<html><head><style type="text/css"><!-- DIV {margin:0px;} --></style></head><body><div style="font-family:times new roman,new york,times,serif;font-size:12pt"><div><div>In my haste for help, I stupidly hit reply and changed the subject which I thought was enough for a new message, not giving much thought for the threading, etc. So apologies for the hijack, although I would think it fairly obvious that it wasn't deliberate or obvious to me... or a big deal really. My mail doesn't thread.<br><br>Some further info for those actually interested in helping, I forgot that the HD in question had an Ubuntu 8.10 install on it, so I fired that up and hdparm -t produced 56MB/Sec. So the issue is either kernel or config.<br><br>Thanks for your patience.<br></div><br><font face="Tahoma" size="2">----- Forwarded Message ----<br><b><span style="font-weight: bold;"></span></b></font><br><div style="font-family: times new roman,new york,times,serif; font-size:
 12pt;"><div><br></div><div style="font-family: times new roman,new york,times,serif; font-size: 12pt;">I
have a system who's normal activity is running Xen 3.3.1 with Centos
5.3 as the DomU. I had reason to connect an IDE drive to the single IDE
interface that this board has. I was getting slow performance. hdparm
-t revealed that the thoughput was down to just 2.7 MB/sec. After some
tweaking (switch on 32 bit,etc) and retesting under a non-Xen config, I
managed to get that to 8MB/Sec. When I move the drive to a USB to IDE
adapter, hdparm -t gives me about 18MB/Sec. Big improvement, although I
don't know if it is then perfect..<br><br><br><br>My kernel is
2.6.18-128.4.1.el5. I have kernel parameter pci=nomsi. I can't remember
exactly why I needed this, but there was a good reason, maybe SATA
drive not working properly or some such. Could this be the cause of my
issue?<br><br>The
motherboard blurb states that the IDE interface is ATA/133 compliant
and I am using the provided IDE cable. I have tried three hard disks,
all with similar results. (2x 40gb + 1x 160gb)<br><br>lspci | grep IDE gives<br>00:06.0 IDE interface: nVidia Corporation MCP78S [GeForce 8200] IDE (rev a1) <br><br>As a reference, hdparm -t against the SATA drive in AHCI mode on the same board gives about 110MB/Sec.<br><br>Any ideas, anyone?<br><br>Thanks in advance,<br><br>Ian.<br></div></div></div></div><br>



      </body></html>