Discuss July 2014

discuss@lists.centos.org

211 participants
225 discussions

Centos 7: printing four copies with Libreoffice prints garbage
by Frank Cox 30 Jul '14

30 Jul '14

I have a Xerox Phaser 3250 printer It worked perfectly under Centos 6 when I told cups that it was a Xerox Phaser 3150. It works under Centos 7, too. I can print pdf files from evince and whatnot with no problems, and printing one, two or three copies of a document from libreoffice works as well. However, if I tell libreoffice to print four copies of a document ("number of copies" =4) then I get garbage printed on the printer; many many pages containing one or two lines of garbage characters. If I run the spadmin program and tell it to print a test page, it prints fine. Two test pages, fine. Three, also fine. Four test pages, and I get page after page after page of garbage again. What could the problem be? -- MELVILLE THEATRE ~ Real D 3D Digital Cinema ~ www.melvilletheatre.com

3 2

Re: [CentOS] Install php-imap using yum or any on CentOS 7
by Vivek Patil 30 Jul '14

30 Jul '14

[epel] name=Extra Packages for Enterprise Linux 7 - $basearch #baseurl=http://download.fedoraproject.org/pub/epel/7/$basearch mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=epel-7&arch=$bas… failovermethod=priority enabled=1 gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-7 [epel-debuginfo] name=Extra Packages for Enterprise Linux 7 - $basearch - Debug #baseurl=http://download.fedoraproject.org/pub/epel/7/$basearch/debug mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=epel-debug-7&arc… failovermethod=priority enabled=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-7 gpgcheck=1 [epel-source] name=Extra Packages for Enterprise Linux 7 - $basearch - Source #baseurl=http://download.fedoraproject.org/pub/epel/7/SRPMS mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=epel-source-7&ar… failovermethod=priority enabled=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-7 gpgcheck=1 On 7/30/2014 5:46 PM, Reindl Harald wrote: > [epel] > name=Extra Packages for Enterprise Linux 7 - $basearch > # baseurl=http://download.fedoraproject.org/pub/epel/7/$basearch > mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=epel-7&arch=$bas… > failovermethod=priority > enabled=1 > gpgcheck=1 > gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-7

3 2

Re: [CentOS] Install php-imap using yum or any on CentOS 7
by Vivek Patil 30 Jul '14

30 Jul '14

Tryed all enable ( 0 to 1 ) but no luck > cat epel.repo [epel] name=Extra Packages for Enterprise Linux 6 - $basearch #baseurl=http://download.fedoraproject.org/pub/epel/6/$basearch mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=epel-6&arch=$bas… failovermethod=priority enabled=1 gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-6 [epel-debuginfo] name=Extra Packages for Enterprise Linux 6 - $basearch - Debug #baseurl=http://download.fedoraproject.org/pub/epel/6/$basearch/debug mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=epel-debug-6&arc… failovermethod=priority enabled=0 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-6 gpgcheck=1 [epel-source] name=Extra Packages for Enterprise Linux 6 - $basearch - Source #baseurl=http://download.fedoraproject.org/pub/epel/6/SRPMS mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=epel-source-6&ar… failovermethod=priority enabled=0 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-6 gpgcheck=1

3 2

Centos 7 - how to play mp3
by ambrogio cirillo 30 Jul '14

30 Jul '14

Dear Sirs, no way to play mp3 on Centos 7. I tried all suggestions w/o success! Could you please tell me how to? Thank you in advance. Best regards, Ambrus

6 5

Re: [CentOS] Install php-imap using yum or any on CentOS 7
by Vivek Patil 30 Jul '14

30 Jul '14

I tryied 7 also from the following link but no luck http://www.tecmint.com/how-to-enable-epel-repository-for-rhel-centos-6-5/ Please guide me if m going wrong On 7/30/2014 5:39 PM, Reindl Harald wrote: > Am 30.07.2014 13:41, schrieb Vivek Patil: >> Tryed all enable ( 0 to 1 ) but no luck >>> cat epel.repo >> [epel] >> name=Extra Packages for Enterprise Linux 6 - $basearch >> #baseurl=http://download.fedoraproject.org/pub/epel/6/$basearch > your subject mentions CentOS7 and you installed EPEL6 > just read what you post while you compose a mail >

2 1

Re: [CentOS] Install php-imap using yum or any on CentOS 7
by Vivek Patil 30 Jul '14

30 Jul '14

Thanks for reply. I have already added epel repo ( see attached file ) On 7/30/2014 4:54 PM, Reindl Harald wrote: > > Am 30.07.2014 13:10, schrieb Vivek Patil: >> Refer my subject line and help me out > just add the epel repo which can be called mandatory > for webservers since a lot of important packages are > only there > > Name: php-imap > Architektur: x86_64 > Version: 5.4.16 > Ausgabe: 2.el7 > Größe: 36 k > Quelle: epel/x86_64 >

1 0

Install php-imap using yum or any on CentOS 7
by Vivek Patil 30 Jul '14

30 Jul '14

Hi All, Refer my subject line and help me out. Vivek

1 0

[CentOS 6.5]mounting hgfs shares failed
by Theodore Si 30 Jul '14

30 Jul '14

Hi all, I instaled a CentOS 6.5 in Vmware and installed the vmware-tools. Howerver, when I start up, it gives me the message that mounting hgfs shares [failed] How do I solve this, any thoughts?

1 0

Shrinking a RAID array
by Stephen Harris 30 Jul '14

30 Jul '14

My google-fu appears to be weak today... I currently have 8*4Tb in a RAID6. So far I'm only using 6Tb PV VG Fmt Attr PSize PFree Used /dev/md6 Large lvm2 a-- 21.83t 15.37t 6.46t Let's say I wanted to remove 2 of these disks from the array and shrink it down to a 6*4Tb How would I do this? -- rgds Stephen

2 1

Convert "bare partition" to RAID1 / mdadm?
by Lists 30 Jul '14

30 Jul '14

I have a large disk full of data that I'd like to upgrade to SW RAID 1 with a minimum of downtime. Taking it offline for a day or more to rsync all the files over is a non-starter. Since I've mounted SW RAID1 drives directly with "mount -t ext3 /dev/sdX" it would seem possible to flip the process around, perhaps change the partition type with fdisk or parted, and remount as SW RAID1? I'm not trying to move over the O/S, just a data paritition with LOTS of data. So far, Google pounding has resulted in howtos like this one that's otherwise quite useful, but has a big "copy all your data over" step I'd like to skip: http://sysadmin.compxtreme.ro/how-to-migrate-a-single-disk-linux-system-to-… But it would seem to me that a sequence roughly like this should work without having to recopy all the files. 1) umount /var/data; 2) parted /dev/sdX (change type to fd - Linux RAID auto) 3) Set some volume parameters so it's seen as a RAID1 partition "Degraded". (parted?) 4) ??? Insert mdadm magic here ??? 5) Profit! `mount /dev/md1 /var/data` Wondering if anybody has done anything like this before... -Ben

12 23

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss July 2014