[CentOS] Interface bonding?
John
jses27 at gmail.com
Sat Apr 12 01:11:37 UTC 2008
On Fri, 2008-04-11 at 19:51 -0500, Les Mikesell wrote:
> John wrote:
> >
> >>> Now for what version of the 2900 you have I do not know. But it seems
> >>> the info on Ciscos site is kind of misleading in places. There is some
> >>> documentation that says it works and some say you have to have the add
> >>> on modules.
> >>>
> >>> Your best bet if your not comfortable with the IOS command line is to
> >>> use the Web Interface or the Cisco Works Manager Interface. I say this
> >>> because I have really no way of knowing your experiance on this. I
> >>> wouln't do this on a live production switch.
> >>>
> >> Trunking has to do with carrying multiple tagged vlans on one port - and
> >> the 2900xl with a 12.x IOS should do that in either ISL (cisco) or dot1q
> >> mode. But I thought we were grouping ports instead. You should be
> >> able to do both, but the interfaces in the same port group would have to
> >> have the same trunk encapsulation set. There is a separate 'vlan
> >> database' command on those switches where you have to add the vlan
> >> numbers that you want a trunk to carry - and it doesn't get saved in the
> >> visible config file. If you have 'switchport access vlan nnn' on any
> >> interface that number goes in the vlan database automatically but you
> >> just want the trunk ports to pass some other vlans through you have to
> >> add them explicitly.
> > '
> > Ok, if I am reading your reply right VLAN configs are so to say saved in
> > the switch instead of the config file correct? So a config file never
> > contains the VLAN info. Just wondering any way to copy or backup the
> > VLAN Database? There has to be shouldn't. Been 4 years or more since
> > I've touched one. Guess I need to get the newest emulator software Cisco
> > has.
>
> Actually it is more complicated that that - the switches have a vtp
> master/slave concept to learn vlans but I've always turned it off
> because the switch with the latest change becomes the master so if
> someone swaps a switch from the lab into production it would probably
> break everything in sight. As far as backing it up goes, I just keep a
> text file that goes:
> vlan database
> vlan nnn
> vlan nnn
> etc.
> exit
> to paste into a new or moved switch. But I think the new models do
> something different.
>
So he could take a preconfigured configuration of the port config and
the vlan and copy it to the VLAN Database to use it. That is the way I
always done the configuration if I had acess to a tftp server. Of course
to do that now for as command wise I've no clue for the vlan database/
--
~/john
OpenPGP Sig:BA91F079
More information about the CentOS
mailing list