[CentOS] mount exited with exit code 18(SOLVED)
Mark LaPierre
marklapier at aol.com
Mon Mar 18 00:56:46 UTC 2013
On 03/17/2013 04:17 PM, Clint Dilks wrote:
> Hi
>
> Try looking here
>
> http://wiki.centos.org/TipsAndTricks/NTFS
>
>
> On Mon, Mar 18, 2013 at 9:13 AM, Mark LaPierre <marklapier at aol.com> wrote:
>
>> Hey Y'all,
>>
>> I'm trying to mount a USB drive with an NTFS file system on it. I need
>> the drive in a win-7 virtual box instance.
>>
>> Error Dialog is:
>>
>> Error mounting: mount exited with exit code 18: Error opening
>> '/dev/sdc1': Read-only file system
>> Failed to mount '/dev/sdc1': Read only file system
>>
>> [root at mushroom /]# ls -l /dev/disk/by-id | grep usb
>> lrwxrwxrwx. 1 root root 9 Mar 17 14:49
>> usb-TOSHIBA_TOSHIBA_USB_DRV_07082714D41C2837-0:0 -> ../../sdc
>> lrwxrwxrwx. 1 root root 10 Mar 17 14:49
>> usb-TOSHIBA_TOSHIBA_USB_DRV_07082714D41C2837-0:0-part1 -> ../../sdc1
>>
>> [root at mushroom /]# ls -l /dev/disk/by-label/ | grep sdc
>> lrwxrwxrwx. 1 root root 10 Mar 17 14:49 FDSADV -> ../../sdc1
>>
>> [root at mushroom /]# ls -l /dev/disk/by-path/ | grep sdc
>> lrwxrwxrwx. 1 root root 9 Mar 17 14:49
>> pci-0000:00:10.4-usb-0:7:1.0-scsi-0:0:0:0 -> ../../sdc
>> lrwxrwxrwx. 1 root root 10 Mar 17 14:49
>> pci-0000:00:10.4-usb-0:7:1.0-scsi-0:0:0:0-part1 -> ../../sdc1
>>
>> [root at mushroom /]# ls -l /dev/disk/by-uuid/ | grep sdc
>> lrwxrwxrwx. 1 root root 10 Mar 17 14:49 6CA0387BA0384E38 -> ../../sdc1
>>
>> [root at mushroom /]# fdisk -l /dev/sdc
>>
>> Disk /dev/sdc: 32.0 GB, 32027705344 bytes
>> 64 heads, 32 sectors/track, 30544 cylinders
>> Units = cylinders of 2048 * 512 = 1048576 bytes
>> Sector size (logical/physical): 512 bytes / 512 bytes
>> I/O size (minimum/optimal): 512 bytes / 512 bytes
>> Disk identifier: 0x05b6fb64
>>
>> Device Boot Start End Blocks Id System
>> /dev/sdc1 1 30544 31277040 7 HPFS/NTFS
>>
>> Any suggestions?
>>
>>
>>
I installed ntfs-3g and ntfsprogs from the epel repo.
I made a mount point at /mnt/Win-7
I added:
/dev/sdc1 /mnt/Win7 ntfs-3g ro,umask=0222,defaults 0 0
in /etc/fstab
I issued:
mount /dev/sdc1
In /home/mlapier/Shared
ln -s /mnt/Win7 USB1
I was able to access the contents of the drive through the sym link from
the Win-7 Pro VM.
Live is good.
--
_
°v°
/(_)\
^ ^ Mark LaPierre
Registered Linux user No #267004
https://linuxcounter.net/
****
More information about the CentOS
mailing list