[CentOS] Loading drivers during "linux rescue"
Jobst Schmalenbach
jobst at barrett.com.au
Thu Aug 23 12:08:19 UTC 2012
Sorry, maybe I did not give enough information.
I have the drivers from adaptecs site (plus the kmod stuff).
At least once I need to boot the rescue disk to select the
bootpartition and install grub on the new drives, I need to insmod
the drivers, but I do not know where and how to do that during
the boot process of the rescue disk (there is no menu for that).
I have never had to do this before ... in all the years of using Linux ;-)
Jobst
On Thu, Aug 23, 2012 at 02:31:55AM -0700, John Doe (jdmls at yahoo.com) wrote:
> From: Jobst Schmalenbach <jobst at barrett.com.au>
>
> > I got a new Adaptec 6405 card with a set of new harddrives.
> > Problem that I assumed that the card had kernel drivers, which it has but only
> > from 2.6.39 onwards.
> >
> > I installed the kmod-aacraid drivers, they see the card and drives, fine.
> >
> > However, I need to get a "linux rescue" to work, thus I need to load
> > the drivers during the boot of the resuce disk.
> > How do I do this?
>
> Tried adaptec's driver disk?
> http://www.adaptec.com/en-us/speed/raid/aac/linux/aacraid_linux_driverdisks_v1_1_7-29100_tgz.htm
>
> JD
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org
> http://lists.centos.org/mailman/listinfo/centos
--
while ( !sorted ) { do_nothing ( ) ; }
| |0| | Jobst Schmalenbach, jobst at barrett.com.au, General Manager
| | |0| Barrett Consulting Group P/L & The Meditation Room P/L
|0|0|0| +61 3 9532 7677, POBox 277, Caulfield South, 3162, Australia
More information about the CentOS
mailing list