<br><br>----- Message d'origine -----<br>De: Ken Price <kprice@nowyouknow.net><br>Date: Mardi, Novembre 13, 2007 11:04 am<br>Objet: Re: [CentOS] Need advice on storage<br>À: centos@centos.org<br><br>> > Thanks Ken.That's a good thing  to know that software striping <br>> won't  <br>> > really boost performance, i  then won't waste money on that <br>> avenue.   <br>> > I cannot explain why as i  don't know about Linux drivers  <br>> > architecture and general system low  level behavior but maybe  <br>> > somebody on this list could give us a<br>> <br>> It's not specific to Linux, but RAID in general.  You need more <br>> than  <br>> two disks to get any significant increase in performance.  In <br>> fact,  <br>> you may get better performance with Linux software RAID than <br>> hardware  <br>> RAID.  Linux software RAID is really quite robust.<br>> <br>> > clue.As i said on my previous post, i found that the server is <br>>  <br>> > inside a rack that has a VTRAK 15100 SCSI to SATA Enclosure <br>> with a   <br>> > free SCSI bus (the unit has 2 independant bus) and hard disk <br>> slots.   <br>> >  I think we have a spare Adaptec 39160 so if it's the case, i <br>> could   <br>> > go with this solution and buy 4 x WD 250 Gigs "YS" (RAID) <br>> serie   <br>> > drives @ about 75$ each and put all this in RAID 10.  The unit <br>>  <br>> > supports NCQ.  It remains to be seen how well it can perform <br>> even if  <br>> >  they are talking about "up to 200 MBps".Regards,Guy Boisvert<br>> <br>> I've used both the Promise UltraTrak SX8000 (8-disk RAID50) and  <br>> UltraTrak SX4000<br>> (4-disk Raid10).  Performance was adequate, but I was using Dell <br>> <br>> PERC2/3 RAID cards.  In testing, a plain-jane Adaptec SCSI card  <br>> coupled with software RAID gave "significantly" better results.<br>> <br>> Cheers.<br>> -Ken<br>> <br>Hi Ken,<br><br>Well, i should be OK with my Adaptec 39160 then.  I'll see if the VTrak 15100 we have is able to push respectable numbers in RAID 10.  But as "<a href='javascript:addSender("\"redhat@mckerrs.net\" <redhat@mckerrs.net>")'>redhat@mckerrs.net</a>" stated in another post, it will be plugged in a straight 32 bits PCI bus on a crappy mainboard so it's a temporary solution until we get the budget for a new server.  But it should be relatively easy to beat a single 200 Gig IDE non NCQ drive!<br><br>Thanks!<br><br>Guy Boisvert<br>