[CentOS] Hot swapping sata drives
Timothy Selivanow
timothy.selivanow at virtualxistenz.com
Wed Jan 23 22:02:07 UTC 2008
On Wed, 2008-01-23 at 14:14 -0600, Les Mikesell wrote:
> Jerry Geis wrote:
> > I have a two external USB drives only 1 is connected to centos 5.1 at a
> > time.
> > the USB drive is SLOW compared to SATA.
> > The external drive suppots both connections USB and SATA.
> >
> > I bought a little $5 external SATA connector that goes into the
> > PCI slot area (does not actually take a PCI slot just the backpanel)
> > and just plugs back into one of the available SATA
> > ports on the motherboard.
> >
> > When I turn off the external drive and put the other drive on
> > the connection and then power on will SATA handle that automatically?
> > Is there a command I need to run to tell it check for new disks?
> >
> > Is this possible?
> > Will I have to reboot to get the swapped external disk detected.
>
> This depends on the controller - some don't provide hotplug support.
> There is some info here http://linuxmafia.com/faq/Hardware/sata.html.
Here's probably the same info and more, in a easier to read format
(feature matrix). Plus has added bonus of coming from the proverbial
horse's mouth :)
http://linux-ata.org/driver-status.html#matrix
--Tim
___________________________________________________________________
/ Isn't it strange that the same people that laugh at gypsy fortune \
\ tellers take economists seriously? /
-------------------------------------------------------------------
\
\ \
\ /\
( )
.( o ).
More information about the CentOS
mailing list