[CentOS] route question
Jerry Geis
geisj at pagestation.com
Fri May 14 19:02:04 UTC 2010
>
> GATEWAY=74.223.8.177 on /etc/sysconfig/network file ?
>
Actually I have that in the ifcfg-eth1 and ifcfg-eth2. And this is hte
route I get.
DEVICE=eth1
ONBOOT=YES
BOOTPROTO=static
IPADDR=74.223.8.179
NETMASK=255.255.255.240
GATEWAY=74.223.8.177
DEVICE=eth2
ONBOOT=Yes
BOOTPROTO=static
IPADDR=24.123.23.170
NETMASK=255.255.255.248
GATEWAY=24.123.23.169
route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
24.123.23.168 0.0.0.0 255.255.255.248 U 0 0 0 eth2
74.223.8.176 0.0.0.0 255.255.255.240 U 0 0 0 eth1
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth2
0.0.0.0 24.123.23.169 0.0.0.0 UG 0 0 0 eth2
I dont want 74.X traffic going out 24.X network. I want it going back
out the 74.X network.
How do I setup the ifcfg-eth files so the GW above will route back out
the correct gw?
Jerry
More information about the CentOS
mailing list