel-core armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 17 M kernel-modules armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 11 M Updating: avahi armv7hl 0.6.31-14.el7 c7pass1 245 k avahi-autoipd armv7hl 0.6.31-14.el7 c7pass1 38 k avahi-libs armv7hl 0.6.31-14.el7 c7pass1 54 k kernel-tools armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 110 k kernel-tools-libs armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 65 k
But I got the error :
/usr/lib/kernel/install.d/51-dracut-rescue.install: line 59: /boot/loader/entries/5f978b1f46204461b2d19e876ea201d6-0-rescue.conf: No such file or directory warning: %posttrans(kernel-core-4.2.0-0.rc2.git0.1.centos.el7.armv7hl) scriptlet failed, exit status 1 Non-fatal POSTTRANS scriptlet failure in rpm package kernel-core-4.2.0-0.rc2.git0.1.centos.el7.armv7hl
The kernel updates will not happen right now via the RPM .. that has to be a manual process because of the uboot process.
We would like someone smart to figure out how to make that process happen in a way we can roll it into the SRPM :)
All I can say is ask the Fedora-arm devel team, as they have it down. Perhaps start with Peter Robinson as his is the name I associate with at least being in charge of the list.
I already have done it once for the pcduino3 nano (armv7 too), and it seems for example for bananapi it looks like the same. Steps are here, but it seems to be based on the sunxi kernel (3.x, not 4.x). Maybe I can try it, but I don't know how to use 4.2 kernel.
http://wiki.lemaker.org/BananaPro/Pi:Building_u-boot,_script.bin_and_linux-k...
<off topic> I should have tested the pcduino3 nano, to validate centos 7 arm, but it is used in prod, and very far away :p </off topic>
It seems Fedora explain here it too : https://fedoraproject.org/wiki/Architectures/Fedora_ARM_Kernel_Updates#Gener...
(sorry I don't want to spam :p) _______________________________________________ Arm-dev mailing list Arm-dev@centos.org http://lists.centos.org/mailman/listinfo/arm-dev
Hi,
I'm using this little script to update my update uboot on my fedora22 bpir2 https://github.com/Hexxeh/rpi-update
It uses git to pull the latest firmware from the raspbery git repo and then install it while running.
Maybe you can use it to find some inspiration in it for a post-install rpm script :-)
Regards Rob Verduijn
2015-08-24 17:45 GMT+02:00 Johnny Hughes johnny@centos.org:
On 08/23/2015 07:48 AM, Nicolas wrote:
Hello
I made some others tests for Bananapi and Centos image.
Image generated with rbf is 4.3GB. I think we should shrink it to 4GB to allow people use 4GB cards.
Maybe on a howto we can tell users to do :
- install ntp (no clock on bananapi)
- enable led activity
- /sys/class/leds/bananapi:green:usr/trigger with on the following
option : [none] usb-gadget usb-host cpu0 cpu1 mmc0 mmc0 is a good choice.
- make eth0 dhcp by default
I did a yum update,
kernel armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 60 k kernel-core armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 17 M kernel-modules armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 11 M Updating: avahi armv7hl 0.6.31-14.el7 c7pass1 245 k avahi-autoipd armv7hl 0.6.31-14.el7 c7pass1 38 k avahi-libs armv7hl 0.6.31-14.el7 c7pass1 54 k kernel-tools armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 110 k kernel-tools-libs armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1 65 k
But I got the error :
/usr/lib/kernel/install.d/51-dracut-rescue.install: line 59: /boot/loader/entries/5f978b1f46204461b2d19e876ea201d6-0-rescue.conf: No such file or directory warning: %posttrans(kernel-core-4.2.0-0.rc2.git0.1.centos.el7.armv7hl) scriptlet failed, exit status 1 Non-fatal POSTTRANS scriptlet failure in rpm package kernel-core-4.2.0-0.rc2.git0.1.centos.el7.armv7hl
The kernel updates will not happen right now via the RPM .. that has to be a manual process because of the uboot process.
We would like someone smart to figure out how to make that process happen in a way we can roll it into the SRPM :)
Arm-dev mailing list Arm-dev@centos.org http://lists.centos.org/mailman/listinfo/arm-dev
-
Johnny Hughes -
Mandar Joshi -
Nicolas -
Nicolas Repentin
-
Rob Verduijn -
Robert Moskowitz