[CentOS] centos 5.5 x64 bit issues on sun blade X6270 SERVER MODULE

sylvan.dcunha at gmail.com

sylvan.dcunha at gmail.com
Thu Dec 16 18:24:34 UTC 2010


Dear All,

I have managed perfectly fine to install centos 5.5 x64 on a new sun blade  
x6270 server module .i had to install in text mode since GUI install mode  
was not working

Actually this machine is going to replace my current working very low  
hardware server
the server is used as my primary dns, mail server , webmail server also  
running Mailscanner, mailwatch etc.
Also I want to use this new sun blade server as a virtual machine using xen

i have installed xen and uts fine

but i have a issue with the diplay driver

I did run system-config-network and selected the card as ast-ASpeedTech  
chipsets since my lspci says i have a
20:05.0 VGA compatible controller: ASPEED Technology, Inc. ASPEED Graphics  
Family (rev 10)

now I run startx and i get the below error
X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: Linux 2.6.18-53.el5 x86_64 Red Hat, Inc.
Current Operating System: Linux kmundns 2.6.18-194.26.1.el5xen #1 SMP Tue  
Nov 9 13:35:30 EST 2010 x86_64
Build Date: 17 November 2010
Build ID: xorg-x11-server 1.1.1-48.76.el5_5.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 16 21:17:19 2010
(==) Using config file: "/etc/X11/xorg.conf"
dlopen: /usr/lib64/xorg/modules/drivers/ast_drv.so: wrong ELF class:  
ELFCLASS32
(EE) Failed to load /usr/lib64/xorg/modules/drivers/ast_drv.so
(EE) Failed to load module "ast" (loader failed, 7)
(EE) No drivers available.

Fatal server error:
no screens found
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.
---------------------------------------------------------

then i did change the driver to vesa and running startx shows me as below

xauth: creating new authority file /root/.serverauth.16448


X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: Linux 2.6.18-53.el5 x86_64 Red Hat, Inc.
Current Operating System: Linux kmundns 2.6.18-194.26.1.el5xen #1 SMP Tue  
Nov 9 13:35:30 EST 2010 x86_64
Build Date: 17 November 2010
Build ID: xorg-x11-server 1.1.1-48.76.el5_5.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 16 21:10:35 2010
(==) Using config file: "/etc/X11/xorg.conf"
(EE) VESA(0): No valid modes
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.
------------------------------------------------------------

i really apprecite if someone out there would help me and advise


Thanks and Regards

simon

I really need the graphic to setup virtual machine since in GUI is quite  
simple
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.centos.org/pipermail/centos/attachments/20101216/99f829a1/attachment.html>


More information about the CentOS mailing list