[CentOS] Forgetting network settings

[cahit Eyigünlü]

there is no problem with my internet connection i just want that to do this
cent os automatically :
route add default gw 217.20.117.1
before typing this my netstat -rn looks like this :
root at lin3 [~]# netstat -rn (that is not able to connect to internet)
Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window  irtt
Iface
217.20.117.1    0.0.0.0         255.255.255.255 UH        0 0          0
eth0
188.72.255.0    0.0.0.0         255.255.255.0   U         0 0          0
eth0
169.254.0.0     0.0.0.0         255.255.0.0     U         0 0          0
eth0
after adding gateway : (this works perfect)
root at lin3 [~]# netstat -rn
Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window  irtt
Iface
217.20.117.1    0.0.0.0         255.255.255.255 UH        0 0          0
eth0
188.72.255.0    0.0.0.0         255.255.255.0   U         0 0          0
eth0
169.254.0.0     0.0.0.0         255.255.0.0     U         0 0          0
eth0
*0.0.0.0         217.20.117.1    0.0.0.0         UG        0 0          0
eth0 *

i just want to add bold line automatically

and this is my ifconfig :
root at lin3 [~]# ifconfig -a
eth0      Link encap:Ethernet  HWaddr 00:0C:29:83:21:44
          inet addr:188.72.255.189  Bcast:188.72.255.255  Mask:255.255.255.0
          inet6 addr: fe80::20c:29ff:fe83:2144/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:9653 errors:0 dropped:0 overruns:0 frame:0
          TX packets:458 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:876648 (856.1 KiB)  TX bytes:50814 (49.6 KiB)
          Base address:0x2000 Memory:d8920000-d8940000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:483 errors:0 dropped:0 overruns:0 frame:0
          TX packets:483 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:75305 (73.5 KiB)  TX bytes:75305 (73.5 KiB)

sit0      Link encap:IPv6-in-IPv4
          NOARP  MTU:1480  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)



2010/3/29 Matt Iavarone <matt.iavarone at gmail.com>

> 2010/3/29 cahit Eyigünlü <cahit.eyigunlu at gmail.com>:
> > This is my two line on route-eth0
> >  address0=217.20.117.1
> >  subnet0=255.255.255.255
> > but what should be next line for default gateway the only thing that i
> could
> > not complete is default gateway setting
> > and my netstat table must looklike this :
> > Destination     Gateway         Genmask         Flags   MSS Window  irtt
> > Iface
> > 217.20.117.1    0.0.0.0         255.255.255.255 UH        0 0          0
> > eth0
> > xx.xx.xx.0     0.0.0.0         255.255.255.0   U         0 0          0
> eth0
> > 0.0.0.0         217.20.117.1    0.0.0.0         UG        0 0          0
> > eth0
> > and now i see only the first two line truely i am adding 3rd line on
> every
> > time restart manually with route add default gw
> >
> > 2010/3/29 Les Mikesell <lesmikesell at gmail.com>
> >>
> >> cahit Eyigünlü wrote:
> >> > i am reaching the network with this :
> >> > route add -net 217.20.117.1 netmask 255.255.255.255 dev eth0
> >> > route add default gw 217.20.117.1
> >> >
> >> > i have added eth0
> >> > address0=217.20.117.1
> >> > subnet0=255.255.255.255
> >> >
> >> > the first command is ok but how could i set the second command to cent
> >> > os to do it automatically
> >> >
> >>
> >> If you create a file named /etc/sysconfig/network-scripts/route-eth0 you
> >> can put
> >> lines in it that will have 'ip route' added at the beginning and
> executed
> >> after
> >> the interface is up.  "ip route" takes some different arguments than the
> >> "route"
> >> command - see "man ip" for details.
> >>
> >> --
> >>   Les Mikesell
> >>   lesmikesell at gmail.com
> >>
> >>
> >>
> >> _______________________________________________
> >> CentOS mailing list
> >> CentOS at centos.org
> >> http://lists.centos.org/mailman/listinfo/centos
> >
> >
> > _______________________________________________
> > CentOS mailing list
> > CentOS at centos.org
> > http://lists.centos.org/mailman/listinfo/centos
> >
> >
>
> Why don't you post the results of 'ifconfig -a' and 'ip route show'?
> Giving information piecemeal is not helping anyone.
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org
> http://lists.centos.org/mailman/listinfo/centos
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.centos.org/pipermail/centos/attachments/20100329/296c00f5/attachment.html>