[CentOS] Centos 6.4 - doesnt power off with shutdown/poweroff cmd

Terre Porter tporter at webpage-builders.com
Fri Oct 11 21:08:28 UTC 2013


Same result, doesn't turn off.

Any other ideas?

-----Original Message-----
From: centos-bounces at centos.org [mailto:centos-bounces at centos.org] On Behalf
Of Andrew Wyatt
Sent: Friday, October 11, 2013 4:41 PM
To: CentOS mailing list
Subject: Re: [CentOS] Centos 6.4 - doesnt power off with shutdown/poweroff
cmd

Try using the reboot=pci grub parameter.


On Fri, Oct 11, 2013 at 11:40 AM, Terre Porter <tporter at webpage-builders.com
> wrote:

> Hello,
>
>
>
> I'm looking for help figuring out why I am having problems with 
> shutting down a machine.
>
>
>
> I have tested the machine using Fedora 19 and Ubuntu 12 Live CD's and 
> both power down without issues.
>
>
>
> I added acpi.debug_level=1 to the grub boot as it was suggested to see 
> more info about ACPI in the logs
>
>
>
> I found the following ACPI Errors in the /var/log/messages
>
>
>
> Oct 11 11:51:36 plum kernel: ACPI Error (psargs-0359): [ECEN] 
> Namespace lookup failure, AE_NOT_FOUND
>
> Oct 11 11:51:36 plum kernel: ACPI Error (psparse-0537): Method 
> parse/execution failed [\] (Node ffffffff81fdbeb0), AE_NOT_FOUND
>
>
>
> Oct 11 11:51:36 plum kernel: ACPI: resource piix4_smbus [io  
> 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
>
> Oct 11 11:51:36 plum kernel: ACPI: If an ACPI driver is available for 
> this device, you should use it instead of the native driver
>
>
>
> I used the Centos 6.4 Live CD last night with no hard drive in the system.
>
>
>
> I photo'd the shutdown, here is the type up:
>
>
>
> Sending all processes the TERM signal...
>
> Sendng all processes the KILL signal...
>
> Saving random seed:
>
> Syncing hardware clock to system time
>
> Turning off quotas:
>
> umount2: Device or resource busy
>
> umount: /dev/.initramfs/live: device is busy.
>
>                 (In some cases useful info about processes that use
>
>                  the device is found by lsof(8) or fuser(11))
>
> init: Re-executing /sbin/init
>
> Halting System...
>
> r8169 0000:02:00.0: PME# enabled
>
> ACPI: Preparing to enter system sleep state S5
>
> ACPI Error (psargs-0359): [PPTS] Namespace lookup failure, 
> AE_NOT_FOUND
>
> ACPI Error (psparse-0537): Method parse/execution failed 
> [\_SB_.PCI0.SBRG.EPTS] (Node fff88019dbc8c68), AE_NOT_FOUND
>
> ACPI Error (psparse-0537): Method parse/execution failed [\PTS_] (Node 
> ffff88019d043560), AE_NOT_FOUND
>
> ACPI Error (psparse-0537): Method parse/execution failed [\_PTS] (Node 
> ffff88019dbcf9e8), AE_NOT_FOUND
>
> Disabling non-boot CPUS...
>
> SMP alternatives: switching to UP code
>
> Power Down.
>
> acpi_power_off called
>
>
>
> The system doesn't power off, it just sits there. I have to hold the 
> power button in for it to shut down.
>
>
>
> The same still occurs with a completed a fresh minimum install of 
> Centos 6.4, installed the EPEL repo and did yum update.
>
>
>
> I'm running the latest bios for the motherboard, and even tried going 
> back one version.
>
>
>
> MB: 785GM-E51 (MS-7596 1.2)
>
> CPU: AMD Phenom II x4 945 3ghz
>
> 1TB HD, 6 Gig Mem
>
>
>
> Any ideas?
>
>
>
> (Besides using a baseball bat - I am considering it)
>
>
>
> Here is some hardware info from the getinfo.sh script listed the forums.
>
>
>
> == BEGIN uname -rmi ==
>
> 2.6.32-358.18.1.el6.x86_64 x86_64 x86_64
>
> == END   uname -rmi ==
>
>
>
> == BEGIN rpm -qa \*-release\* ==
>
> centos-release-6-4.el6.centos.10.x86_64
>
> epel-release-6-8.noarch
>
> == END   rpm -qa \*-release\* ==
>
>
>
> == BEGIN cat /etc/redhat-release ==
>
> CentOS release 6.4 (Final)
>
> == END   cat /etc/redhat-release ==
>
>
>
> == BEGIN getenforce ==
>
> Enforcing
>
> == END   getenforce ==
>
>
>
> == BEGIN rpm -qa kernel\* | sort ==
>
> kernel-2.6.32-358.18.1.el6.x86_64
>
> kernel-2.6.32-358.el6.x86_64
>
> kernel-firmware-2.6.32-358.18.1.el6.noarch
>
> == END   rpm -qa kernel\* | sort ==
>
>
>
> == BEGIN lspci -nn ==
>
> 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS880 Host 
> Bridge [1022:9601]
>
> 00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 
> PCI to PCI bridge (int gfx) [1022:9602]
>
> 00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 
> PCI to PCI bridge (PCIE port 1) [1022:9605]
>
> 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI
> SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391]
>
> 00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
> SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
>
> 00:12.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI 
> SB7x0 USB OHCI1 Controller [1002:4398]
>
> 00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
> SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
>
> 00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
> SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
>
> 00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI 
> SB7x0 USB OHCI1 Controller [1002:4398]
>
> 00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
> SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
>
> 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus 
> Controller [1002:4385] (rev 3c)
>
> 00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI
> SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c]
>
> 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI 
> SBx00 Azalia (Intel HDA) [1002:4383]
>
> 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI
> SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
>
> 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 
> PCI to PCI Bridge [1002:4384]
>
> 00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
> SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399]
>
> 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h 
> Processor HyperTransport Configuration [1022:1200]
>
> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h 
> Processor Address Map [1022:1201]
>
> 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h 
> Processor DRAM Controller [1022:1202]
>
> 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h 
> Processor Miscellaneous Control [1022:1203]
>
> 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h 
> Processor Link Control [1022:1204]
>
> 01:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] 
> nee ATI RS880 [Radeon HD 4200] [1002:9710]
>
> 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
> RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 
> 03)
>
> == END   lspci -nn ==
>
>
>
>
>
>
>
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org
> http://lists.centos.org/mailman/listinfo/centos
>
_______________________________________________
CentOS mailing list
CentOS at centos.org
http://lists.centos.org/mailman/listinfo/centos




More information about the CentOS mailing list