[CentOS] Lockups with kernel-2.6.32-358.0.1.el6.i686
SilverTip257
silvertip257 at gmail.com
Fri Mar 8 17:33:07 UTC 2013
On Fri, Mar 8, 2013 at 11:27 AM, Kwan Lowe <kwan.lowe at gmail.com> wrote:
> On Fri, Mar 8, 2013 at 10:51 AM, Gerry Reno <greno at verizon.net> wrote:
> >
> > Nearly every time we've had lockup problems it has come down to bad or
> failing memory.
> >
> > I've even had memory cause problems where it would pass a quick memtest
> but ultimately would fail if you left it running
> > the tests overnight.
>
> Thank you for your reply.
>
> I was leaning towards memory after swapping the power supply did not
>
Sure sounds like a memory related lock up since you've ruled out the power
supply.
> solve the problem. There are 4 8GB DDR3 sticks, so I took out two and
> ran with 16G. It still failed. I then swapped that out for the other
> 16GB. Still failed. What I haven't tried is to downclock the memory to
>
Are you able to boot the system with memory in the second pair of slots?
If it's not memory related (test this memory in another system) then it is
probably a motherboard failure. I've seen weird symptoms where the system
will boot fine, but once the Linux kernel begins to build its cache it
triggers a lock up/throws an exception.
In that case the memory controller was probably going so that ancient
system got thrown out (was not in production). In that case the system
previously had a proprietary Linux 2.2 kernel and a 2.4 or 2.6 kernel would
cause it to wig out. Differences in how a 2.2 and 2.4/2.6 kernel allocates
memory really brought out the problem in that system!
But to be sure, run a memtest overnight on the original 4x8GB RAM as has
been recommended by others.
> a slower speed but will try that tonight if the BIOS supports it.
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org
> http://lists.centos.org/mailman/listinfo/centos
>
--
---~~.~~---
Mike
// SilverTip257 //
More information about the CentOS
mailing list