<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
This can be caused by overheating. If the drives are mounted close
together as some chassis configurations permit, then it make sense they
may both exhibit the same problem, but not necessarily simultaneously.<br>
<br>
Are this log entries adjacent to each other?<br>
<br>
P.<br>
<br>
<br>
Scott Silva wrote:
<blockquote cite="mideeuuth$6ql$1@sea.gmane.org" type="cite">
<pre wrap="">Bowie Bailey spake the following on 9/21/2006 12:56 PM:
</pre>
<blockquote type="cite">
<pre wrap="">One of my CentOS boxes has started giving me errors. The box is
CentOS-4.4 (i386) fully updated. It has a pair of SATA drives in a
software raid 1 configuration.
The errors I see are:
ata1: command 0xca timeout, stat 0x50 host_stat 0x24
ata1: status=0x50 { DriveReady SeekComplete }
Info fld=0x1e22b8, Current sda: sense key No Sense
ata2: command 0xca timeout, stat 0x50 host_stat 0x24
ata2: status=0x50 { DriveReady SeekComplete }
Info fld=0x1e2598, Current sdb: sense key No Sense
If it was just coming from one drive, I would say it was a bad drive,
but this is happening on both drives.
Can anyone give me a starting place to diagnose this?
Thanks.
--
Bowie
</pre>
</blockquote>
<pre wrap=""><!---->Cables? Connections? Power supply going bad?
</pre>
</blockquote>
</body>
<br />--
<br />This message has been scanned for viruses and
<br />dangerous content by the
<a href="http://www.enhancion.net/"><b>Enhancion</b></a> system scanner,
<br />and is believed to be clean.
</html>