[CentOS] Can I install CentOS 4.2 on Sun X4100?

Sungsoo Kim

kiss at imageclick.com
Sat Jan 7 03:47:20 UTC 2006


Hi, all!

I want to change current RHEL 4.0 ES  into CentOS 4.2 on Sun X4100 server.
The server has SAS SCSI based two 2.5" hard disks.
I could only install RHEL 4.0 Update 1 because the server is equipped with
RHEL 4.0 Update 1's device driver only.

I've included below the boot process messages concerned with SCSI controller.
If it's possible for me to install CentOS 4.0 on my X4100, I am ready to
switch to it.

TIA


Sungsoo Kim


-------------------

SCSI subsystem initialized
Fusion MPT base driver 3.02.18
Copyright (c) 1999-2005 LSI Logic Corporation
ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 28 (level, low) -> IRQ 209
mptbase: Initiating ioc0 bringup
ioc0: SAS1064: Capabilities={Initiator}
Fusion MPT SCSI Host driver 3.02.18
scsi0 : ioc0: LSISAS1064, FwRev=01040000h, Ports=1, MaxQ=203, IRQ=209
  Vendor: FUJITSU   Model: MAV2073RCSUN72G   Rev: 0301
  Type:   Direct-Access                      ANSI SCSI revision: 04
SCSI device sda: 143374738 512-byte hdwr sectors (73408 MB)
SCSI device sda: drive cache: write through
 sda: sda1 sda2 sda3
Attached scsi disk sda at scsi0, channel 0, id 2, lun 0
  Vendor: FUJITSU   Model: MAV2073RCSUN72G   Rev: 0301
  Type:   Direct-Access                      ANSI SCSI revision: 04
SCSI device sdb: 143374738 512-byte hdwr sectors (73408 MB)
SCSI device sdb: drive cache: write through
 sdb: sdb1
Attached scsi disk sdb at scsi0, channel 0, id 3, lun 0


More information about the CentOS mailing list