[CentOS] ACPI errors during bootup

Robert Heller heller at deepsoft.com
Wed Mar 23 17:18:09 UTC 2011


At Wed, 23 Mar 2011 19:34:10 +0530 CentOS mailing list <centos at centos.org> wrote:

> 
> 
> 
> Hi,
> 
> Am trying to build SMP kernel.

You do know that the *stock* CentOS 5.x kernels (2.6.18-...) are already
built as SMP kernels?  That is, under RHEL 5/CentOS 5 you don't even get
uniprocessor kernels, unless you build them yourself (and there isn't
much need to bother).

> Took kernel-2.6.18-194.src.rpm, extracted, rpmbuilded with SMP option.
> Successfully compile the new kernel and when using that kernel to boot up,
> following errors were shown up(highlighted in bold & red color):
> My kernel config file has ACPI and PCI configs enabled.
> 
> Any pointers to what caused the problem are appreciated.
> 
> 
> ******************************
> *********************************************************************************
>  BIOS-e820: 0000000000010000 - 000000000009e000 (usable)
>  BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
>  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
>  BIOS-e820: 0000000000100000 - 000000001fee9000 (usable)
>  BIOS-e820: 000000001fee9000 - 0000000020000000 (reserved)
>  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> 0MB HIGHMEM available.
> 510MB LOWMEM available.
> Memory for crash kernel (0x0 to 0x0) notwithin permissible range
> disabling kdump
> Using x86 segment limits to approximate NX protection
> DMI not present or invalid.
> Using APIC driver default
> ACPI: Unable to locate RSDP
> Allocating PCI resources starting at 30000000 (gap: 20000000:dff00000)
> Detected 1000.103 MHz processor.
> Built 1 zonelists.  Total pages: 130793
> Kernel command line: root=/dev/ram ramdisk_size=200000
> ramdisk_start=0x6000000 c
> onsole=ttyS0,9600n8 plat=bryce reboot=warm n
> Local APIC disabled by BIOS -- you can enable it with "lapic"
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Initializing CPU#0
> CPU 0 irqstacks, hard=c076f000 soft=c074f000
> PID hash table entries: 2048 (order: 11, 8192 bytes)
> Console: colour dummy device 80x25
> Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
> Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
> Memory: 503320k/523172k available (2189k kernel code, 19224k reserved, 920k
> data
> , 232k init, 0k highmem)
> Checking if this processor honours the WP bit even in supervisor mode... Ok.
> Calibrating delay loop (skipped), value calculated using timer frequency..
> 2000.
> 20 BogoMIPS (lpj=1000103)
> Security Framework v1.0.0 initialized
> SELinux:  Initializing.
> selinux_register_security:  Registering secondary module capability
> Capability LSM initialized as secondary
> Mount-cache hash table entries: 512
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 512K
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> Checking 'hlt' instruction... OK.
> SMP alternatives: switching to UP code
> Freeing SMP alternatives: 14k freed
> CPU0: Intel(R) Celeron(R) M processor         1.00GHz stepping 08
> SMP motherboard not detected.
> Local APIC not detected. Using dummy APIC emulation.
> Brought up 1 CPUs
> *checking if image is initramfs... it is
> Freeing initrd memory: 10554k freed
> NET: Registered protocol family 16
> PCI: PCI BIOS revision 2.10 entry at 0xff67f, last bus=4
> PCI: Using configuration type 1
> Setting up standard PCI resources
> ACPI: Interpreter disabled.
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI: disabled
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> PCI: Probing PCI hardware
> ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707]
> ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found -
> Flags=8
>  [20060707]
> ACPI: System description tables not found
> ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707]
> ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found -
> Flags=8
>  [20060707]
> ACPI: System description tables not found
> ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707]
> ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found -
> Flags=8
>  [20060707]
> ACPI: System description tables not found
> ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707]
> ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found -
> Flags=8
>  [20060707]
> ACPI: System description tables not found
> ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707]
> ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found -
> Flags=8
>  [20060707]
> ACPI: System description tables not found
> ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707]
> ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found -
> Flags=8
>  [20060707]
> ACPI: System description tables not found
> ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707]
> ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found -
> Flags=8
>  [20060707]
> ACPI: System description tables not found
> ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707]
> ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found -
> Flags=8
>  [20060707]
> ACPI: System description tables not found
> ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707]
> ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found -
> Flags=8
>  [20060707]
> ACPI: System description tables not found
> ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707]
> ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found -
> Flags=8
>  [20060707]
> ACPI: System description tables not found
> ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707]
> ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found -
> Flags=8
>  [20060707]
> ACPI: System description tables not found
> ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707]
> ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found -
> Flags=8
>  [20060707]
> ACPI: System description tables not found
> PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
> PCI quirk: region 0500-053f claimed by ICH4 GPIO
> ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707]
> ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found -
> Flags=8
>  [20060707]
> ACPI: System description tables not found
> PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
> ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707]
> ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found -
> Flags=8
>  [20060707]
> ACPI: System description tables not found
> ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707]
> ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found -
> Flags=8
>  [20060707]
> ACPI: System description tables not found
> ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707]
> ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found -
> Flags=8
>  [20060707]
> ACPI: System description tables not found
> ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707]
> ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found -
> Flags=8
>  [20060707]
> ACPI: System description tables not found*
> PCI: Transparent bridge - 0000:00:1e.0
> NetLabel: Initializing
> NetLabel:  domain hash size = 128
> NetLabel:  protocols = UNLABELED CIPSOv4
> NetLabel:  unlabeled traffic allowed by default
> PCI: Bridge: 0000:00:02.0
>   IO window: c000-0000
>   MEM window: c0100000-00000000
>   PREFETCH window: disabled.
> PCI: Bridge: 0000:00:03.0
>   IO window: disabled.
>   MEM window: disabled.
>   PREFETCH window: disabled.
> PCI: Bridge: 0000:00:1c.0
>   IO window: disabled.
>   MEM window: disabled.
>   PREFETCH window: disabled.
> PCI: Bridge: 0000:00:1e.0
>   IO window: disabled.
>   MEM window: disabled.
>   PREFETCH window: disabled.
> PCI: No IRQ known for interrupt pin A of device 0000:00:02.0. Please try
> using p
> ci=biosirq.
> PCI: No IRQ known for interrupt pin A of device 0000:00:03.0. Please try
> using p
> ci=biosirq.
> NET: Registered protocol family 2
> IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
> TCP established hash table entries: 16384 (order: 5, 131072 bytes)
> TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
> TCP: Hash tables configured (established 16384 bind 8192)
> TCP reno registered
> apm: BIOS not found.
> audit: initializing netlink socket (disabled)
> type=2000 audit(1300527457.278:1): initialized
> Total HugeTLB memory allocated, 0
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> Initializing Cryptographic API
> alg: No test for crc32c (crc32c-generic)
> ksign: Installing public key data
> Loading keyring
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> pcieport-driver 0000:00:02.0: device [8086:3595] has invalid IRQ; check
> vendor B
> IOS
> pcieport-driver 0000:00:03.0: device [8086:3596] has invalid IRQ; check
> vendor B
> IOS
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> **************************************************************************************************************************

-- 
Robert Heller             -- 978-544-6933 / heller at deepsoft.com
Deepwoods Software        -- http://www.deepsoft.com/
()  ascii ribbon campaign -- against html e-mail
/\  www.asciiribbon.org   -- against proprietary attachments


                                                                                                  



More information about the CentOS mailing list