[CentOS] [SOLVED] c6.4: D-Link USB network device (2001:1a02) not work.

[SilverTip257]

On Tue, Oct 29, 2013 at 9:38 AM, Dario Lesca <d.lesca at solinos.it> wrote:

> Il giorno mar, 29/10/2013 alle 08.48 -0400, SilverTip257 ha scritto:
> > On Tue, Oct 29, 2013 at 7:00 AM, Dario Lesca <d.lesca at solinos.it> wrote:
> >
> > > Hi, I have plug in this USB network device:
> > >
> >
> > Are you running CentOS 5 or CentOS 6?
>
> Like subject say, CentOS 6.4
>

The subject was heavily abbreviated "c6.4" and the OS was not contained in
the body.
I saw the abbreviation after the fact.


>
> The kernel is last: 2.6.32-358.23.2.el6.x86_64
>
> > You need to figure out what chipset your usb ethernet device uses.  Maybe
> > it uses ax8817x driver like [0] says?  Or D-Link decided to change the
> > chipset without changing the model number. ;)
> >
> > Run lsusb and locate your device.
> > Use the "Bus" and "Device" numbers in the following command so you get
> more
> > info on just that device.
> > lsusb -v -s "Bus:Device" | egrep 'id(Vendor|Product)'
> >
> > If you're lucky there will be some useful information in those two
> fields,
> > otherwise run the second command without piping it to egrep and read
> > through all the verbose info for clues.
> >
> > It doesn't appear the ax8817x driver is shipped with stock CentOS 6
> kernels
> > (and since 5 kernels are much older, don't expect it's 2.6.18.x kernel to
> > include the driver which came out around 2.6.21 or .23).
> > # find /lib/modules/2.6.32-358.23.2.el6.x86_64/ -iname 'ax88*' -print
> >
> > And the word is that there's a bug or two [1] for the ax8817x drivers
> (this
> > Plugable device uses a similar chipset and it appears the same driver as
> > well) that aren't fixed until 3.2 series kernels.  You may just have to
> > compile the module manually from source [2] which won't be horrible
> (since
> > these instructions are for Ubuntu you'll have to adapt them for
> RHEL/CentOS
> > as necessary).
> >
> > ** Don't hold me to any of this info until you know for sure which
> chipset
> > _you_ have!
> >
> > [0] http://www.linux-usb.org/devices.html#net
> > [1] http://plugable.com/products/USB3-E1000/drivers
> > [2]
> >
> http://plugable.com/2010/10/18/howto-asix-88178-usb-ethernet-adapter-on-ubuntu-10-10-linux
>
> Thank SilverTip257 for reply, but I have solved rebuild and install the
> asix driver follow this tread:
>
> http://grinkin.ru/dlink-DUB-E100.html.
>
> I have take the CD's Linux driver (DUB_E100_Linux_v420.zip),
> unzip it and apply this patch:
>
> > --- asix.c.orig       2011-09-19 14:48:58.000000000 +0200
> > +++ asix.c    2013-10-29 14:15:18.662854310 +0100
> > @@ -3412,6 +3412,10 @@
> >       USB_DEVICE (0x2001, 0x1a00),
> >       .driver_info =  (unsigned long) &dlink_dub_e100_info,
> >  }, {
> > +     // DLink DUB-E100
> > +     USB_DEVICE (0x2001, 0x1a02),
> > +     .driver_info =  (unsigned long) &ax88772b_info,
> > +}, {
> >       // DLink DUB-E100B
> >       USB_DEVICE (0x2001, 0x3c05),
> >       .driver_info =  (unsigned long) &dlink_dub_e100b_info,
>
> Now all work fine.
>

Cool.


>
> Thanks
>
> --
> Dario Lesca - sip:dario at solinos.it
> (Inviato dal mio Linux Fedora19+Gnome3.8)
>
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org
> http://lists.centos.org/mailman/listinfo/centos
>



-- 
---~~.~~---
Mike
//  SilverTip257  //