[CentOS] Re: smartd stalls the system on reboot
Scott Silva
ssilva at sgvwater.com
Wed Apr 18 19:56:09 UTC 2007
Mark Hull-Richter spake the following on 4/18/2007 11:27 AM:
> On 4/18/07, *Scott Silva*
> <ssilva at sgvwater.com
> <mailto:ssilva at sgvwater.com>> wrote:
>
> > The smart bios option is usually only to give you an error message
> on boot.
> > Sendmail start delays are usually related to name resolution, and can
> > sometimes be related to entries in /etc/hosts.
>
>
> Here's mine:
>
> # Do not remove the following line, or various programs
> # that require network functionality will fail.
> 69.234.27.32 <http://69.234.27.32> mhrichter
Do you have a FQDN for this one? Might not be necessary, but worth a shot.
> 127.0.0.1 <http://127.0.0.1> mhrichter
And just have localhost.localdomain localhost here
> localhost.localdomain localhost
> 192.168.108.128 <http://192.168.108.128> mhr-wm-win
>
> > Do you have an sata controller that isn't supported with smartd?
>
>
> I don't think so - it's the on-board controller in the mobo (nVidia
> chipset), and this only started when I started having problems with the
> SG 400GB drive (that is now gone), or at least that was when I began to
> notice it. My lsmod shows sata_nv, which would be the right one.
>
> mhr
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org
> http://lists.centos.org/mailman/listinfo/centos
--
MailScanner is like deodorant...
You hope everybody uses it, and
you notice quickly if they don't!!!!
More information about the CentOS
mailing list