[Bulk] [CentOS] hda dma seek errors
BRUCE STANLEY
bruce.stanley at prodigy.net
Wed Aug 3 16:02:04 UTC 2005
--- Manuel BERTRAND <manuel.bertrand at lif.univ-mrs.fr> wrote:
> Bryan J. Smith wrote:
>
> >- Multiple ATA devices on a channel conflicting
> >
> >
> Right, I forgot this one. Check if you don't have an old cd-drive on
> the same IDE cable.
>
> >- Hdparm optimizing the ATA channel and IDE disk incorrectly
> >
> >
> Did you tweak this?
>
> >- Many, many others
> >
> >But in every case I had, when the drive _had_ worked prior
> >without issue, it was a kernel upgrade and that ATA driver.
> >As I mentioned before, there have been many documented cases
> >of this, as well as the politics of the ATA code in the
> >kernel (around 2.4.18-19 IIRC).
> >
> >
> >
> >
Hi Manuel!
My IDE set up is as follows:
IDE channel 0 -- IBM 40GB UDMA 100 7200 RPM drive 2MB buffer
--- Segate 120GM UDMA 100 7000 RPM drive 8MB buffer
IDE channel 1 --- TDK CD-ROM drive 24X
--- TDK CD-RW drive 16x burn, 48x read
Both controller cables are UDMA 100 compatible.
More information about the CentOS
mailing list