[CentOS] x86_64 kernel compilation

John Logsdon j.logsdon at quantex-research.com
Thu Dec 8 14:04:30 UTC 2005


Thanks for that Johnny.  

It didn't work to start with, even after make clean, and I had to remove
the tree, reinstall and repatch it to get it to work but xconfig is
running now.  Phew!  This has been bugging me for ages.  Fortunately it's
a development machine and I have been busy elsewhere.

It's a puzzle that that error has been around for so long - almost 2
years.  I thought one of the many benefits of open source is that such
things are fixed much quicker than proprietory software, if only to avoid
the embarassment as the authors are all identified.:-((

Despite inheriting the code from a well know upstream provider, is there
any chance that this is fixed permanently in CentOS before being packaged
up?  After all, x86_64's are becoming quite popular now.  Or maybe it is
present in other platforms as well...

Best wishes

John

John Logsdon                               "Try to make things as simple
Quantex Research Ltd, Manchester UK         as possible but not simpler"
j.logsdon at quantex-research.com              a.einstein at relativity.org
+44(0)161 445 4951/G:+44(0)7717758675       www.quantex-research.com


On Thu, 8 Dec 2005, Johnny Hughes wrote:

> On Thu, 2005-12-08 at 08:26 +0000, John Logsdon wrote: 
> > If I can squeeze a message between the discussions on security (:-)) I
> > have been trying to compile a kernel on an x86_64 box under CentOS4.1 and
> > now 4.2.  
> > 
> > The problem is that neither make xconfig or make gconfig work:
> > 
> > make gconfig
> > *
> > * Unable to find the GTK+ installation. Please make sure that
> > * the GTK+ 2.0 development package is correctly installed...
> > * You need gtk+-2.0, glib-2.0 and libglade-2.0.
> > *   
> > make[1]: *** [scripts/kconfig/.tmp_gtkcheck] Error 1
> > make: *** [gconfig] Error 2
> > 
> > and a similar message for xconfig:
> > 
> > make xconfig
> >   HOSTLD  scripts/kconfig/qconf
> > /usr/bin/ld: cannot find -lqt
> > collect2: ld returned 1 exit status
> > make[1]: *** [scripts/kconfig/qconf] Error 1
> > make: *** [xconfig] Error 2
> > 
> > Yet I have the following libraries installed:
> > 
> > compat-glibc.i386                        1:2.3.2-95.30          installed       
> > compat-glibc.x86_64                      1:2.3.2-95.30          installed       
> > compat-glibc-headers.x86_64              1:2.3.2-95.30          installed       
> > glibc.i686                               2.3.4-2.13             installed       
> > glibc.x86_64                             2.3.4-2.13             installed       
> > glibc-common.x86_64                      2.3.4-2.13             installed       
> > glibc-devel.x86_64                       2.3.4-2.13             installed       
> > glibc-devel.i386                         2.3.4-2.13             installed       
> > glibc-headers.x86_64                     2.3.4-2.13             installed       
> > glibc-kernheaders.x86_64                 2.4-9.1.98.EL          installed       
> > glibc-utils.x86_64                       2.3.4-2.13             installed       
> > gtk+.i386                                1:1.2.10-33            installed       
> > gtk+.x86_64                              1:1.2.10-33.centos4    installed       
> > gtk+-devel.x86_64                        1:1.2.10-33.centos4    installed       
> > gtk-engines.i386                         1:0.12-6.el4           installed       
> > gtk-engines.x86_64                       1:0.12-6.el4           installed       
> > gtk2.x86_64                              2.4.13-18              installed       
> > gtk2.i386                                2.4.13-18              installed       
> > gtk2-devel.x86_64                        2.4.13-18              installed       
> > gtk2-engines.x86_64                      2.2.0-7.el4            installed       
> > gtk2-engines.i386                        2.2.0-7.el4            installed       
> > libglade2.i386                           2.4.0-5                installed       
> > libglade2.x86_64                         2.4.0-5                installed       
> > pygtk2.x86_64                            2.4.0-1                installed       
> > pygtk2-libglade.x86_64                   2.4.0-1                installed       
> > 
> > 
> > Since menuconfig is totally unusable, I am quite stuck.  I have regularly
> > compiled on an x86 box with virtually identical installation and I have
> > compared the libraries but can't see what I have missed.
> 
> I use this all the time and it works OK for me.  Been using it for at
> least 5 years and it is not as pretty as the other 2 options, but works
> fine :)
> 
> > 
> > The kernel version is 2.6.14.3 which is the latest stable but this happens
> > with older kernels.  There have been suggestions of various patches to a
> > makefile which I have tried but to no avail.  So I think it may be a
> > library issue.
> > 
> > So can anyone with an x86_64 box on which they have successfully compiled
> > a kernel post me their output from:
> > 
> > yum list | egrep gtk\|glibc\|glade | grep installed
> > 
> > ... or even the complete yum list (privately to save bandwidth!)
> > 
> There is a bug in the code :)
> 
> This fixed it for me:
> 
> http://www.fedoraforum.org/forum/archive/index.php/t-466.html
> 
> (that is, edit the file $BUILD_DIR/scripts/kconfig/Makefile and search
> for  print-multi-os-directory and take out the space for between:
> 
> $(HOSTCXX)   and -print-multi-os-directory 
> 
> so that the lines look like that posted in the above link.
> --------------
> I also submitted this as a confirmed bug so that others can find it at
> bugs.centos.org
> 




More information about the CentOS mailing list