[CentOS] Re: Cannot re-make a software raid pair
Nigel Kendrick
support-lists at petdoctors.co.uk
Thu Oct 5 22:48:35 UTC 2006
-----Original Message-----
From: centos-bounces at centos.org [mailto:centos-bounces at centos.org] On Behalf
Of Scott Silva
Sent: Thursday, October 05, 2006 11:15 PM
To: centos at centos.org
Subject: [CentOS] Re: Cannot re-make a software raid pair
Nigel Kendrick spake the following on 10/5/2006 12:45 PM:
> Apologies if you get this twice - the first one didn't seem to make it...
>
> Hi Guys,
>
> I have just replaced a faulty Max...woah, wait...this one's a
> Seagate... IDE hard disk but I cannot remake the software raid pair.
>
> The currently running disk is hda and I am trying to add back hdg -
> both are master drives on separate controllers.
>
> I have run fdisk on hdg and created the same partition structure as
> had and changed their types to 'fd' but when I try and rebuild the array I
get:
>
> mdadm /dev/md0 -a /dev/hdg1
>
> mdadm: hot add failed for /dev/hdg1: Invalid argument
>
> If I look at /var/log/messages, I have:
>
> Oct 5 16:04:39 petdoctors kernel: md: could not bd_claim hdg1.
> Oct 5 16:04:39 petdoctors kernel: md: error, md_import_device()
> returned
> -16
>
>>From other postings, this seems to imply the hdg1 partition is mounted
>>but I
> can find no evidence of this (df or cat /proc/mounts or lsof). I have
> done sone googling and found others having fun with this but no
> specific solution.
>
> Anyone?
Maybe the table didn't get re-read after fdisk was done. I usually use
sfdisk just because I can copy a partition table without making my usual
fat-fingered typos. Are you sure that the new drive isn't smaller than the
old? Even by a few cylinders.
--
Hi Scott,
Disks are 100% identical - right down to the last cylinder...hda is the live
disk and hdg is the new one...
[root at petdoctors ~]# sfdisk --no-reread /dev/hda
Disk /dev/hda: 24321 cylinders, 255 heads, 63 sectors/track
Old situation:
Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0
Device Boot Start End #cyls #blocks Id System
/dev/hda1 * 0+ 12 13- 104391 fd Linux raid autodetect
/dev/hda2 13 273 261 2096482+ 82 Linux swap
/dev/hda3 274 24320 24047 193157527+ fd Linux raid autodetect
/dev/hda4 0 - 0 0 0 Empty
Input in the following format; absent fields get a default value.
<start> <size> <type [E,S,L,X,hex]> <bootable [-,*]> <c,h,s> <c,h,s>
Usually you only need to specify <start> and <size> (and perhaps <type>).
/dev/hda1 :
[root at petdoctors ~]# sfdisk /dev/hdg
Checking that no-one is using this disk right now ...
OK
Disk /dev/hdg: 24321 cylinders, 255 heads, 63 sectors/track
Old situation:
Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0
Device Boot Start End #cyls #blocks Id System
/dev/hdg1 0+ 12 13- 104391 fd Linux raid autodetect
/dev/hdg2 13 273 261 2096482+ 82 Linux swap
/dev/hdg3 274 24320 24047 193157527+ fd Linux raid autodetect
/dev/hdg4 0 - 0 0 0 Empty
Input in the following format; absent fields get a default value.
<start> <size> <type [E,S,L,X,hex]> <bootable [-,*]> <c,h,s> <c,h,s>
Usually you only need to specify <start> and <size> (and perhaps <type>).
/dev/hdg1 :
[root at petdoctors ~]# mdadm /dev/md1 -a /dev/hdg3
mdadm: hot add failed for /dev/hdg3: Invalid argument
[root at petdoctors ~]#
More information about the CentOS
mailing list