I'm having trouble with the bridged network setup.  I'm new to kvm, but I got a window xp sp2 guest set up without trouble a few days ago. I followed the instructions in the RH virtualization guide, and all was fine until I had to reboot the host machine a few days later.  <br>
<br>Then, I lost networking altogether on the host machine. I lost track of all the things I tried, but finally got networking back on the host, but I suspect it's not right.<br><br>For one thing, I deleted ifcfg-br0.  Also, I commented out bridge=br0 in ifcfg-eth0. Oddly, ifconfig shows both interfaces, and shows them both set to static ip.  <br>
<br>One of the points I'm confused about is what, if anything, to write for the ip address in ifcfg-eth0. <br><br>When I first set it up, I set the bridge interface to dhcp, and kept the host as a static ip on my lan. That made made the host dhcp, but that's no good for me, so I set the ip in ifcfg-br0  to my static ip, and everything worked fine, even though it didn't make sense that both eth0 and br0 had the same ip.<br>
<br>Thanks for any guidance.<br><br><br><br><br><br><br><br><br><br>
<br><br>