[CentOS] Centos 4.4 install on ASUS A8V-VM does not find SATA drives
nethub at gmail.com
nethub at gmail.com
Wed Jan 17 07:21:46 UTC 2007
We tried to get that board working for hours.
The major problem was that even after we used a cheap SATA PCI
controller to get it up and running, the onboard Ethernet port was unstable.
I'd highly recommend putting this board on eBay and getting the Asus
A8N-VM, which has the nVidia chipset that works. That's what we ended
up doing.
Don Levey wrote:
> Yes, I know someone last week asked a similar question (Problem with ASUS
> P5VD2-X X SATA II) but the only answer I saw on that thread was the
> equivalent of "I've heard it's bad so I won't do it." Unfortunately, that
> doesn't help me much.
>
> The BIOS does indeed recognise my two SATA hard drives, and I've got the
> BIOS set to "IDE" (which disables "hardware" RAID but not the SATA but
> itself). The install routine for Centos, however, does not seem to
> recognise that the drives are there (or even that the VIA bridge exists via
> auto search); if I try to manually select it I'm told it found a VIA
> VT86c100A Rhine-II PCI (via-rhine). Setting to AHCI does not seem to have
> an effect. I was hoping to use software RAID, and so didn't want to enable
> RAID on the motherboard.
>
> Does anyone have any suggestions as to how to either nudge the installation,
> or configure the hardware, to find the SATA drives so I can configure RAID?
> This is a NEW install on new drives, so it's not as if I've got an existing
> configuration I'm trying to augment.
>
> Thanks in advance,
> -Don
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org
> http://lists.centos.org/mailman/listinfo/centos
>
>
More information about the CentOS
mailing list