U-Boot SPL 2015.10 (Nov 26 2015 - 14:56:37) DRAM: 1024 MiB Failed to set core voltage! Can't set CPU frequency U-Boot 2015.10 (Nov 26 2015 - 14:56:37 -0500) Allwinner Technology CPU: Allwinner A20 (SUN7I) I2C: ready DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 *** Warning - bad CRC, using default environment Setting up a 720x576i composite-pal console (overscan 32x20) In: serial Out: vga Err: vga SCSI: SUNXI SCSI INIT SATA link 0 timeout. AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: ncq stag pm led clo only pmp pio slum part ccc apst Net: eth0: ethernet@01c50000 starting USB... USB0: USB EHCI 1.00 USB1: USB OHCI 1.0 USB2: USB EHCI 1.00 USB3: USB OHCI 1.0 scanning bus 0 for devices... 1 USB Device(s) found scanning bus 2 for devices... 1 USB Device(s) found Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf 333 bytes read in 201 ms (1000 Bytes/s) Ignoring unknown command: ui Ignoring malformed menu command: autoboot Ignoring unknown command: totaltimeout centos Options 1: centos Enter choice: 1: centos Retrieving file: /initramfs-4.2.3-200.el7.armv7hl.img 34922581 bytes read in 2654 ms (12.5 MiB/s) Retrieving file: /vmlinuz-4.2.3-200.el7.armv7hl 5866104 bytes read in 605 ms (9.2 MiB/s) append: enforcing=0 root=UUID=9359b607-7331-40ef-98d7-556faebff04d Retrieving file: /dtb-4.2.3-200.el7.armv7hl/sun7i-a20-bananapi.dtb 27103 bytes read in 3098 ms (7.8 KiB/s) Kernel image @ 0x42000000 [ 0x000000 - 0x598278 ] ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Ramdisk to 47eb1000, end 49fff055 ... OK Loading Device Tree to 47ea7000, end 47eb09de ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.2.3-200.el7.armv7hl (mockbuild@armv7-02.dev.centos.org) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-4) (GCC) ) #1 SMP Wed Nov 25 18:01:515 [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: LeMaker Banana Pi [ 0.000000] cma: Reserved 16 MiB at 0x7e800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] PERCPU: Embedded 12 pages/cpu @eeec6000 s19840 r8192 d21120 u49152 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260028 [ 0.000000] Kernel command line: enforcing=0 root=UUID=9359b607-7331-40ef-98d7-556faebff04d [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 972612K/1046952K available (7326K kernel code, 1075K rwdata, 3288K rodata, 1040K init, 843K bss, 57956K reserved, 16384K cma-reserved, 252328K h) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0c65b74 (10615 kB) [ 0.000000] .init : 0xc0c66000 - 0xc0d6a000 (1040 kB) [ 0.000000] .data : 0xc0d6a000 - 0xc0e76ed0 (1076 kB) [ 0.000000] .bss : 0xc0e76ed0 - 0xc0f49c9c ( 844 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-1. [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000014] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000043] Switching to timer-based delay loop, resolution 41ns [ 0.005697] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.007537] clocksource: hstimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 12741736309 ns [ 0.008651] Console: colour dummy device 80x30 [ 0.011193] console [tty0] enabled [ 0.011288] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 0.011432] pid_max: default: 32768 minimum: 301 [ 0.011798] Security Framework initialized [ 0.011879] SELinux: Initializing. [ 0.012033] Yama: becoming mindful. [ 0.012555] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.012653] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.014543] Initializing cgroup subsys blkio [ 0.014650] Initializing cgroup subsys memory [ 0.014788] Initializing cgroup subsys devices [ 0.014876] Initializing cgroup subsys freezer [ 0.014959] Initializing cgroup subsys net_cls [ 0.015041] Initializing cgroup subsys perf_event [ 0.015132] Initializing cgroup subsys net_prio [ 0.015330] CPU: Testing write buffer coherency: ok [ 0.015480] ftrace: allocating 30543 entries in 60 pages [ 0.106923] /cpus/cpu@0 missing clock-frequency property [ 0.107037] /cpus/cpu@1 missing clock-frequency property [ 0.107112] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.107308] Setting up static identity map for 0x40208280 - 0x40208318 [ 0.121167] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.121479] Brought up 2 CPUs [ 0.121621] SMP: Total of 2 processors activated (96.00 BogoMIPS). [ 0.121684] CPU: All CPU(s) started in HYP mode. [ 0.121741] CPU: Virtualization extensions available. [ 0.123597] devtmpfs: initialized [ 0.142877] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4 [ 0.144633] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns [ 0.147194] atomic64_test: passed [ 0.147508] pinctrl core: initialized pinctrl subsystem [ 0.151832] NET: Registered protocol family 16 [ 0.156717] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.184800] No ATAGs? [ 0.184903] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.185050] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.189096] Serial: AMBA PL011 UART driver [ 0.223882] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.224098] reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.226262] reg-fixed-voltage gmac-3v3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/gmac_power_pin@0, deferring probe [ 0.232854] vgaarb: loaded [ 0.235421] SCSI subsystem initialized [ 0.236854] usbcore: registered new interface driver usbfs [ 0.237079] usbcore: registered new interface driver hub [ 0.237340] usbcore: registered new device driver usb [ 0.241766] NetLabel: Initializing [ 0.241845] NetLabel: domain hash size = 128 [ 0.241903] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.242167] NetLabel: unlabeled traffic allowed by default [ 0.243295] clocksource: Switched to clocksource arch_sys_counter [ 0.377154] simple-framebuffer 7fe79000.framebuffer: framebuffer at 0x7fe79000, 0x178e00 bytes, mapped to 0xf0200000 [ 0.377304] simple-framebuffer 7fe79000.framebuffer: format=x8r8g8b8, mode=656x536x32, linelength=2880 [ 0.394873] Console: switching to colour frame buffer device 82x33 [ 0.410046] simple-framebuffer 7fe79000.framebuffer: fb0: simplefb registered! [ 0.443091] NET: Registered protocol family 2 [ 0.445459] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.455583] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.465555] TCP: Hash tables configured (established 8192 bind 8192) [ 0.475380] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.485115] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.495314] NET: Registered protocol family 1 [ 0.505890] RPC: Registered named UNIX socket transport module. [ 0.515272] RPC: Registered udp transport module. [ 0.524273] RPC: Registered tcp transport module. [ 0.532886] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.542557] Unpacking initramfs... [ 6.338784] Freeing initrd memory: 34108K (c7eb1000 - ca000000) [ 6.348195] hw perfevents: Failed to parse /pmu/interrupt-affinity[0] [ 6.357118] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 6.379732] futex hash table entries: 512 (order: 3, 32768 bytes) [ 6.389587] audit: initializing netlink subsys (disabled) [ 6.399257] audit: type=2000 audit(6.355:1): initialized [ 6.438024] zpool: loaded [ 6.447560] zbud: loaded [ 6.458496] VFS: Disk quotas dquot_6.6.0 [ 6.468197] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 6.482443] NFS: Registering the id_resolver key type [ 6.491599] Key type id_resolver registered [ 6.500309] Key type id_legacy registered [ 6.508822] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 6.519110] Key type big_key registered [ 6.591466] NET: Registered protocol family 38 [ 6.600171] bounce: pool size: 64 pages [ 6.608955] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 6.625599] io scheduler noop registered [ 6.633799] io scheduler deadline registered [ 6.642343] io scheduler cfq registered (default) [ 6.662569] sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 6.680049] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 6.714185] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 41, base_baud = 1500000) is a U6_16550A [ 7.523329] console [ttyS0] enabled [ 7.548538] 1c28c00.serial: ttyS1 at MMIO 0x1c28c00 (irq = 42, base_baud = 1500000) is a U6_16550A [ 7.599896] 1c29c00.serial: ttyS2 at MMIO 0x1c29c00 (irq = 43, base_baud = 1500000) is a U6_16550A [ 7.627341] Serial: AMBA driver [ 7.640850] msm_serial: driver initialized [ 7.660890] libphy: Fixed MDIO Bus: probed [ 7.674917] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 7.690417] ehci-pci: EHCI PCI platform driver [ 7.703863] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 7.719025] ohci-pci: OHCI PCI platform driver [ 7.732376] uhci_hcd: USB Universal Host Controller Interface driver [ 7.748374] usbcore: registered new interface driver usbserial [ 7.763482] usbcore: registered new interface driver usbserial_generic [ 7.779000] usbserial: USB Serial support registered for generic [ 7.794537] mousedev: PS/2 mouse device common for all mice [ 7.816072] device-mapper: uevent: version 1.0.3 [ 7.831024] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com [ 7.858405] ledtrig-cpu: registered to indicate activity on CPUs [ 7.873785] hidraw: raw HID events driver (C) Jiri Kosina [ 7.889114] usbcore: registered new interface driver usbhid [ 7.904076] usbhid: USB HID core driver [ 7.921372] drop_monitor: Initializing network drop monitor service [ 7.937678] ip_tables: (C) 2000-2006 Netfilter Core Team [ 7.952448] Initializing XFRM netlink socket [ 7.968171] NET: Registered protocol family 10 [ 7.984392] mip6: Mobile IPv6 [ 7.996240] NET: Registered protocol family 17 [ 8.009505] Key type dns_resolver registered [ 8.023140] ThumbEE CPU extension supported. [ 8.035649] Registering SWP/SWPB emulation handler [ 8.051032] registered taskstats version 1 [ 8.063577] zswap: loading zswap [ 8.074965] zswap: using zbud pool [ 8.086374] zswap: using lzo compressor [ 8.102949] hctosys: unable to open rtc device (rtc0) [ 8.116611] sr_init: No PMIC hook to init smartreflex [ 8.129762] sr_init: platform driver register failed for SR [ 8.157238] gmac-3v3: disabling [ 8.167984] usb2-vbus: disabling [ 8.178767] usb1-vbus: disabling [ 8.189240] vcc5v0: disabling [ 8.199415] vcc3v3: disabling [ 8.209216] vcc3v0: disabling [ 8.222607] Freeing unused kernel memory: 1040K (c0c66000 - c0d6a000) [ 8.265390] random: systemd urandom read with 0 bits of entropy available [ 8.290722] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4) [ 8.330701] systemd[1]: Detected architecture arm. [ 8.342557] systemd[1]: Running in initial RAM disk. Welcome to CentOS Linux 7 (Core) dracut-033-359.el7 (Initramfs)! [ 8.368699] systemd[1]: No hostname configured. [ 8.380171] systemd[1]: Set hostname to . [ 8.392307] systemd[1]: Initializing machine ID from random generator. [ OK ] Reached target Local File Systems. [ 8.928686] systemd[1]: Reached target Local File Systems. [ 8.941330] systemd[1]: Starting Local File Systems. [ OK ] Reached target Timers. [ 8.963638] systemd[1]: Reached target Timers. [ 8.975039] systemd[1]: Starting Timers. [ OK ] Created slice -.slice. [ 8.998671] systemd[1]: Created slice -.slice. [ 9.009984] systemd[1]: Starting -.slice. [ OK ] Listening on Journal Socket. [ 9.033694] systemd[1]: Listening on Journal Socket. [ 9.045633] systemd[1]: Starting Journal Socket. [ OK ] Listening on udev Kernel Socket. [ 9.068684] systemd[1]: Listening on udev Kernel Socket. [ 9.080973] systemd[1]: Starting udev Kernel Socket. [ OK ] Created slice System Slice. [ 9.103649] systemd[1]: Created slice System Slice. [ 9.115369] systemd[1]: Starting System Slice. [ 9.133739] systemd[1]: Starting Setup Virtual Console... Starting Setup Virtual Console... [ OK ] Reached target Slices. [ 9.163846] systemd[1]: Reached target Slices. [ 9.176142] systemd[1]: Starting Slices. [ 9.188790] systemd[1]: Started Load Kernel Modules. [ 9.201305] systemd[1]: Started dracut ask for additional cmdline parameters. [ 9.223541] systemd[1]: Starting Journal Service... Starting Journal Service... [ 9.253862] systemd[1]: Starting dracut cmdline hook... Starting dracut cmdline hook... [ OK ] Listening on udev Control Socket. [ 9.293787] systemd[1]: Listening on udev Control Socket. [ 9.328642] systemd[1]: Starting udev Control Socket. [ OK ] Reached target Sockets. [ 9.353803] systemd[1]: Reached target Sockets. [ 9.383770] systemd[1]: Starting Sockets. [ 9.441944] systemd[1]: Starting Create list of required static device nodes for the current kernel... Starting Create list of required st... nodes for the current kernel... [ 9.488860] systemd[1]: Starting Apply Kernel Variables... Starting Apply Kernel Variables... [ OK ] Reached target Swap. [ 9.518952] systemd[1]: Reached target Swap. [ 9.548779] systemd[1]: Starting Swap. [ OK ] Started Journal Service. [ 9.588868] systemd[1]: Started Journal Service. [ OK ] Started Setup Virtual Console. [ OK ] Started Create list of required sta...ce nodes for the current kernel. [ OK ] Started Apply Kernel Variables. Starting Create Static Device Nodes in /dev... [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started dracut cmdline hook. Starting dracut pre-udev hook... [ OK ] Started dracut pre-udev hook. Starting udev Kernel Device Manager... [ OK ] Started udev Kernel Device Manager. Starting udev Coldplug all Devices... [ OK ] Started udev Coldplug all Devices. [ OK ] Reached target System Initialization. Starting dracut initqueue hook... Starting Show Plymouth Boot Screen... [ OK ] Started Show Plymouth Boot Screen. [ OK ] Reached target Paths. [ OK ] Reached target Basic System. Mounting Configuration File System... [ OK ] Mounted Configuration File System. [ 12.295847] ehci-platform: EHCI generic platform driver [ 12.302150] ohci-platform: OHCI generic platform driver [ 12.345231] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0 [ 12.358796] sunxi-rtc 1c20d00.rtc: RTC enabled [ 12.384329] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found [ 12.401228] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 12.432171] pps_core: LinuxPPS API ver. 1 registered [ 12.443921] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 12.473812] sunxi-mmc 1c0f000.mmc: base:0xf01ae000 irq:27 [ 12.494667] PTP clock support registered [ 12.515673] mmc0: host does not support reading read-only switch, assuming write-enable [ 12.551393] mmc0: new high speed SDHC card at address 0007 [ 12.578902] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 12.602450] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 12.625043] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 12.650285] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 12.688831] scsi host0: ahci-sunxi [ 12.713559] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 30 [ 12.750398] axp20x 0-0034: AXP20x variant AXP209 found [ 12.767309] axp20x 0-0034: Failed to set masks in 0x40: -6 [ 12.782446] axp20x 0-0034: failed to add irq chip: -6 GG[ 12.891983] mmcblk0: mmc0:0007 SD04G 3.70 GiB [ 12.911365] mmcblk0: p1 p2 p3 [ 12.923980] sun7i-dwmac 1c50000.ethernet: no reset control found [ 12.941911] Ring mode enabled [ 12.954417] No HW DMA feature register supported [ 12.959417] Normal descriptors [ 12.981106] TX Checksum insertion supported [ 13.045777] libphy: stmmac: probed [ 13.058500] eth0: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active [ 13.063454] ata1: SATA link down (SStatus 0 SControl 300) [ 13.088879] eth0: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01) [ OK ] Found device /dev/disk/by-uuid/9359b607-7331-40ef-98d7-556faebff04d. [ OK ] Started dracut initqueue hook. [ OK ] Reached target Remote File Systems (Pre). [ OK ] Reached target Remote File Systems. Starting File System Check on /dev/...7-7331-40ef-98d7-556faebff04d... [ OK ] Started File System Check on /dev/d...607-7331-40ef-98d7-556faebff04d. Mounting /sysroot... [ 15.508890] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ OK ] Mounted /sysroot. [ OK ] Reached target Initrd Root File System. Starting Reload Configuration from the Real Root... [ OK ] Started Reload Configuration from the Real Root. [ OK ] Reached target Initrd File Systems. [ OK ] Reached target Initrd Default Target. Starting dracut pre-pivot and cleanup hook... [ OK ] Started dracut pre-pivot and cleanup hook. [ OK ] Stopped udev Kernel Device Manager. Starting udev Kernel Device Manager... Starting Cleaning Up and Shutting Down Daemons... [ OK ] Started udev Kernel Device Manager. Starting Plymouth switch root service... [ OK ] Stopped target Timers. [ OK ] Stopped Cleaning Up and Shutting Down Daemons. [ OK ] Stopped dracut pre-pivot and cleanup hook. Stopping dracut pre-pivot and cleanup hook... [ OK ] Stopped target Initrd Default Target. [ OK ] Stopped target Remote File Systems. [ OK ] Stopped target Remote File Systems (Pre). [ OK ] Stopped target Basic System. [ OK ] Stopped target Slices. [ OK ] Stopped target Sockets. [ OK ] Stopped target Paths. [ OK ] Stopped target System Initialization. [ OK ] Stopped target Local File Systems. Stopping udev Kernel Device Manager... [ OK ] Stopped target Swap. [ OK ] Stopped Apply Kernel Variables. Stopping Apply Kernel Variables... [ OK ] Stopped dracut initqueue hook. Stopping dracut initqueue hook... [ OK ] Stopped udev Coldplug all Devices. Stopping udev Coldplug all Devices... [ OK ] Stopped udev Kernel Device Manager. [ OK ] Started Plymouth switch root service. [ OK ] Stopped dracut pre-udev hook. Stopping dracut pre-udev hook... [ OK ] Stopped dracut cmdline hook. Stopping dracut cmdline hook... [ OK ] Stopped Create Static Device Nodes in /dev. Stopping Create Static Device Nodes in /dev... [ OK ] Stopped Create list of required sta...ce nodes for the current kernel. Stopping Create list of required st... nodes for the current kernel... [ OK ] Closed udev Kernel Socket. [ OK ] Closed udev Control Socket. Starting Cleanup udevd DB... [ OK ] Started Cleanup udevd DB. [ OK ] Reached target Switch Root. Starting Switch Root... [ 18.173780] systemd-journald[112]: Received SIGTERM from PID 1 (systemd). [ 19.917967] SELinux: Class netlink_iscsi_socket not defined in policy. [ 19.931871] SELinux: Class netlink_fib_lookup_socket not defined in policy. [ 19.946202] SELinux: Class netlink_connector_socket not defined in policy. [ 19.960452] SELinux: Class netlink_netfilter_socket not defined in policy. [ 19.974590] SELinux: Class netlink_generic_socket not defined in policy. [ 19.988604] SELinux: Class netlink_scsitransport_socket not defined in policy. [ 20.003227] SELinux: Class netlink_rdma_socket not defined in policy. [ 20.017118] SELinux: Class netlink_crypto_socket not defined in policy. [ 20.031313] SELinux: Permission audit_read in class capability2 not defined in policy. [ 20.054161] SELinux: Class binder not defined in policy. [ 20.067282] SELinux: the above unknown classes and permissions will be allowed [ 20.158985] audit: type=1403 audit(20.115:2): policy loaded auid=4294967295 ses=4294967295 [ 20.233783] systemd[1]: Successfully loaded SELinux policy in 1.532326s. [ 20.966767] systemd[1]: Relabelled /dev and /run in 418.483ms. Welcome to CentOS Linux 7 (Core)! [ OK ] Stopped Switch Root. Mounting POSIX Message Queue File System... [ OK ] Stopped Flush Journal to Persistent Storage. [ OK ] Stopped Journal Service. Starting Journal Service... [ OK ] Stopped File System Check on Root Device. Stopping File System Check on Root Device... [ OK ] Stopped target Switch Root. [ OK ] Stopped target Initrd File Systems. [ OK ] Listening on udev Kernel Socket. [ OK ] Listening on Delayed Shutdown Socket. Starting Collect Read-Ahead Data... [ OK ] Listening on udev Control Socket. [ OK ] Reached target Remote File Systems. [ OK ] Created slice system-getty.slice. [ 22.356530] audit: type=1400 audit(22.310:3): avc: denied { read } for pid=349 comm="systemd-journal" name="run" dev="mmcblk0p3" ino=367 scontext=system_u:system1 [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Stopped target Initrd Root File System. [ OK ] Created slice system-serial\x2dgetty.slice. Starting Create list of required st... nodes for the current kernel... [ OK ] Created slice User and Session Slice. [ OK ] Reached target Encrypted Volumes. [ OK ] Set up automount Arbitrary Executab...ats File System Automount Point. Mounting Debug File System... [ OK ] Reached target Slices. [ OK ] Mounted Debug File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Started Collect Read-Ahead Data. [ OK ] Started Journal Service. [ OK ] Started Create list of required sta...ce nodes for the current kernel. Starting Remount Root and Kernel File Systems... Starting Create Static Device Nodes in /dev... Starting Apply Kernel Variables... [ 22.936380] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) [ OK ] Started Remount Root and Kernel File Systems. [ 22.986753] random: nonblocking pool is initialized Starting Flush Journal to Persistent Storage... Starting Rebuild Dynamic Linker Cache... Starting Rebuild Hardware Database... Starting Load/Save Random Seed... Starting Configure read-only root support... [ OK ] Started Apply Kernel Variables. [ OK ] Started Load/Save Random Seed. [ 23.507800] systemd-journald[349]: Received request to flush runtime journal from PID 1 [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Configure read-only root support. [ OK ] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). [ OK ] Started Rebuild Dynamic Linker Cache. [ OK ] Started udev Kernel Device Manager. [ OK ] Started Rebuild Hardware Database. Starting udev Coldplug all Devices... [ OK ] Started udev Coldplug all Devices. [ 31.342054] cpufreq: cpufreq_add_dev: CPU0: Running at unlisted freq: 384000 KHz [ 31.388035] cpufreq: cpufreq_add_dev: CPU0: Unlisted initial frequency changed to: 528000 KHz