[CentOS] Centos 5.3 install on gigabyte GA-MA790FX-UD5P motherboard

[Nobody ist perfect]

Hi
with the kernel parameters  ...
nousb nousbstorage nomsi nodm nodmraid noapic acpi=off pci=nomsi

worked for me ...


Nathan Norton schrieb:
> Hi,
> 
> I am having some difficulties installing centos 5.3 on the gigabyte GA-MA790FX-UD5P motherboard.
> 
> Has anyone got centos booting on this motherboard?
> 
> so far I have tried the following.
> 
> + disabled the jmicron controller  as this caused errors on booting 
>     JMB363 bad irq(0): will probe later error (this error caused the installation to stop at this point)
> 
> + tested all components in another computer, they all work.
> 
> + remove all unnecessary components from the pci bus. 
> 
> + power supply is not an issue since I have used a 850W PSU
> 
> Basically what I am seeing is once the installation process starts and asks do i have another sata disk, and I select no the screen freezes at this point *every* single time, the screen is always blue with a couple of greek looking characters on the screen. No logs are left at this point in the installation, so it is making it difficult to diagnose.
> 
> Today I installed the grml  distribution and it worked with no issues, it uses a base kernel of 2.6.28. so there is nothing wrong with the hardware but centos still does not want to install on this motherboard. 
> 
> Anyone have any ideas?
> 
> Nathan