[CentOS] Configuring Multiple Gateways

Wed Nov 22 22:22:22 UTC 2006
Gary Richardson <gary.richardson at gmail.com>

You may be able to do something with the 'ip' command. In particular, I
think you need to do some googling for "source routing" or something
similar.

Typically you can only have one active default gateway and you need to use
something like BGP so your box knows which route is the shortest to a
destination. Either that, or you'll have to manually pick which route a
particular subnet takes.

Is this primarily for incoming or outgoing traffic? If it's outgoing, you
can probably do some load sharing. If it's incoming, you'll probably want to
rethink what you're doing.

On 11/22/06, Matthew Martz <mdmartz at gflug.net> wrote:
>
> I'm in need of installing two NICs in a machine that are connected to 2
> different public networks and I need both IP addresses accessible from the
> outside.  The IPs are part of two completely different subnets.
>
> For example:
> eth0
>      IP - 10.10.10.2/30
>      GW - 10.10.10.1
>
> eth1
>      IP - 20.20.20.6/30
>      GW - 20.20.20.5
>
> How can I configure 2 gateways on this server?
>
> Thanks!
> --
> Matthew Martz
> CentOS Mirror Admin
> mdmartz at gflug.net
>
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org
> http://lists.centos.org/mailman/listinfo/centos
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.centos.org/pipermail/centos/attachments/20061122/86ba0ada/attachment-0005.html>