[CentOS] Attaching LinkSys WRT54GL to CentOS machine
Robert Heller
heller at deepsoft.com
Mon Apr 25 21:30:23 UTC 2011
At Mon, 25 Apr 2011 13:20:58 -0700 CentOS mailing list <centos at centos.org> wrote:
>
> On 04/25/11 12:28 PM, Florin Andrei wrote:
> > The WiFi access point is connected to the server via a loopback Ethernet
> > cable actually. There's no need to use a switch when there are only 2
> > devices connected. Also, in this setup, there's no point to use a WiFi
> > router - a simple WiFi access point is much better.
>
> the catch is, routers are both cheaper and easier to find.
>
>
> you can use a typical router as a access point if you...
>
> * disable DHCP server on the router
> * set the WAN (internet) address to something static and 'safe' like
> 10.255.255.254 mask 255.255.255.0
You don't really need to do anything with the WAN port, so long as it is
unconnected.
> * set the LAN (local) IP address to a unused static IP on your
> subnet so you can access it for management
> * use only the LAN ports on the router (it can be used as a 4-port
> switch)
>
>
> if the router is compatible with Tomato or DD-Wrt firmware, there's a
> setting that does the equivalent of this, AND lets you use the WAN port
> as another switch port.
>
>
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org
> http://lists.centos.org/mailman/listinfo/centos
>
>
--
Robert Heller -- 978-544-6933 / heller at deepsoft.com
Deepwoods Software -- http://www.deepsoft.com/
() ascii ribbon campaign -- against html e-mail
/\ www.asciiribbon.org -- against proprietary attachments
More information about the CentOS
mailing list