I have an IBM System x 3250 that successfully boots using the standard kernel (2.6.18-8.1.10.el5) but fails to boot with the xen kernel. The kernel appears to fail when it attempts to initialize the driver for the onboard SAS controller (LSI Logic / Symbios Logic SAS1064E PCI-Express Fusion-MPT SAS). Can anyone provide any advice? Here's the relevant info. Please let me know if any other information would be helpful.
<br><br>IBM System x 3250: dual-core Pentium D 3GHz, 3GB memory<br><br>[root@xenhost2 ~]# lspci<br>00:00.0 Host bridge: Intel Corporation E7230/3000/3010 Memory Controller Hub (rev c0)<br>00:01.0 PCI bridge: Intel Corporation E7230/3000/3010 PCI Express Root Port (rev c0)
<br>00:03.0 PCI bridge: Intel Corporation 82975X/3010 PCI Express Root Port (rev c0)<br>00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)<br>00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 (rev 01)
<br>00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 (rev 01)<br>00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)<br>00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
<br>00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)<br>00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)<br>00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
<br>00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)<br>00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)<br>00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
<br>00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)<br>01:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express (rev 21)<br>03:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express (rev 21)
<br>05:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1064E PCI-Express Fusion-MPT SAS (rev 02)<br>1a:04.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)<br><br>[root@xenhost2 ~]# rpm -qa | grep xen
<br>kernel-xen-devel-2.6.18-8.1.14.el5<br>xen-libs-3.0.3-25.0.3.el5<br>kernel-xen-2.6.18-8.1.14.el5<br>xen-3.0.3-25.0.3.el5<br>xen-devel-3.0.3-25.0.3.el5<br><br>kernel output (via serial console):<br>Xen version 3.0.3-rc5-8.1.14.el5
(mockbuild@) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) Thu Sep 27 18:50:52 EDT 27<br> Latest ChangeSet: unavailable <br>
<br>(XEN) Command line: /xen.gz-2.6.18-8.1.14.el5 com1=38400,8n1 <br>(XEN) Physical RAM map: <br>(XEN) 0000000000000000 - 000000000009e800 (usable)
<br>(XEN) 000000000009e800 - 00000000000a0000 (reserved) <br>(XEN) 00000000000d6000 - 00000000000d8000 (reserved) <br>(XEN) 00000000000e0000 - 0000000000100000 (reserved)
<br>(XEN) 0000000000100000 - 00000000bfed0000 (usable) <br>(XEN) 00000000bfed0000 - 00000000bfee1000 (ACPI data) <br>(XEN) 00000000bfee1000 - 00000000bff00000 (ACPI NVS)
<br>(XEN) 00000000bff00000 - 00000000c0000000 (reserved) <br>(XEN) 00000000fec00000 - 00000000fec10000 (reserved) <br>(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
<br>(XEN) 00000000ff000000 - 0000000100000000 (reserved)<br>(XEN) System RAM: 3070MB (3144120kB)<br>(XEN) Xen heap: 14MB (14356kB)<br>(XEN) found SMP MP-table at 000f68e0<br>(XEN) DMI present.<br>(XEN) Using APIC driver default
<br>(XEN) ACPI: RSDP (v000 PTLTD ) @ 0x00000000000f68b0<br>(XEN) ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x00000000bfed9b7a<br>(XEN) ACPI: FADT (v001 INTEL 0x06040000 PTL 0x00000003) @ 0x00000000bfee0e70
<br>(XEN) ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0x00000000bfee0ee4<br>(XEN) ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x00000000bfee0f20<br>(XEN) ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x00000000bfee0f88
<br>(XEN) ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @ 0x00000000bfee0fb0<br>(XEN) ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050228) @ 0x00000000bfed9bb6<br>(XEN) ACPI: DSDT (v001 INTEL GLENWOOD 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000
<br>(XEN) ACPI: Local APIC address 0xfee00000<br>(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)<br>(XEN) Processor #0 15:6 APIC version 20<br>(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)<br>(XEN) Processor #1 15:6 APIC version 20
<br>(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])<br>(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])<br>(XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])<br>(XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
<br>(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)<br>(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)<br>(XEN) ACPI: IRQ0 used by override.<br>(XEN) ACPI: IRQ2 used by override.<br>(XEN) ACPI: IRQ9 used by override.
<br>(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs<br>(XEN) Using ACPI (MADT) for SMP configuration information<br>(XEN) Using scheduler: SMP Credit Scheduler (credit)<br>(XEN) Initializing CPU#0<br>(XEN) Detected 3000.299
MHz processor.<br>(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K<br>(XEN) CPU: L2 cache: 2048K<br>(XEN) CPU: Physical Processor ID: 0<br>(XEN) CPU: Processor Core ID: 0<br>(XEN) Intel machine check architecture supported.
<br>(XEN) Intel machine check reporting enabled on CPU#0.<br>(XEN) CPU0: Intel P4/Xeon Extended MCE MSRs (24) available<br>(XEN) CPU0: Thermal monitoring handled by SMI<br>(XEN) CPU0: Intel(R) Pentium(R) D CPU 3.00GHz stepping 05
<br>(XEN) Booting processor 1/1 eip 90000<br>(XEN) Initializing CPU#1<br>(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K<br>(XEN) CPU: L2 cache: 2048K<br>(XEN) CPU: Physical Processor ID: 0<br>(XEN) CPU: Processor Core ID: 1
<br>(XEN) Intel machine check architecture supported.<br>(XEN) Intel machine check reporting enabled on CPU#1.<br>(XEN) CPU1: Intel P4/Xeon Extended MCE MSRs (24) available<br>(XEN) CPU1: Thermal monitoring enabled<br>(XEN) CPU1: Intel(R) Pentium(R) D CPU
3.00GHz stepping 05<br>(XEN) Total of 2 processors activated.<br>(XEN) ENABLING IO-APIC IRQs<br>(XEN) -> Using new ACK method<br>(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1<br>(XEN) checking TSC synchronization across 2 CPUs: passed.
<br>(XEN) Platform timer is 1.193MHz PIT<br>(XEN) Brought up 2 CPUs<br>(XEN) Machine check exception polling timer started.<br>(XEN) *** LOADING DOMAIN 0 ***<br>(XEN) Domain 0 kernel supports features = { 0000001f }.<br>(XEN) Domain 0 kernel requires features = { 00000000 }.
<br>(XEN) PHYSICAL MEMORY ARRANGEMENT:<br>(XEN) Dom0 alloc.: 0000000002000000->0000000004000000 (731834 pages to be allocated)<br>(XEN) VIRTUAL MEMORY ARRANGEMENT:<br>(XEN) Loaded kernel: ffffffff80200000->ffffffff806cc804
<br>(XEN) Init. ramdisk: ffffffff806cd000->ffffffff80c9c600<br>(XEN) Phys-Mach map: ffffffff80c9d000->ffffffff812425d0<br>(XEN) Start info: ffffffff81243000->ffffffff8124349c<br>(XEN) Page tables: ffffffff81244000->ffffffff81251000
<br>(XEN) Boot stack: ffffffff81251000->ffffffff81252000<br>(XEN) TOTAL: ffffffff80000000->ffffffff81400000<br>(XEN) ENTRY ADDRESS: ffffffff80200000<br>(XEN) Dom0 has maximum 2 VCPUs<br>(XEN) Initrd len 0x5cf600, start at 0xffffffff806cd000
<br>(XEN) Scrubbing Free RAM: ...............................done.<br>(XEN) Xen trace buffers: disabled<br>(XEN) Xen is relinquishing VGA console.<br>(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen).
<br>kernel direct mapping tables up to b52ba000 @ 1254000-1db0000<br>Bootdata ok (command line is ro root=/dev/VolGroup01/LogVol00 noapic acpi=off console=tty console=ttyS0 console=xvc xenc)<br>Linux version 2.6.18-8.1.14.el5xen
(<a href="mailto:mockbuild@builder6.centos.org">mockbuild@builder6.centos.org</a>) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SM7<br>BIOS-provided physical RAM map:<br> Xen: 0000000000000000 - 00000000b52ba000 (usable)
<br>DMI present.<br>Intel MultiProcessor Specification v1.4<br> Virtual Wire compatibility mode.<br>OEM ID: INTEL Product ID: GLENWOOD APIC at: 0xFEE00000<br>I/O APIC #2 Version 32 at 0xFEC00000.<br>Setting APIC routing to xen
<br>Processors: 2<br>Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000)<br>Built 1 zonelists. Total pages: 742074<br>Kernel command line: ro root=/dev/VolGroup01/LogVol00 noapic acpi=off console=tty console=ttyS0 console=xvc xenconsole=tc
<br>Initializing CPU#0<br>PID hash table entries: 4096 (order: 12, 32768 bytes)<br>Xen reported: 3000.298 MHz processor.<br>Console: colour VGA+ 80x25<br>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)<br>
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)<br>Software IO TLB enabled: <br> Aperture: 64 megabytes<br> Kernel range: 0xffff880004b83000 - 0xffff880008b83000<br>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<br>Memory: 2823548k/2968296k available (2320k kernel code, 135900k reserved, 1312k data, 168k init)<br>Calibrating delay using timer specific routine.. 7504.29 BogoMIPS (lpj=15008593)<br>Security Framework v1.0.0 initialized
<br>SELinux: Initializing.<br>SELinux: Starting in permissive mode<br>selinux_register_security: Registering secondary module capability<br>Capability LSM initialized as secondary<br>Mount-cache hash table entries: 256
<br>CPU: Trace cache: 12K uops, L1 D cache: 16K<br>CPU: L2 cache: 2048K<br>CPU: Physical Processor ID: 0<br>CPU: Processor Core ID: 0<br>(SMP-)alternatives turned off<br>Brought up 2 CPUs<br>Initializing CPU#1<br>migration_cost=812
<br>checking if image is initramfs... it is<br>Grant table initialized<br>NET: Registered protocol family 16<br>ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread 10387A0 could not acquire Mutex [2] [20060707]<br>PCI: Using configuration type 1
<br>ACPI: Interpreter disabled.<br>Linux Plug and Play Support v0.97 (c) Adam Belay<br>pnp: PnP ACPI: disabled<br>xen_mem: Initialising balloon driver.<br>usbcore: registered new driver usbfs<br>usbcore: registered new driver hub
<br>PCI: Probing PCI hardware<br>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1<br>PCI: Transparent bridge - 0000:00:1e.0<br>PCI: Using IRQ router PIIX/ICH [8086/27b8] at 0000:00:1f.0<br>PCI: Found IRQ 11 for device 0000:00:
1f.1<br>PCI: Sharing IRQ 11 with 0000:00:1d.2<br>PCI: Sharing IRQ 11 with 0000:1a:04.0<br>NetLabel: Initializing<br>NetLabel: domain hash size = 128<br>NetLabel: protocols = UNLABELED CIPSOv4<br>NetLabel: unlabeled traffic allowed by default
<br>PCI: Bridge: 0000:00:01.0<br> IO window: disabled.<br> MEM window: disabled.<br> PREFETCH window: disabled.<br>PCI: Bridge: 0000:00:03.0<br> IO window: disabled.<br> MEM window: disabled.<br> PREFETCH window: disabled.
<br>PCI: Bridge: 0000:00:1c.0<br> IO window: 4000-4fff<br> MEM window: d0100000-d01fffff<br> PREFETCH window: c4000000-c40fffff<br>PCI: Bridge: 0000:00:1c.4<br> IO window: disabled.<br> MEM window: d0200000-d02fffff<br>
PREFETCH window: disabled.<br>PCI: Bridge: 0000:00:1c.5<br> IO window: disabled.<br> MEM window: d0300000-d03fffff<br> PREFETCH window: disabled.<br>PCI: Bridge: 0000:00:1e.0<br> IO window: 5000-5fff<br> MEM window: d0400000-d04fffff
<br> PREFETCH window: d8000000-dfffffff<br>PCI: Found IRQ 7 for device 0000:00:01.0<br>PCI: Sharing IRQ 7 with 0000:00:03.0<br>IRQ routing conflict for 0000:00:1c.0, have irq 10, want irq 7<br>IRQ routing conflict for 0000:00:
1c.4, have irq 10, want irq 7<br>PCI: Sharing IRQ 7 with 0000:00:1d.3<br>PCI: Sharing IRQ 7 with 0000:05:00.0<br>PCI: Sharing IRQ 7 with 0000:01:00.0<br>PCI: Found IRQ 7 for device 0000:00:03.0<br>PCI: Sharing IRQ 7 with 0000:00:
01.0<br>IRQ routing conflict for 0000:00:1c.0, have irq 10, want irq 7<br>IRQ routing conflict for 0000:00:1c.4, have irq 10, want irq 7<br>PCI: Sharing IRQ 7 with 0000:00:1d.3<br>PCI: Sharing IRQ 7 with 0000:05:00.0<br>PCI: Sharing IRQ 7 with 0000:01:
00.0<br>PCI: Found IRQ 7 for device 0000:00:1c.0<br>PCI: Sharing IRQ 7 with 0000:00:01.0<br>PCI: Sharing IRQ 7 with 0000:00:03.0<br>IRQ routing conflict for 0000:00:1c.0, have irq 10, want irq 7<br>IRQ routing conflict for 0000:00:
1c.4, have irq 10, want irq 7<br>PCI: Sharing IRQ 7 with 0000:00:1d.3<br>PCI: Sharing IRQ 7 with 0000:05:00.0<br>PCI: Sharing IRQ 7 with 0000:01:00.0<br>PCI: Found IRQ 7 for device 0000:00:1c.4<br>PCI: Sharing IRQ 7 with 0000:00:
01.0<br>PCI: Sharing IRQ 7 with 0000:00:03.0<br>IRQ routing conflict for 0000:00:1c.0, have irq 10, want irq 7<br>IRQ routing conflict for 0000:00:1c.4, have irq 10, want irq 7<br>PCI: Sharing IRQ 7 with 0000:00:1d.3<br>PCI: Sharing IRQ 7 with 0000:05:
00.0<br>PCI: Sharing IRQ 7 with 0000:01:00.0<br>PCI: Found IRQ 10 for device 0000:00:1c.5<br>IRQ routing conflict for 0000:00:1c.5, have irq 11, want irq 10<br>PCI: Sharing IRQ 10 with 0000:03:00.0<br>NET: Registered protocol family 2
<br>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)<br>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)<br>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)<br>TCP: Hash tables configured (established 262144 bind 65536)
<br>TCP reno registered<br>IA-32 Microcode Update Driver: v1.14-xen <<a href="mailto:tigran@veritas.com">tigran@veritas.com</a>><br>audit: initializing netlink socket (disabled)<br>audit(1190996114.036:1): initialized
<br>VFS: Disk quotas dquot_6.5.1<br>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)<br>SELinux: Registering netfilter hooks<br>Initializing Cryptographic API<br>ksign: Installing public key data<br>Loading keyring
<br>- Added public key AB7AA145C3566FE7<br>- User ID: CentOS (Kernel Module GPG key)<br>io scheduler noop registered<br>io scheduler anticipatory registered<br>io scheduler deadline registered<br>io scheduler cfq registered (default)
<br>assign_interrupt_mode Found MSI capability<br>assign_interrupt_mode Found MSI capability<br>assign_interrupt_mode Found MSI capability<br>assign_interrupt_mode Found MSI capability<br>assign_interrupt_mode Found MSI capability
<br>pci_hotplug: PCI Hot Plug PCI Core version: 0.5<br>Real Time Clock Driver v1.12ac<br>Non-volatile memory driver v1.2<br>Linux agpgart interface v0.101 (c) Dave Jones<br>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
<br>Xen virtual console successfully installed as ttyS0<br>Event-channel device installed.<br>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2<br>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<br>ICH7: IDE controller at PCI slot 0000:00:1f.1<br>PCI: Found IRQ 11 for device 0000:00:1f.1<br>PCI: Sharing IRQ 11 with 0000:00:1d.2<br>PCI: Sharing IRQ 11 with 0000:1a:04.0<br>ICH7: chipset revision 1<br>ICH7: not 100% native mode: will probe irqs later
<br> ide0: BM-DMA at 0x30a0-0x30a7, BIOS settings: hda:DMA, hdb:pio<br> ide1: BM-DMA at 0x30a8-0x30af, BIOS settings: hdc:pio, hdd:pio<br>hda: UJDA770 DVD/CDRW, ATAPI CD/DVD-ROM drive<br>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<br>ide-floppy driver 0.99.newide<br>usbcore: registered new driver hiddev<br>usbcore: registered new driver usbhid<br>drivers/usb/input/hid-core.c: v2.6:USB HID core driver<br>PNP: No PS/2 controller found. Probing ports directly.
<br>serio: i8042 AUX port at 0x60,0x64 irq 12<br>serio: i8042 KBD port at 0x60,0x64 irq 1<br>mice: PS/2 mouse device common for all mice<br>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27<br>md: bitmap version 4.39<br>
PCI: Sharing IRQ 7 with 0000:05:00.0<br>PCI: Sharing IRQ 7 with 0000:01:00.0<br>uhci_hcd 0000:00:1d.3: UHCI Host Controller<br>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4<br>uhci_hcd 0000:00:1d.3: irq 7, io base 0x00003060
<br>usb usb4: configuration #1 chosen from 1 choice<br>hub 4-0:1.0: USB hub found<br>hub 4-0:1.0: 2 ports detected<br>PCI: Found IRQ 5 for device 0000:00:1d.7<br>PCI: Sharing IRQ 5 with 0000:00:1d.0<br>ehci_hcd 0000:00:1d.7
: EHCI Host Controller<br>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5<br>ehci_hcd 0000:00:1d.7: debug port 1<br>ehci_hcd 0000:00:1d.7: irq 5, io mem 0xd0000000<br>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI
1.00, driver 10 Dec 2004<br>usb usb5: configuration #1 chosen from 1 choice<br>hub 5-0:1.0: USB hub found<br>hub 5-0:1.0: 8 ports detected<br>SCSI subsystem initialized<br>Fusion MPT base driver 3.04.02<br>Copyright (c) 1999-2005 LSI Logic Corporation
<br>Fusion MPT SAS Host driver 3.04.02<br>PCI: Found IRQ 7 for device 0000:05:00.0<br>PCI: Sharing IRQ 7 with 0000:00:01.0<br>PCI: Sharing IRQ 7 with 0000:00:03.0<br>IRQ routing conflict for 0000:00:1c.0, have irq 10, want irq 7
<br>IRQ routing conflict for 0000:00:1c.4, have irq 10, want irq 7<br>PCI: Sharing IRQ 7 with 0000:00:1d.3<br>PCI: Sharing IRQ 7 with 0000:01:00.0<br>mptbase: Initiating ioc0 bringup<br>ioc0: SAS1064E: Capabilities={Initiator}
<br>mptbase: Initiating ioc0 recovery<br>BUG: soft lockup detected on CPU#1!<br><br>Call Trace:<br> <IRQ> [<ffffffff802a76ad>] softlockup_tick+0xdb/0xed<br> [<ffffffff8026ba66>] timer_interrupt+0x396/0x3f2
<br> [<ffffffff80210a87>] handle_IRQ_event+0x2d/0x60<br> [<ffffffff802a79ec>] __do_IRQ+0xa4/0x105<br> [<ffffffff802699b3>] do_IRQ+0xe7/0xf5<br> [<ffffffff8038dde8>] evtchn_do_upcall+0x86/0xe0<br> [<ffffffff8025cc1a>] do_hypervisor_callback+0x1e/0x2c
<br> [<ffffffff8020c70a>] __delay+0x6/0x10<br> [<ffffffff880c2d0a>] :mptbase:WaitForDoorbellInt+0xbe/0xe9<br> [<ffffffff880c2f3f>] :mptbase:mpt_handshake_req_reply_wait+0x138/0x296<br> [<ffffffff880c38a3>] :mptbase:SendIocInit+0x242/0x325
<br> [<ffffffff880c32d5>] :mptbase:GetIocFacts+0x7e/0x253<br> [<ffffffff880c4459>] :mptbase:MakeIocReady+0x62f/0xa67<br> [<ffffffff880c6b2b>] :mptbase:mpt_do_ioc_recovery+0xfbd/0xffd<br> [<ffffffff803282e8>] __next_cpu+0x19/0x28
<br> [<ffffffff8027efa9>] find_busiest_group+0x1db/0x44a<br> [<ffffffff802809ca>] rebalance_tick+0x1be/0x411<br> [<ffffffff802958f4>] run_posix_cpu_timers+0x25/0x690<br> [<ffffffff880c6c1c>] :mptbase:mpt_HardResetHandler+0xb1/0x123
<br> [<ffffffff880c6c8e>] :mptbase:mpt_timer_expired+0x0/0x24<br> [<ffffffff880c6c99>] :mptbase:mpt_timer_expired+0xb/0x24<br> [<ffffffff8028b7a4>] run_timer_softirq+0x13f/0x1c6<br> [<ffffffff80211ed3>] __do_softirq+0x62/0xdd
<br> [<ffffffff8025d0e8>] call_softirq+0x1c/0x28<br> [<ffffffff80269b3d>] do_softirq+0x31/0x98<br> [<ffffffff802699b8>] do_IRQ+0xec/0xf5<br> [<ffffffff8038dde8>] evtchn_do_upcall+0x86/0xe0<br> [<ffffffff8025cc1a>] do_hypervisor_callback+0x1e/0x2c
<br> <EOI> [<ffffffff802063aa>] hypercall_page+0x3aa/0x1000<br> [<ffffffff802063aa>] hypercall_page+0x3aa/0x1000<br> [<ffffffff8026afe2>] raw_safe_halt+0x84/0xa8<br> [<ffffffff802684f8>] xen_idle+0x38/0x4a
<br> [<ffffffff80247bcd>] cpu_idle+0x97/0xba<br><br>scsi0 : ioc0: LSISAS1064E, FwRev=01100000h, Ports=1, MaxQ=511, IRQ=7<br>mptbase: Initiating ioc0 recovery<br>BUG: soft lockup detected on CPU#1!<br><br><br>