[CentOS] Centos 5.5, not booting latest kernel but older one instead

[Robert Heller]

At Mon, 30 Aug 2010 22:24:19 -0400 CentOS mailing list <centos at centos.org> wrote:

> 
> On Mon, Aug 30, 2010 at 08:41:31PM -0500, Larry Vaden wrote:
> > On Mon, Aug 30, 2010 at 8:18 PM, fred smith
> > <fredex at fcshome.stoneham.ma.us> wrote:
> > >
> > > Below is some info that shows the problem. Can anyone here provide
> > > helpful suggestions on (1) why it is doing this, and more importantly (2)
> > > how I can make it stop?
> > 
> > Is there a chance /boot is full (read: are all the menu'd kernels
> > actually present in /boot)?
> > 
> > (IIRC something similar happened because the /boot partition was set
> > at the recommended size of 100 MB).
> 
> /boot doesn't appear to be full, there appear to be 25.2 megabytes free with 20.1 available.
> 
> another curious thing I just noticed is this: the list of kernels available 
> at boot time (in the actual grub menu shown at boot) IS NOT THE SAME LIST
> THAT APPEARS IN GRUB.CONF. in the boot-time menu, the kernel it boots is
> the most recent one shown, and there are other older ones that do not
> appear in grub.conf. while in grub.conf there are several newer ones that
> do not appear on the boot-time grub menu.
> 
> most strange.
> 
> BTW, this is a raid-1 array using linux software raid, with two matching
> drives. Is there possibly some way the two drives could have gotten out
> of sync such that whichever one is the actual boot device has invalid
> info in /boot?
> 
> and while thinking along those lines, I see a number of mails in root's
> mailbox from "md" notifying us of a degraded array. these all appear to have
> happened, AFAICT, at system boot, over the last several months.
> 
> also, /var/log/messages contains a bunch of stuff like the below, also 
> apparently at system boot, and I don't really know what it means, though
> the lines mentining a device being "kicked out" seem ominous:
> 
> Aug 30 22:09:08 fcshome kernel: device-mapper: uevent: version 1.0.3
> Aug 30 22:09:08 fcshome kernel: device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) 
> initialised: dm-devel at redhat.com
> Aug 30 22:09:08 fcshome kernel: device-mapper: dm-raid45: initialized v0.2594l
> Aug 30 22:09:08 fcshome kernel: md: Autodetecting RAID arrays.
> Aug 30 22:09:08 fcshome kernel: md: autorun ...
> Aug 30 22:09:08 fcshome kernel: md: considering sdb2 ...
> Aug 30 22:09:08 fcshome kernel: md:  adding sdb2 ...
> Aug 30 22:09:08 fcshome kernel: md: sdb1 has different UUID to sdb2
> Aug 30 22:09:08 fcshome kernel: md:  adding sda2 ...
> Aug 30 22:09:08 fcshome kernel: md: sda1 has different UUID to sdb2
> Aug 30 22:09:08 fcshome kernel: md: created md1
> Aug 30 22:09:08 fcshome kernel: md: bind<sda2>
> Aug 30 22:09:08 fcshome kernel: md: bind<sdb2>
> Aug 30 22:09:08 fcshome kernel: md: running: <sdb2><sda2>
> Aug 30 22:09:08 fcshome kernel: md: kicking non-fresh sda2 from array!
> Aug 30 22:09:08 fcshome kernel: md: unbind<sda2>
> Aug 30 22:09:08 fcshome kernel: md: export_rdev(sda2)
> Aug 30 22:09:08 fcshome kernel: raid1: raid set md1 active with 1 out of 2 mirro
> rs
> Aug 30 22:09:08 fcshome kernel: md: considering sdb1 ...
> Aug 30 22:09:08 fcshome kernel: md:  adding sdb1 ...
> Aug 30 22:09:08 fcshome kernel: md:  adding sda1 ...
> Aug 30 22:09:08 fcshome kernel: md: created md0
> Aug 30 22:09:08 fcshome kernel: md: bind<sda1>
> Aug 30 22:09:08 fcshome kernel: md: bind<sdb1>
> Aug 30 22:09:08 fcshome kernel: md: running: <sdb1><sda1>
> Aug 30 22:09:08 fcshome kernel: md: kicking non-fresh sda1 from array!
> Aug 30 22:09:08 fcshome kernel: md: unbind<sda1>
> Aug 30 22:09:08 fcshome kernel: md: export_rdev(sda1)
> Aug 30 22:09:08 fcshome kernel: raid1: raid set md0 active with 1 out of 2 mirro
> rs
> Aug 30 22:09:08 fcshome kernel: md: ... autorun DONE.

It looks like there is something wrong with sda... Your BIOS is booting
grub from sda, grub is loading its conf, etc. from sda, but sda is not
part of your raid sets of your running system.  Your newer kernels are
landing on sdb...

I *think* you can fix this by using mdadm to add (mdadm --add ...)  sda
and make it rebuild sda1 and sda2 from sdb1 and sdb2. You mav have to
--fail and --remove it first.


> 
> > 
> > Kind regards/ldv
> > _______________________________________________
> > CentOS mailing list
> > CentOS at centos.org
> > http://lists.centos.org/mailman/listinfo/centos
> 

-- 
Robert Heller             -- Get the Deepwoods Software FireFox Toolbar!
Deepwoods Software        -- Linux Installation and Administration
http://www.deepsoft.com/  -- Web Hosting, with CGI and Database
heller at deepsoft.com       -- Contract Programming: C/C++, Tcl/Tk