[CentOS] [SOLVED] c6.4: D-Link USB network device (2001:1a02) not work.

[Dario Lesca]

Il giorno mar, 29/10/2013 alle 08.48 -0400, SilverTip257 ha scritto:
> On Tue, Oct 29, 2013 at 7:00 AM, Dario Lesca <d.lesca at solinos.it> wrote:
> 
> > Hi, I have plug in this USB network device:
> >
> 
> Are you running CentOS 5 or CentOS 6?

Like subject say, CentOS 6.4 

The kernel is last: 2.6.32-358.23.2.el6.x86_64

> You need to figure out what chipset your usb ethernet device uses.  Maybe
> it uses ax8817x driver like [0] says?  Or D-Link decided to change the
> chipset without changing the model number. ;)
> 
> Run lsusb and locate your device.
> Use the "Bus" and "Device" numbers in the following command so you get more
> info on just that device.
> lsusb -v -s "Bus:Device" | egrep 'id(Vendor|Product)'
> 
> If you're lucky there will be some useful information in those two fields,
> otherwise run the second command without piping it to egrep and read
> through all the verbose info for clues.
> 
> It doesn't appear the ax8817x driver is shipped with stock CentOS 6 kernels
> (and since 5 kernels are much older, don't expect it's 2.6.18.x kernel to
> include the driver which came out around 2.6.21 or .23).
> # find /lib/modules/2.6.32-358.23.2.el6.x86_64/ -iname 'ax88*' -print
> 
> And the word is that there's a bug or two [1] for the ax8817x drivers (this
> Plugable device uses a similar chipset and it appears the same driver as
> well) that aren't fixed until 3.2 series kernels.  You may just have to
> compile the module manually from source [2] which won't be horrible (since
> these instructions are for Ubuntu you'll have to adapt them for RHEL/CentOS
> as necessary).
> 
> ** Don't hold me to any of this info until you know for sure which chipset
> _you_ have!
> 
> [0] http://www.linux-usb.org/devices.html#net
> [1] http://plugable.com/products/USB3-E1000/drivers
> [2]
> http://plugable.com/2010/10/18/howto-asix-88178-usb-ethernet-adapter-on-ubuntu-10-10-linux

Thank SilverTip257 for reply, but I have solved rebuild and install the
asix driver follow this tread:

http://grinkin.ru/dlink-DUB-E100.html.

I have take the CD's Linux driver (DUB_E100_Linux_v420.zip),
unzip it and apply this patch:

> --- asix.c.orig	2011-09-19 14:48:58.000000000 +0200
> +++ asix.c	2013-10-29 14:15:18.662854310 +0100
> @@ -3412,6 +3412,10 @@
>  	USB_DEVICE (0x2001, 0x1a00),
>  	.driver_info =  (unsigned long) &dlink_dub_e100_info,
>  }, {
> +	// DLink DUB-E100
> +	USB_DEVICE (0x2001, 0x1a02),
> +	.driver_info =  (unsigned long) &ax88772b_info,
> +}, {
>  	// DLink DUB-E100B
>  	USB_DEVICE (0x2001, 0x3c05),
>  	.driver_info =  (unsigned long) &dlink_dub_e100b_info,

Now all work fine.

Thanks

-- 
Dario Lesca - sip:dario at solinos.it
(Inviato dal mio Linux Fedora19+Gnome3.8)