Discuss June 2009

discuss@lists.centos.org

286 participants
327 discussions

how to disable lots of auditd messages?
by MontyRee 02 Jun '09

02 Jun '09

hello all. My system is centos 5.x and there is no module related auditd there is no process(daemon) related auditd and selinux definately disabled. But I can see lots of auditd messages like below. Oct 20 02:01:01 linux kernel: type=1106 audit(1224435661.064:65210): user pid=25860 uid=0 auid=0 msg='PAM: session close acct="root" : exe="/usr/sbin/crond" (hostname=?, addr=?, terminal=cron res=success)' Is there any way to disable this messages? if I should change /etc/audit/auditd.conf file, please let me know which config should I change. Thanks in advance. _________________________________________________________________ 녹돌이의 A+ 중간고사 준비 노하우 공개! 지금 클릭하세요! http://mswindowslive.tistory.com/54

2 1

release/update question
by Matthias Leopold 02 Jun '09

02 Jun '09

hi, since i don't use centos very heavily i'm not too familiar with the centos/rhel release/update process (and i didn't do much research on this): is it normal behavior that through the use of "yum update" systems are forced to follow the point releases of a major release (5.0 -> 5.1 -> 5.2, etc)? is there a way and would it make sense to stay within one particular release and receive only security updates? or is this question pointless because point releases _are_ only security updates? thx for teaching a debian user matthias

3 2

NetworkManager, Vpnc and Centos 5.3 Problem.
by Abdullah Teke 02 Jun '09

02 Jun '09

Hi; I have Centos 5.3 on my labtop and have to vpn a cisco vpn server. So i installed vpnc on my box. Then i want to integrate with NetworkManager and vpnc so i also installed NetworkManager-vpnc 7.0. I configured vpn connection and tried to connect. It looks like it connected but when i try to login my server at behind of the vpn server, i cant reach them. I check the routes and it looks like at below. [root@localhost sysconfig]# route Destination Gateway Genmask Flags Metric Ref Use Iface xxx.xxx.xxx.xxx 10.15.1.1 255.255.255.255 UGH 0 0 0 eth0 10.255.0.136 * 255.255.255.248 U 0 0 0 tun0 10.15.0.0 * 255.255.0.0 U 1 0 0 eth0 default * 0.0.0.0 U 0 0 0 tun0 When i check the log files everthing seems ok at all. Jun 2 14:43:46 localhost NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.vpnc'... Jun 2 14:43:46 localhost NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.vpnc' started (org.freedesktop.NetworkManager.vpnc), PID 22320 Jun 2 14:43:46 localhost NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.vpnc' just appeared, activating connections Jun 2 14:43:46 localhost NetworkManager: <info> VPN plugin state changed: 1 Jun 2 14:43:46 localhost NetworkManager: <info> VPN plugin state changed: 3 Jun 2 14:43:46 localhost NetworkManager: <info> VPN connection 'xxxxx' (Connect) reply received. Jun 2 14:43:47 localhost NetworkManager: <info> VPN connection 'xxxxx' (IP Config Get) reply received. Jun 2 14:43:47 localhost NetworkManager: <info> VPN Gateway: xxx.xxx.xxx.xxx Jun 2 14:43:47 localhost NetworkManager: <info> Tunnel Device: tun0 Jun 2 14:43:47 localhost NetworkManager: <info> Internal IP4 Address: 10.255.0.89 Jun 2 14:43:47 localhost NetworkManager: <info> Internal IP4 Prefix: 29 Jun 2 14:43:47 localhost NetworkManager: <info> Internal IP4 Point-to-Point Address: 10.255.0.89 Jun 2 14:43:47 localhost NetworkManager: <info> Maximum Segment Size (MSS): 0 Jun 2 14:43:47 localhost NetworkManager: <info> Internal IP4 DNS: 192.168.90.51 Jun 2 14:43:47 localhost NetworkManager: <info> DNS Domain: '(none)' Jun 2 14:43:47 localhost NetworkManager: <info> Login Banner: Jun 2 14:43:47 localhost NetworkManager: <info> ----------------------------------------- Jun 2 14:43:47 localhost NetworkManager: <info> (null) Jun 2 14:43:47 localhost NetworkManager: <info> ----------------------------------------- Jun 2 14:43:48 localhost NetworkManager: <info> VPN connection 'xxxxx' (IP Config Get) complete. Jun 2 14:43:48 localhost NetworkManager: <info> Policy set 'System eth0' (eth0) as default for routing and DNS. Jun 2 14:43:48 localhost NetworkManager: <info> VPN plugin state changed: 4 Then i tried at the console and run the vpnc command and enter the vpn information from command line like below it is worked [root@localhost sysconfig]# vpnc Enter IPSec gateway address: xxx.xxx.xxx.xxx Enter IPSec ID for xxx.xxx.xxx.xxx: xxx Enter IPSec secret for xxx(a)xxx.xxx.xxx.xxx Enter username for xxx.xxx.xxx.xxx: xxx-xxx Enter password for xxx-xxx(a)xxx.xxx.xxx.xxx VPNC started in background (pid: 19071)... I can reach my servers. There isnt any error while try with networkmanager vpnc, but it cant connect actually When i looked at routes again. It is shown the same values. Any idea? -- Abdullah Teke --------------------------- abdullahteke(a)gmail.com www.abdullahteke.com

1 0

Changing a user's shell on CentOS Directory Server?
by Matt Harrington 02 Jun '09

02 Jun '09

Should unprivileged users be able to change their shell with lchsh on 5.3 and, if it matters, CentOS Directory Server? lchsh seems to require more open permissions than those which come with a default installation: Error initializing libuser: could not open configuration file `/etc/default/useradd': Permission denied. Matt

4 5

Why yum-cron is only at x86_64 system?
by MontyRee 02 Jun '09

02 Jun '09

Hello, all. I have operated centos 4.x and 5.x system. for 4.x system, I auto update using yum and for 5.x system, using yum-cron. but I can't find any yum-cron package (i386) like below. # yum search yum-cron(at i686, centox 5.3) Warning: No matches found for: yum-cron No Matches found # yum search yum-cron(at x86_64, centos 5.3) ==================================================== Matched: yum-cron ===================================================== yum-cron.noarch : Files needed to run yum updates as a cron job I don't know why the result was different? Thanks in advance. _________________________________________________________________ 대딩들의 인맥관리! 윈도우 라이브 메신저로 해결하자! 채팅은 기본! 25GB 자료실은 덤! 대딩들의 아지트 윈메 클럽 http://im.msn.co.kr/Univ/

4 3

No libGL on this box - disabling OpenGL support !
by madunix 01 Jun '09

01 Jun '09

am getting the following.... [root@linux11 ~]# glxinfo | grep direct Error: unable to open display (null) [root@linux11 ~]# uname -a SMP Thu May 7 11:51:15 EDT 2009 i686 i686 i386 GNU/Linux [root@linux11 ~]# cat /etc/redhat-release CentOS release 5.3 (Final) on the otherhand when i run wine application i get the following too err:wgl:X11DRV_DescribePixelFormat No libGL on this box - disabling OpenGL support ! err:wgl:X11DRV_ChoosePixelFormat No libGL on this box - disabling OpenGL support ! fixme:win:EnumDisplayDevicesW ((null),0,0x33f544,0x00000000), stub! fixme:win:EnumDisplayDevicesW ((null),0,0x33f530,0x00000000), stub! fixme:system:SystemParametersInfoW Unimplemented action: 113 (SPI_SETMOUSESPEED) err:wgl:X11DRV_ChoosePixelFormat No libGL on this box - disabling OpenGL support ! fixme:win:EnumDisplayDevicesW ((null),0,0x33f544,0x00000000), stub! fixme:win:EnumDisplayDevicesW ((null),0,0x33f530,0x00000000), stub! fixme:xrandr:X11DRV_XRandR_SetCurrentMode Cannot change screen BPP from 32 to 16 fixme:system:SystemParametersInfoW Unimplemented action: 113 (SPI_SETMOUSESPEED) err:wgl:X11DRV_ChoosePixelFormat No libGL on this box - disabling OpenGL support ! fixme:win:EnumDisplayDevicesW ((null),0,0x33f544,0x00000000), stub! fixme:win:EnumDisplayDevicesW ((null),0,0x33f530,0x00000000), stub! fixme:system:SystemParametersInfoW Unimplemented action: 113 (SPI_SETMO Thanks

5 13

turnoff monitor centos4.4 issue
by karthikeyan subbannan 01 Jun '09

01 Jun '09

hi all, In centos 4.4 turnoff monitor is not working.Dpms is enable and also change the dpms setting it working but not functioning. I am using kde3.3 desktop.How to slove this....pls help me. thanks, karthik

2 1

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss June 2009