[CentOS] Grub Error 22; no Windows

Fri May 21 02:49:04 UTC 2010
Jeff Sadino <jsadino.queens at gmail.com>

nvm, I figured it out after my whole day :)
The BIOS was automatically updated and moved the OS drive down from the 1st
boot drive to the last boot drive.  sheesh, so simple!
Thanks anyways!

On Thu, May 20, 2010 at 2:15 PM, Jeff Sadino <jsadino.queens at gmail.com>wrote:

> Hello,
>
> I have a GridEngine setup with 5 subnodes and two RAIDS attached.  I backed
> up the OS drive - 120GB - to an external hard drive - 500GB - using
> ddrescue.  The OS drive is partitioned as:
> sda1 has the OS and is about 7 GB
> sda2 has /var and is about 4 GB
> sda3 has swap and is about 1 GB
>
> After backing up, there were 4KB of errors, but all at the end of the disk
> around 118GB.  This used to be a partition back in the day, but I deleted it
> accidentally.  I want to back up to this new larger disk b/c the original
> 120GB disk is discontinued.  I boot from a live cd - SystemRescue CD - and
> run e2fsck -c -c -C 0 y on sda1 and sda2 on the backup drive, and it seems
> to finish fine.  Then I replaced the OS drive with the backup drive, and it
> goes to boot, then Grub Loading Stage 1.5; Error 22.
>
> Here's the important stuff from fstab:
> # This file is edited by fstab-sync - see 'man fstab-sync' for details
> LABEL=/1                /                       ext3    defaults        1 1
> none                    /dev/pts                devpts  gid=5,mode=620  0 0
> none                    /dev/shm                tmpfs   defaults        0 0
> /dev/md0                /export                 ext3    defaults        0 0
>
> none                    /proc                   proc    defaults        0 0
> none                    /sys                    sysfs   defaults        0 0
> LABEL=/var              /var                    ext3    defaults        1 2
> LABEL=SWAP-sda3         swap                    swap    defaults        0 0
> /dev/sdb1        swap            swap    defaults    0 0
> # The ram-backed filesystem for ganglia RRD graph databases.
> tmpfs /var/lib/ganglia/rrds tmpfs
> size=252709000,gid=nobody,uid=nobody,defaults 1 0
> /dev/hda                /media/cdrom            auto
> pamconsole,exec,noauto,managed 0 0
>
> I boot up from the live cd, and then tell it to search for bootloaders on
> the drives, and it finds one, and it goes through, and then throws errors
> b/c it is mounting the OS /sda1 drive and then trying to run fsck on it.  I
> tried setting the error-check values to 0 for /1 and /var, but it is still
> trying to error check it.
>
> My blkid says that sda1, sda2, and sda3 all have different UUIDs.  sdc1,
> sdd1, and md0 all have the same UUID.  md0 is a RAID1 comprised of sdc1 and
> sdd1.  sdc and sdd are identical drives.
>
> This used to happen, and I would just restart a couple of times, and it
> would sneak on past the error eventually, but to no avail this time.  Does
> anyone have any ideas?  Thank you so much!
>
> And thank you to the dozen people who offered advice on the best backup
> option.  After reading all of the replies and the links, I think I will prob
> go with the rsync-backup suggestion.
>
> Mahalo,
> Jeff
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.centos.org/pipermail/centos/attachments/20100520/5e077191/attachment-0005.html>