Betr.: [CentOS] IP Problems - Address won't stick on reboots!
Thom van der Boon
thom at vdb.nlFri Jun 10 23:10:28 UTC 2005
- Previous message: [CentOS] Re 2GB R3000z RAM problem booting.
- Next message: Betr.: [CentOS] IP Problems - Address won't stick on reboots!
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
The file to edit is /etc/sysconfig/network-scripts/ifcfg-eth0 It should look something like this. You should edit it with your settings DEVICE=eth0 BOOTPROTO=static BROADCAST=xxx.xxx.xx.255 HWADDR=xx:xx:xx:xx:xx:xx IPADDR=xxx.xx.xx.xxx NETMASK=255.255.255.0 NETWORK=xxx.xxx.xx.0 ONBOOT=yes TYPE=Ethernet Thom van der Boon E-Mail: Thom.van.der.Boon at vdb.nl ===== Thom.H. van der Boon b.v. Havens 563 Jan Evertsenweg 2-4 NL-3115 JA Schiedam Tel.: +31 (0)10 4272727 Fax: +31 (0)10 4736620 E-Mail: info at vdb.nl Home Page: http://www.vdb.nl/ >>> scott.heisler at huntleighusa.com 10.06.2005 22:52:34 >>> Centos 4.0 P4 Dual Xeon 2gig Ram One 100mb NIC The problem is that the nic won't hold a fixed IP address. What I mean is that if I refresh it, after booting up by typing "ifdown eth0" and then "ifup eth0" - it then reflects the correct IP address. However, it won't 'have' and IP address upon boot. Also, it seems to hang on the logger service starting up. It sits there attempting to start logger for like 3-4 minutes (timed!). I suspect this problem is most likely related to the IP problem. I've tried moving the network connection to a dedicated HUB and still no luck. What is the correct config file to edit to set the IP address correctly? I tried editing the one in /etc/sysconfig/network-scripts - but that didn't fix my problem. Thanks. Scott _______________________________________________ CentOS mailing list CentOS at centos.org http://lists.centos.org/mailman/listinfo/centos -------------- next part -------------- A non-text attachment was scrubbed... Name: Thom van der Boon.vcf Type: text/x-vcard Size: 147 bytes Desc: not available URL: <http://lists.centos.org/pipermail/centos/attachments/20050611/a191fea6/attachment.vcf>
- Previous message: [CentOS] Re 2GB R3000z RAM problem booting.
- Next message: Betr.: [CentOS] IP Problems - Address won't stick on reboots!
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the CentOS mailing list