[CentOS] Forgetting network settings

[cahit Eyigünlü]

This is my two line on route-eth0
 address0=217.20.117.1
 subnet0=255.255.255.255
but what should be next line for default gateway the only thing that i could
not complete is default gateway setting
and my netstat table must looklike this :
Destination     Gateway         Genmask         Flags   MSS Window  irtt
Iface
217.20.117.1    0.0.0.0         255.255.255.255 UH        0 0          0
eth0
xx.xx.xx.0     0.0.0.0         255.255.255.0   U         0 0          0 eth0
0.0.0.0         217.20.117.1    0.0.0.0         UG        0 0          0
eth0
and now i see only the first two line truely i am adding 3rd line on every
time restart manually with route add default gw


2010/3/29 Les Mikesell <lesmikesell at gmail.com>

> cahit Eyigünlü wrote:
> > i am reaching the network with this :
> > route add -net 217.20.117.1 netmask 255.255.255.255 dev eth0
> > route add default gw 217.20.117.1
> >
> > i have added eth0
> > address0=217.20.117.1
> > subnet0=255.255.255.255
> >
> > the first command is ok but how could i set the second command to cent
> > os to do it automatically
> >
>
> If you create a file named /etc/sysconfig/network-scripts/route-eth0 you
> can put
> lines in it that will have 'ip route' added at the beginning and executed
> after
> the interface is up.  "ip route" takes some different arguments than the
> "route"
> command - see "man ip" for details.
>
> --
>   Les Mikesell
>   lesmikesell at gmail.com
>
>
>
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org
> http://lists.centos.org/mailman/listinfo/centos
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.centos.org/pipermail/centos/attachments/20100329/7b8467fc/attachment.html>