[CentOS] Centos 6.4 - doesnt power off with shutdown/poweroff cmd

Hello,

 

I'm looking for help figuring out why I am having problems with shutting
down a machine.

 

I have tested the machine using Fedora 19 and Ubuntu 12 Live CD's and both
power down without issues. 

 

I added acpi.debug_level=1 to the grub boot as it was suggested to see more
info about ACPI in the logs

 

I found the following ACPI Errors in the /var/log/messages

 

Oct 11 11:51:36 plum kernel: ACPI Error (psargs-0359): [ECEN] Namespace
lookup failure, AE_NOT_FOUND

Oct 11 11:51:36 plum kernel: ACPI Error (psparse-0537): Method
parse/execution failed [\] (Node ffffffff81fdbeb0), AE_NOT_FOUND

 

Oct 11 11:51:36 plum kernel: ACPI: resource piix4_smbus [io  0x0b00-0x0b07]
conflicts with ACPI region SOR1 [io 0xb00-0xb0f]

Oct 11 11:51:36 plum kernel: ACPI: If an ACPI driver is available for this
device, you should use it instead of the native driver

 

I used the Centos 6.4 Live CD last night with no hard drive in the system. 

 

I photo'd the shutdown, here is the type up:

 

Sending all processes the TERM signal...

Sendng all processes the KILL signal...

Saving random seed:

Syncing hardware clock to system time

Turning off quotas:

umount2: Device or resource busy

umount: /dev/.initramfs/live: device is busy.

                (In some cases useful info about processes that use 

                 the device is found by lsof(8) or fuser(11))

init: Re-executing /sbin/init

Halting System...

r8169 0000:02:00.0: PME# enabled

ACPI: Preparing to enter system sleep state S5

ACPI Error (psargs-0359): [PPTS] Namespace lookup failure, AE_NOT_FOUND

ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.SBRG.EPTS] (Node fff88019dbc8c68), AE_NOT_FOUND

ACPI Error (psparse-0537): Method parse/execution failed [\PTS_] (Node
ffff88019d043560), AE_NOT_FOUND

ACPI Error (psparse-0537): Method parse/execution failed [\_PTS] (Node
ffff88019dbcf9e8), AE_NOT_FOUND

Disabling non-boot CPUS...

SMP alternatives: switching to UP code

Power Down.

acpi_power_off called

 

The system doesn't power off, it just sits there. I have to hold the power
button in for it to shut down.

 

The same still occurs with a completed a fresh minimum install of Centos
6.4, installed the EPEL repo and did yum update.

 

I'm running the latest bios for the motherboard, and even tried going back
one version.

 

MB: 785GM-E51 (MS-7596 1.2) 

CPU: AMD Phenom II x4 945 3ghz 

1TB HD, 6 Gig Mem

 

Any ideas? 

 

(Besides using a baseball bat - I am considering it)

 

Here is some hardware info from the getinfo.sh script listed the forums.

 

== BEGIN uname -rmi ==

2.6.32-358.18.1.el6.x86_64 x86_64 x86_64

== END   uname -rmi ==

 

== BEGIN rpm -qa \*-release\* ==

centos-release-6-4.el6.centos.10.x86_64

epel-release-6-8.noarch

== END   rpm -qa \*-release\* ==

 

== BEGIN cat /etc/redhat-release ==

CentOS release 6.4 (Final)

== END   cat /etc/redhat-release ==

 

== BEGIN getenforce ==

Enforcing

== END   getenforce ==

 

== BEGIN rpm -qa kernel\* | sort ==

kernel-2.6.32-358.18.1.el6.x86_64

kernel-2.6.32-358.el6.x86_64

kernel-firmware-2.6.32-358.18.1.el6.noarch

== END   rpm -qa kernel\* | sort ==

 

== BEGIN lspci -nn ==

00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS880 Host Bridge
[1022:9601]

00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to
PCI bridge (int gfx) [1022:9602]

00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to
PCI bridge (PCIE port 1) [1022:9605]

00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391]

00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]

00:12.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0
USB OHCI1 Controller [1002:4398]

00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]

00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]

00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0
USB OHCI1 Controller [1002:4398]

00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]

00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus
Controller [1002:4385] (rev 3c)

00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c]

00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00
Azalia (Intel HDA) [1002:4383]

00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]

00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to
PCI Bridge [1002:4384]

00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399]

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h
Processor HyperTransport Configuration [1022:1200]

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h
Processor Address Map [1022:1201]

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h
Processor DRAM Controller [1022:1202]

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h
Processor Miscellaneous Control [1022:1203]

00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h
Processor Link Control [1022:1204]

01:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee
ATI RS880 [Radeon HD 4200] [1002:9710]

02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)

== END   lspci -nn ==