[CentOS] PE-2850 to AX100 via Qlogic Card (QLA200 HBA) on CentOS 4.1

Johnny Hughes mailing-lists at hughesjr.com
Mon Oct 10 12:22:40 UTC 2005


On Mon, 2005-10-10 at 14:19 +0200, kadafax wrote:
> Johnny Hughes wrote:
> 
> >
> >
> >The driver should work on both CentOS and RHEL ... was it written for a
> >specific kernel?
> >
> ---
> # pwd
> /mnt/cdrom/files/common/files/linux
> # rpm -Uvh qla2x00-v7.00.01-3.i686.rpm
> Preparing...                ########################################### 
> [100%]
> error: %pre(qla2x00-v7.00.01-3.i686) scriptlet failed, exit status 255
> error:   install: %pre scriptlet failed (2), skipping qla2x00-v7.00.01-3
> ---
> 
> ok I am on a X86-64 arch, this may explain the above behavior ?
> 
> 
If you installed the x86_64 arch ... Yes, it looks like that RPM was
written for an i686 kernel.

Where did you get the RPM?  Do that have a SRPM?  Do they have an RPM
for x86_64.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
Url : http://lists.centos.org/pipermail/centos/attachments/20051010/70ed5a08/attachment.bin


More information about the CentOS mailing list