[CentOS] motherboard for cents 6.3
b.j. mcclure
keepertoad at bellsouth.net
Thu Feb 14 17:03:10 UTC 2013
Have built two workstations in last few months using Gigabyte
GA-880GA-UD3H motherboards. One Rev. 2101, the other Rev. 3001. Both
DVD installs of 6.3 w/o a hitch. Using software Raid 10 on both with
four sata III drives. Zero issues known.
HTH.
B.J.
CentOS release 6.3 (Final)
On Thu, 2013-02-14 at 10:28 -0500, Jerry Geis wrote:
> Seems like overnight every motherboard that worked with linux has
> DROPPED off
> the face of the earth.
>
> Every motherboard I looked at is using the realtek 8111 chipset and a
> northbridge
> that is not supported.
>
> Example: GIGABYTE GA-970A-DS3, does not work with linux
> I tried disabling the onboard NIC and using a PCI-E intel card I always use
> and that would not work either. The north or south bridge is messing
> with the network card.
> The card asks for a PXE boot but after centos starts it can no longer
> find kickstart files, network
> is messed up.
>
> I was using Asus M5A88-M and they are no longer available.
>
> Anyway - anyone have a suggestion for and AMD motherboard that works with
> linux be great if it has onboard video (gaming is not needed), onboard
> network,
> SATA nothing super special just "working".
>
> Thanks,
>
> jerry
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org
> http://lists.centos.org/mailman/listinfo/centos
More information about the CentOS
mailing list