[CentOS] Server hangs on CentOS 5.5

Thu Mar 10 16:37:51 UTC 2011
Brunner, Brian T. <BBrunner at gai-tronics.com>

centos-bounces at centos.org wrote:
> Simon Matter wrote:
> 
> The MB docs/website don't mention ECC support, but I presume
> it is as part of the DDR2 spec.  
> I'll check whether the memory has ECC.  If not, this is a reasonable
upgrade.

Your board does not support DDR2.
See
http://service.msicomputer.com/index.php?func=proddesc&maincat_no=1&cat2
_no=&cat3_no=&prod_no=273
"Support 2.5v DDR200/266/333 DDR SDRAM DIMM "

That's straight old DDR.  3 slots of up to 3GB.  No ECC.

BIOS listed is A6380VMS.570

So many "instrumentation" suggestions have been made, that I think to
note:  The CPU bandwidth is rather modest, and might not support all
that instrumentation *and* its previous job load.  Also, some
instrumentation packages suggested might not support socket A
(pre-Barton) motherboards, verify
VIA(r) KT333 (552 BGA) Chipset
and
VIA(r) VT8233A (376 BGA) Chipset
are "comprehended"


Insert spiffy .sig here:
Life is complex: it has both real and imaginary parts.

//me
*******************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom
they are addressed. If you have received this email in error please
notify the system manager. This footnote also confirms that this
email message has been swept for the presence of computer viruses.
www.Hubbell.com - Hubbell Incorporated**