[CentOS] NFS not recognizing available file space

Always Learning centos at u62.u22.net
Thu Feb 6 16:55:08 UTC 2014


On Thu, 2014-02-06 at 11:26 -0500, m.roth at 5-cent.us wrote:

> Pat Haley wrote:
> >
> > My system did not recognize the delaylog option,
> > but when I mounted with nobarrier,inode64
> > things worked and I was able to write to the
> > array!
> >
> a) please don't top post.
> b) a couple of things: first, is your system on a UPS? barrier is
> *supposed* to help make transactions atomic,
>        so that files/dbs are not left in an undefined state in case of
> power blip/outage; second, it will *VERY*
>        much speed up your NFS writes with nobarrier. We finally started
> moving people from home directories on
>        5.x to 6.x when we found that... with 5.x, uncompressing and
> untarring a 25MB file that expanded to about
>        105M, on an NFS-mounted drive was about 30 sec, while on 6.x it ran
> around 7 MINUTES. Then we found
>        nobarrier... and it went down to pretty much what it had been on 5.x.
> 
>          mark

and please DO NOT forget to eliminate all the unwanted text :-)

Thanks,



> 
> > Thanks!
> >
> > Pat
> >
> >> change mount to nobarrier,inode64,delaylog
> >>
> >> ----- Original Message -----
> >> |
> >> | Hi:
> >> |
> >> | > On Tue, Feb 4, 2014 at 1:03 PM, Pat Haley <phaley at mit.edu> wrote:
> >> | >
> >> | >> Hi,
> >> | >>
> >> | >> I have a server running under CentOS 5.8 and I appear to be in a
> >> | >> situation in which the NFS file server is not recognizing the
> >> | >> available
> >> | >> space on a particular disk (actually a hardware RAID-6 of 13 2Tb
> >> | >> disks).
> >> | >> If I try to write to the disk I get the following error message
> >> | >>
> >> | >> [root at nas-0-1 mseas-data-0-1]# touch dum
> >> | >> touch: cannot touch `dum': No space left on device
> >> | >>
> >> | >> However, if I check the available space, there seems to
> >> | >> be plenty
> >> | >>
> >> | >> [root at nas-0-1 mseas-data-0-1]# df -h .
> >> | >> Filesystem            Size  Used Avail Use% Mounted on
> >> | >> /dev/sdb1              21T   20T  784G  97% /mseas-data-0-1
> >> | >>
> >> | >
> >> | > Maybe you're hitting the allocation of reserved blocks for root?
> >> | > With your disk usage of 97% I'd think that could be the case.
> >> | >
> >> | > You didn't say what file system you're using for that 21TB array,
> >> | > so we
> >> | > (this list) won't be of too much help without knowing that.
> >> |
> >> | xfs file system.  The fstab line for this array is:
> >> |
> >> | /dev/sdb1               /mseas-data-0-1         xfs     defaults
> >> |        1 0
> >> |
> >> | >
> >> | > tune2fs [0] is your friend
> >> |
> >> | if I read the man pages correctly tune2fs will not work for xfs.
> >> |  From xfs_info I get the following for mseas-data-0-1
> >> |
> >> | [root at nas-0-1 mseas-data-0-1]# xfs_info .
> >> | meta-data=/dev/sdb1              isize=256    agcount=32,
> >> | agsize=167846667 blks
> >> |           =                       sectsz=512   attr=1
> >> | data     =                       bsize=4096   blocks=5371093344,
> >> | imaxpct=25
> >> |           =                       sunit=0      swidth=0 blks,
> >> |           unwritten=1
> >> | naming   =version 2              bsize=4096
> >> | log      =internal               bsize=4096   blocks=32768, version=1
> >> |           =                       sectsz=512   sunit=0 blks,
> >> |           lazy-count=0
> >> | realtime =none                   extsz=4096   blocks=0, rtextents=0
> >> |
> >> | Unfortunately, I don't know how to interpret this or if
> >> | it is giving relevant information to the question at hand>
> >> |
> >> | > - use it to determine if there are reserved blocks
> >> | > - use it to adjust the settings
> >> | >
> >> | > [0]
> >> | > https://wiki.archlinux.org/index.php/ext4#Remove_reserved_blocks
> >> | >
> >> | >
> >> | >> [root at nas-0-1 mseas-data-0-1]# df -i .
> >> | >> Filesystem            Inodes   IUsed   IFree IUse% Mounted on
> >> | >> /dev/sdb1            3290047552 4391552 3285656000    1%
> >> | >> /mseas-data-0-1
> >> | >>
> >> | >> I don't know if the following is relevant but the disk in question
> >> | >> is served as one of 3 bricks in a gluster namespace.
> >> | >>
> >> | >> Based on the test with touch, which is happening directly
> >> | >> at the NFS level, this seems to be an NFS rather than gluster
> >> | >> issue. I couldn't find any file in /var/log which had a
> >> | >> time that corresponded to the failed touch test and I didn't
> >> | >> see anything in dmesg.  We have tried rebooting this system.
> >> | >> What else should we look at and/or try to resolve or debug
> >> | >> this issue?
> >> | >>
> >> | >
> >> | > If you have a non-root shell account on that box, can you write to
> >> | > that
> >> | > array from the NFS host?
> >> | > ( Take NFS out of the equation. )
> >> |
> >> | Unfortunately we only have a root account on that box.
> >> |
> >> | >
> >> | >
> >> | >> Thanks.
> >> | >>
> >> | >> Pat
> >> | >>
> >> | >> -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
> >> | >> Pat Haley                          Email:  phaley at mit.edu
> >> | >> Center for Ocean Engineering       Phone:  (617) 253-6824
> >> | >> Dept. of Mechanical Engineering    Fax:    (617) 253-8125
> >> | >> MIT, Room 5-213                    http://web.mit.edu/phaley/www/
> >> | >> 77 Massachusetts Avenue
> >> | >> Cambridge, MA  02139-4301
> >> | >> _______________________________________________
> >> | >> CentOS mailing list
> >> | >> CentOS at centos.org
> >> | >> http://lists.centos.org/mailman/listinfo/centos
> >> | >>
> >> | >
> >> | >
> >> | >
> >> |
> >> |
> >> | --
> >> |
> >> | -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
> >> | Pat Haley                          Email:  phaley at mit.edu
> >> | Center for Ocean Engineering       Phone:  (617) 253-6824
> >> | Dept. of Mechanical Engineering    Fax:    (617) 253-8125
> >> | MIT, Room 5-213                    http://web.mit.edu/phaley/www/
> >> | 77 Massachusetts Avenue
> >> | Cambridge, MA  02139-4301
> >> | _______________________________________________
> >> | CentOS mailing list
> >> | CentOS at centos.org
> >> | http://lists.centos.org/mailman/listinfo/centos
> >> |
> >>
> >
> >
> > --
> >
> > -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
> > Pat Haley                          Email:  phaley at mit.edu
> > Center for Ocean Engineering       Phone:  (617) 253-6824
> > Dept. of Mechanical Engineering    Fax:    (617) 253-8125
> > MIT, Room 5-213                    http://web.mit.edu/phaley/www/
> > 77 Massachusetts Avenue
> > Cambridge, MA  02139-4301
> > _______________________________________________
> > CentOS mailing list
> > CentOS at centos.org
> > http://lists.centos.org/mailman/listinfo/centos
> >
> 
> 
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org
> http://lists.centos.org/mailman/listinfo/centos

CUT OUT TEXT NOT RELEVANT.

Many thanks.

-- 
Paul.
England,
EU.

   Our systems are exclusively Linux. No Micro$oft Windoze here.




More information about the CentOS mailing list