announce June 2018

announce@lists.centos.org

3 participants
17 discussions

Announcing the release of Gluster 4.1 on CentOS Linux 6 x86_64
by Niels de Vos 27 Jun '18

27 Jun '18

I am happy to announce the General Availability of Gluster 4.1 for CentOS 6 on x86_64. These packages are following the upstream Gluster Community releases, and will receive monthly bugfix updates. Gluster 4.1 is a Long-Term-Maintenance release, and will receive updates for approximately 18 months. The difference between Long-Term-Maintenance and Short-Term-Maintenance releases is explained on the Gluster release schedule page: https://www.gluster.org/community/release-schedule/ Users of CentOS 6 can now simply install the Gluster 4.1 clients with only these two commands: # yum install centos-release-gluster # yum install glusterfs-fuse Note that Gluster 4.x do not provide the glusterfs-server package for CentOS 6 anymore. Users that run their Gluster Storage Servers on CentOS 6 are strongly encouraged to plan moving to CentOS 7. The centos-release-gluster package is delivered via CentOS Extras repos. This contains all the metadata and dependency information, needed to install Gluster 4.1. The actual package that will get installed is centos-release-gluster41. Users of the now End-Of-Life Short-Term-Maintenance Gluster 4.0 will automatically get the update to Gluster 4.1, whereas users of Gluster 3.12 can stay on that Long-Term-Maintenance release for an other six months. Users of Gluster 3.10 will need to manually upgrade by uninstalling the centos-release-gluster310 package, and replacing it with either the Gluster 4.1 or 3.12 version. Additional details about the upgrade process are linked in the announcement from the Gluster Community: https://lists.gluster.org/pipermail/announce/2018-June/000102.html We have a quickstart guide specifically built around the packages are available, it makes for a good introduction to Gluster and will help get you started in just a few simple steps, this quick start is available at https://wiki.centos.org/SpecialInterestGroup/Storage/gluster-Quickstart More details about the packages that the Gluster project provides in the Storage SIG is available in the documentation: https://wiki.centos.org/SpecialInterestGroup/Storage/Gluster The centos-release-gluster* repositories offer additional packages that enhance the usability of Gluster itself. Utilities and tools that were working with previous versions of Gluster are expected to stay working fine. If there are any problems, or requests for additional tools and applications to be provided, just send us an email with your suggestions. The current list of packages that is (planned to become) available can be found here: https://wiki.centos.org/SpecialInterestGroup/Storage/Gluster/Ecosystem-pkgs We welcome all feedback, comments and contributions. You can get in touch with the CentOS Storage SIG on the centos-devel mailing list (https://lists.centos.org ) and with the Gluster developer and user communities at https://www.gluster.org/mailman/listinfo , we are also available on irc at #gluster on irc.freenode.net, and on twitter at @gluster . Cheers, Niels de Vos Storage SIG member & Gluster maintainer

1 0

Announcing the release of Gluster 4.1 on CentOS Linux 7 x86_64
by Niels de Vos 27 Jun '18

27 Jun '18

I am happy to announce the General Availability of Gluster 4.1 for CentOS 7 on x86_64. These packages are following the upstream Gluster Community releases, and will receive monthly bugfix updates. Gluster 4.1 is a Long-Term-Maintenance release, and will receive updates for approximately 18 months. The difference between Long-Term-Maintenance and Short-Term-Maintenance releases is explained on the Gluster release schedule page: https://www.gluster.org/community/release-schedule/ Users of CentOS 7 can now simply install Gluster 4.1 with only these two commands: # yum install centos-release-gluster # yum install glusterfs-server The centos-release-gluster package is delivered via CentOS Extras repos. This contains all the metadata and dependency information, needed to install Gluster 4.1. The actual package that will get installed is centos-release-gluster41. Users of the now End-Of-Life Short-Term-Maintenance Gluster 4.0 will automatically get the update to Gluster 4.1, whereas users of Gluster 3.12 can stay on that Long-Term-Maintenance release for an other six months. Users of Gluster 3.10 will need to manually upgrade by uninstalling the centos-release-gluster310 package, and replacing it with either the Gluster 4.1 or 3.12 version. Additional details about the upgrade process are linked in the announcement from the Gluster Community: https://lists.gluster.org/pipermail/announce/2018-June/000102.html We have a quickstart guide specifically built around the packages are available, it makes for a good introduction to Gluster and will help get you started in just a few simple steps, this quick start is available at https://wiki.centos.org/SpecialInterestGroup/Storage/gluster-Quickstart More details about the packages that the Gluster project provides in the Storage SIG is available in the documentation: https://wiki.centos.org/SpecialInterestGroup/Storage/Gluster The centos-release-gluster* repositories offer additional packages that enhance the usability of Gluster itself. Utilities and tools that were working with previous versions of Gluster are expected to stay working fine. If there are any problems, or requests for additional tools and applications to be provided, just send us an email with your suggestions. The current list of packages that is (planned to become) available can be found here: https://wiki.centos.org/SpecialInterestGroup/Storage/Gluster/Ecosystem-pkgs We welcome all feedback, comments and contributions. You can get in touch with the CentOS Storage SIG on the centos-devel mailing list (https://lists.centos.org ) and with the Gluster developer and user communities at https://www.gluster.org/mailman/listinfo , we are also available on irc at #gluster on irc.freenode.net, and on twitter at @gluster . Cheers, Niels de Vos Storage SIG member & Gluster maintainer

1 0

CESA-2018:1957 Important CentOS 7 git Security Update
by Johnny Hughes 22 Jun '18

22 Jun '18

CentOS Errata and Security Advisory 2018:1957 Important Upstream details at : https://access.redhat.com/errata/RHSA-2018:1957 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 167fd79268f2b8fdfa6ee58092dcaf8236ccca141d5f7eae97ecfeed7ecd7b43 emacs-git-1.8.3.1-14.el7_5.noarch.rpm 55b0c4b3ae8ec08ef3ffd76cd439c8c9c7a8b14f0b3f2ba360a1e92f308eab4c emacs-git-el-1.8.3.1-14.el7_5.noarch.rpm fd449c6043c02bc1b4f887c0a2a49a363876ff74dca584193d0e0b2d2f626ad7 git-1.8.3.1-14.el7_5.x86_64.rpm a5c0ae80f60567126c4b5a6064f35f47b204225b4af133b86e6d1f95670f936b git-all-1.8.3.1-14.el7_5.noarch.rpm be9132d10409efd7ab01d6be469d2a0adf43bfcadeb7f4baeeb4ca1d0b398153 git-bzr-1.8.3.1-14.el7_5.noarch.rpm 62869df37659056de226a727e39c68e970912b4234195426d4be81f237e8c401 git-cvs-1.8.3.1-14.el7_5.noarch.rpm 1bbfbc68feb28abb5287f446ec3e7793fed9d02ec82ce6b1988de6a545e916f8 git-daemon-1.8.3.1-14.el7_5.x86_64.rpm c47eb38ac2d722f42506456386fcce3e9189d393440915e51d89ff62550541db git-email-1.8.3.1-14.el7_5.noarch.rpm c5bbdb6ba3c98007b2499cac78be95477e7af8a973e806e485556af2149f9289 git-gui-1.8.3.1-14.el7_5.noarch.rpm b3ba3bf4e07d848ecd00f27fda64f5fa29ace32b7057f67508181abb540e3498 git-hg-1.8.3.1-14.el7_5.noarch.rpm 3827997cf98b18a3c8772971b0b2e1d95047ec05c463d714d2e54f7b43fa0176 gitk-1.8.3.1-14.el7_5.noarch.rpm 4b37b601b4d5ebdafd001bd2030245f31380941d782c8ede357a166ed82fc890 git-p4-1.8.3.1-14.el7_5.noarch.rpm 76c0b861bef3543ed2d9b9f9816036417432ab8310ff26ade51fd41d37f8e44a git-svn-1.8.3.1-14.el7_5.x86_64.rpm 65d06e031321d768b1cf6828d745621777a596e220cc15cc9078435ee10ba67a gitweb-1.8.3.1-14.el7_5.noarch.rpm b83ca338e62ff77dbc73e0f35f1501cc7164d936d1b54f47dbbbdc0626490bec perl-Git-1.8.3.1-14.el7_5.noarch.rpm b5875a3f8d0a8e228625d5c9f59cf8116ab5112fcdb58d9ef2957a2dbd6123ec perl-Git-SVN-1.8.3.1-14.el7_5.noarch.rpm Source: 2877d887cac48bd998e54341ed6534afb0508759cddc6bee1cac899b3a3173b1 git-1.8.3.1-14.el7_5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS

1 0

CESA-2018:1852 Moderate CentOS 7 kernel Security Update
by Johnny Hughes 16 Jun '18

16 Jun '18

CentOS Errata and Security Advisory 2018:1852 Moderate Upstream details at : https://access.redhat.com/errata/RHSA-2018:1852 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: ea66a974143f533fddeffe8f3f1cd32c86c4e3f253622959d0c10e6efb4ab3c3 kernel-3.10.0-862.3.3.el7.x86_64.rpm 64f2e56ed123e1a167d317e003e21c40d1dcfb48305ba3c6c78d07731dd16741 kernel-abi-whitelists-3.10.0-862.3.3.el7.noarch.rpm e3337bc41e6c09efbd66931c6247383f9cb6b771f1e22b91d54cd90372a50e15 kernel-debug-3.10.0-862.3.3.el7.x86_64.rpm 41d72ae15f786aebf0cd63bb30a70d876247fa22ea7d4577b847c8b83aef12b4 kernel-debug-devel-3.10.0-862.3.3.el7.x86_64.rpm 3f870fdf26b2e000a061d7dd31d7742ca36127e5f7db7b87556612e808e680ae kernel-devel-3.10.0-862.3.3.el7.x86_64.rpm d2ee86a99c5fae77d7984dd087502a636bd5115ed3b93e3166014a65466f07ed kernel-doc-3.10.0-862.3.3.el7.noarch.rpm be7972c92f9ef5bebc69912025e18090a7850c0d1f6186fdb28816c4d43f9ada kernel-headers-3.10.0-862.3.3.el7.x86_64.rpm fceece180472bab1d582834e2673711ad29406cf50fe42445ffebd07f1d0b677 kernel-tools-3.10.0-862.3.3.el7.x86_64.rpm 76f864788ce7c4debc1d9252e78051b6f4e0baeabb1fb582370dfcc878f1b9f6 kernel-tools-libs-3.10.0-862.3.3.el7.x86_64.rpm 329fc0513bebdccc20cf02d282ac006bee327bc0f57d0882b2c07ab4bbce6302 kernel-tools-libs-devel-3.10.0-862.3.3.el7.x86_64.rpm adb57998b2c5a06b88b6002c2bc9635173fd51aa6000ff4326e6a7a490cb8ea3 perf-3.10.0-862.3.3.el7.x86_64.rpm 47b576e251ed21a547132daa240adaa377b91859cc6f9545c5b4a2f74d8000aa python-perf-3.10.0-862.3.3.el7.x86_64.rpm Source: 0a17d9113e2ddbf3ca76d1e24591083acf5b898d42609f6db180263c7dbfd72d kernel-3.10.0-862.3.3.el7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS

1 0

CESA-2018:1836 Important CentOS 7 plexus-archiver Security Update
by Johnny Hughes 14 Jun '18

14 Jun '18

CentOS Errata and Security Advisory 2018:1836 Important Upstream details at : https://access.redhat.com/errata/RHSA-2018:1836 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 9c26560f7b175d6e1455a7b9edf9c56be74c06a98f91074a36c3944a51ea110e plexus-archiver-2.4.2-5.el7_5.noarch.rpm 098c29d9f8e0b7703e1ded196eaa5ec3cbc68521fb4a46c9563cba2a9ceb7649 plexus-archiver-javadoc-2.4.2-5.el7_5.noarch.rpm Source: 3efde77b61ff8ce194ff060488b029ffbf3d465c8b9192b227ba8e3923d2d9ff plexus-archiver-2.4.2-5.el7_5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS

1 0

CEBA-2018:1838 CentOS 7 linux-firmware BugFix Update
by Johnny Hughes 14 Jun '18

14 Jun '18

CentOS Errata and Bugfix Advisory 2018:1838 Upstream details at : https://access.redhat.com/errata/RHBA-2018:1838 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 940bc02535d7fd581dba6d53f939ed13dbf9a7cb78f23a22db0b94d6dbdbc980 iwl1000-firmware-39.31.5.1-62.2.el7_5.noarch.rpm 722a5873cbe15ee2c12aaac92f04ec012daca4b9d524037d358ebeeeb9e3f65b iwl100-firmware-39.31.5.1-62.2.el7_5.noarch.rpm 21a7b490b6736e116524cb3c6b676a8428323d6c90dee62694bb9b73cd86e1d9 iwl105-firmware-18.168.6.1-62.2.el7_5.noarch.rpm 0838322f12f12d545404810b33a006f7d9e981e1d9e758de14b7a8aadb143d4d iwl135-firmware-18.168.6.1-62.2.el7_5.noarch.rpm d0190f3079c3b729cefdb4fbdbfaea858778cce7d7214d636595657bdd4c43b4 iwl2000-firmware-18.168.6.1-62.2.el7_5.noarch.rpm c7a7cc8c5195e291ffc2ff8b647e642135f050611379e86c1d9c980439b80c67 iwl2030-firmware-18.168.6.1-62.2.el7_5.noarch.rpm a7f1d6426f6bd1440610f0b929971737c9fc24039bf88413cb43e21ad4ae1657 iwl3160-firmware-22.0.7.0-62.2.el7_5.noarch.rpm 12d43466da1c3c8055403ddcac8b4efba651ee35393fba897162cf86abcf0e0e iwl3945-firmware-15.32.2.9-62.2.el7_5.noarch.rpm 6fd48dfeef9416d6fa7636a89be2875c892335d89af6970b62aede43a8dc5e5c iwl4965-firmware-228.61.2.24-62.2.el7_5.noarch.rpm 5d5ff923fe6beb5904d43a5660b2f65d14a88fb5ae2f865ea10d2e17115a7360 iwl5000-firmware-8.83.5.1_1-62.2.el7_5.noarch.rpm 5ae3fa0eab138bb889e46725795724617047134f1c5c04113e6235c16761ee4c iwl5150-firmware-8.24.2.2-62.2.el7_5.noarch.rpm 8136f0d62b4419c840f101ca64c93e334ad6aa92e3e3d6fff37620069308f5b1 iwl6000-firmware-9.221.4.1-62.2.el7_5.noarch.rpm a0f96e3088e72ab8de9846ee75bc6460116b73b77db1bcdacde1a00dd1f7a076 iwl6000g2a-firmware-17.168.5.3-62.2.el7_5.noarch.rpm 5cbe19cd8a9be34c3ece1ea1ded527db0ccd5f8919c8a6b9ce29358b7dedc4ac iwl6000g2b-firmware-17.168.5.2-62.2.el7_5.noarch.rpm 8d7274ccd14611cb5214163c944b2834330984aa5906b68a49e28a8b82b8f7c1 iwl6050-firmware-41.28.5.1-62.2.el7_5.noarch.rpm 73ad0e98045b5da8a2600789197ec98c58ee605d83c3c24547bd8e498bdc9072 iwl7260-firmware-22.0.7.0-62.2.el7_5.noarch.rpm 03a7febf9a8380d07216ef53dd9d7ef78a684a61acc8006916d515d9cdb23583 iwl7265-firmware-22.0.7.0-62.2.el7_5.noarch.rpm b3eae0bc8cf3c427455ce5108efe07c3a76b7cdf8a3ad69342720b716b9ce864 linux-firmware-20180220-62.2.git6d51311.el7_5.noarch.rpm Source: b23b4d21947a38e5fb5353c3b49ee8d271cd779ad6ecb6509472c5bf345658e8 linux-firmware-20180220-62.2.git6d51311.el7_5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS

1 0

Announcing release of Varnish Cache 5 on CentOS 7 x86_64
by Jan Staněk 12 Jun '18

12 Jun '18

I am pleased to announce the immediate availability of Varnish Cache in version 5 on CentOS Linux 7 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps: # 1. Install a package with repository for your system # On CentOS, install package centos-release-scl available in CentOS repository: $ sudo yum install centos-release-scl-rh # 2. Install the collection: $ sudo yum install rh-varnish5 # 3. Start using software collections: $ scl enable rh-varnish5 bash At this point you should be able to use varnish just as a normal application. Some usage examples follow: $ systemctl start rh-varnish5-varnish $ varnishtop This collections is CentOS-based rebuild built by SCLo SIG community, and the packages have been available in Red Hat Software Collections 3.1 for RHEL: https://access.redhat.com/documentation/en-us/red_hat_software_collections/… So, for RHEL-based builds, follow the steps in the documentation above. About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the collection NodeJS being released here, we also build and deliver databases, web servers, and language stacks including multiple versions of PostgreSQL, MariaDB, Apache HTTP Server, Python, Ruby, Ruby on Rails and others. You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes how to get involved and help with the effort. Enjoy! -- Jan Staněk Associate Software Engineer, Brno Red Hat Czech jstanek(a)redhat.com IM: jstanek

1 0

Announcing release of Ruby 2.5 on CentOS 7 x86_64
by Jan Staněk 12 Jun '18

12 Jun '18

I am pleased to announce the immediate availability of Ruby in version 2.5 on CentOS Linux 7 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps: # 1. Install a package with repository for your system: # On CentOS, install package centos-release-scl available in CentOS repository: $ sudo yum install centos-release-scl # On RHEL, enable RHSCL repository for you system: $ sudo yum-config-manager --enable rhel-server-rhscl-7-rpms # 2. Install the collection: $ sudo yum install rh-ruby25 # 3. Start using software collections: $ scl enable rh-ruby25 bash The last command runs the Bash shell in the environment with rh-ruby25 Software Collection enabled, which means that at this point you are able to use ruby just as a normal application. Some examples of available commands follow: $ ruby my-app.rb $ gem install activeresource $ bundle $ irb This collections is CentOS-based rebuild built by SCLo SIG community, and the packages have been available in Red Hat Software Collections 3.1 for RHEL: https://access.redhat.com/documentation/en-us/red_hat_software_collections/… So, for RHEL-based builds, follow the steps in the documentation above. About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the collection NodeJS being released here, we also build and deliver databases, web servers, and language stacks including multiple versions of PostgreSQL, MariaDB, Apache HTTP Server, Python, Ruby, Ruby on Rails and others. You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes how to get involved and help with the effort. Enjoy! -- Jan Staněk Associate Software Engineer, Brno Red Hat Czech jstanek(a)redhat.com IM: jstanek

1 0

Announcing release of PostgreSQL 10.0 on CentOS 7 x86_64
by Jan Staněk 12 Jun '18

12 Jun '18

I am pleased to announce the immediate availability of PostgreSQL in version 10.0 on CentOS Linux 7 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps: # 1. Install a package with repository for your system: # On CentOS, install package centos-release-scl available in CentOS repository: $ sudo yum install centos-release-scl # On RHEL, enable RHSCL repository for you system: $ sudo yum-config-manager --enable rhel-server-rhscl-7-rpms # 2. Install the collection: $ sudo yum install rh-postgresql10 # 3. Start using software collections: $ scl enable rh-postgresql10 bash At this point you should be able to use PostgreSQL just as a normal application. Here are some examples of commands you can run: $ postgresql-setup --initdb $ service rh-postgresql10-postgresql start $ psql This collections is CentOS-based rebuild built by SCLo SIG community, and the packages have been available in Red Hat Software Collections 3.1 for RHEL: https://access.redhat.com/documentation/en-us/red_hat_software_collections/… So, for RHEL-based builds, follow the steps in the documentation above. About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the collection NodeJS being released here, we also build and deliver databases, web servers, and language stacks including multiple versions of PostgreSQL, MariaDB, Apache HTTP Server, Python, Ruby, Ruby on Rails and others. You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes how to get involved and help with the effort. Enjoy! -- Jan Staněk Associate Software Engineer, Brno Red Hat Czech jstanek(a)redhat.com IM: jstanek

1 0

Announcing release of Perl 5.26 on CentOS 7 x86_64
by Jan Staněk 12 Jun '18

12 Jun '18

I am pleased to announce the immediate availability of Perl in version 5.26 on CentOS Linux 7 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps: # 1. Install a package with repository for your system: # On CentOS, install package centos-release-scl available in CentOS repository: $ sudo yum install centos-release-scl # On RHEL, enable RHSCL repository for you system: $ sudo yum-config-manager --enable rhel-server-rhscl-7-rpms # 2. Install the collection: $ sudo yum install rh-perl526 # 3. Start using the software collection: $ scl enable rh-perl526 bash At this point you should be able to use perl just as a normal application. Some examples of new available commands follow: $ perl my-app.pl $ sudo yum install rh-perl526-perl-CPAN make $ sudo cpan App::cpanminus $ sudo cpanm -n Furl This collections is CentOS-based rebuild built by SCLo SIG community, and the packages have been available in Red Hat Software Collections 3.1 for RHEL: https://access.redhat.com/documentation/en-us/red_hat_software_collections/… So, for RHEL-based builds, follow the steps in the documentation above. About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the collection NodeJS being released here, we also build and deliver databases, web servers, and language stacks including multiple versions of PostgreSQL, MariaDB, Apache HTTP Server, Python, Ruby, Ruby on Rails and others. You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes how to get involved and help with the effort. Enjoy! -- Jan Staněk Associate Software Engineer, Brno Red Hat Czech jstanek(a)redhat.com IM: jstanek

1 0

Announcing release of MongoDB 3.6 on CentOS 7 x86_64
by Jan Staněk 12 Jun '18

12 Jun '18

I am pleased to announce the immediate availability of MongoDB in version 3.6 on CentOS Linux 7 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps: # 1. Install a package with repository for your system: # On CentOS, install package centos-release-scl available in CentOS repository: $ sudo yum install centos-release-scl # On RHEL, enable RHSCL repository for you system: $ sudo yum-config-manager --enable rhel-server-rhscl-7-rpms # 2. Install the collection: $ sudo yum install rh-mongodb36 # 3. Start using software collections: $ scl enable rh-mongodb36 bash At this point you should be able to use MongoDB just as a normal application. Some examples of usage follows: $ service rh-mongodb36-mongod start $ mongo This collections is CentOS-based rebuild built by SCLo SIG community, and the packages have been available in Red Hat Software Collections 3.1 for RHEL: https://access.redhat.com/documentation/en-us/red_hat_software_collections/… So, for RHEL-based builds, follow the steps in the documentation above. About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the collection NodeJS being released here, we also build and deliver databases, web servers, and language stacks including multiple versions of PostgreSQL, MariaDB, Apache HTTP Server, Python, Ruby, Ruby on Rails and others. You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes how to get involved and help with the effort. Enjoy! -- Jan Staněk Associate Software Engineer, Brno Red Hat Czech jstanek(a)redhat.com IM: jstanek

1 0

Announcing release of HAProxy 1.8 on CentOS 7 x86_64
by Jan Staněk 12 Jun '18

12 Jun '18

I am pleased to announce the immediate availability of HAProxy in version 1.8 on CentOS Linux 7 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps: # 1. Install a package with repository for your system: # On CentOS, install package centos-release-scl available in CentOS repository: $ sudo yum install centos-release-scl # On RHEL, enable RHSCL repository for you system: $ sudo yum-config-manager --enable rhel-server-rhscl-7-rpms # 2. Install the collection: $ sudo yum install rh-haproxy18 # 3. Start using software collections: $ scl enable rh-haproxy18 bash At this point you should be able to use varnish just as a normal application. Some usage examples follow: $ systemctl start rh-haproxy18-haproxy This collections is CentOS-based rebuild built by SCLo SIG community, and the packages have been available in Red Hat Software Collections 3.1 for RHEL: https://access.redhat.com/documentation/en-us/red_hat_software_collections/… So, for RHEL-based builds, follow the steps in the documentation above. About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the collection NodeJS being released here, we also build and deliver databases, web servers, and language stacks including multiple versions of PostgreSQL, MariaDB, Apache HTTP Server, Python, Ruby, Ruby on Rails and others. You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes how to get involved and help with the effort. Enjoy! -- Jan Staněk Associate Software Engineer, Brno Red Hat Czech jstanek(a)redhat.com IM: jstanek

1 0

CESA-2018:1780 Important CentOS 7 xmlrpc Security Update
by Johnny Hughes 01 Jun '18

01 Jun '18

CentOS Errata and Security Advisory 2018:1780 Important Upstream details at : https://access.redhat.com/errata/RHSA-2018:1780 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 2bad0902c6d8582ef5bb5758c6860951f34cb646b69eda066162ed5cb83aa500 xmlrpc-client-3.1.3-9.el7_5.noarch.rpm a47c496fc4e85d23172c9fb69e236caecfd9aa8e813ff15eeab908309b203a4f xmlrpc-common-3.1.3-9.el7_5.noarch.rpm 4b0992a8b0e3c18327635bfe9a1a6f4e946eeb8c9db62aacaf16e728ae061390 xmlrpc-javadoc-3.1.3-9.el7_5.noarch.rpm ac336edfd9e783d9a98e89d517a049e98e6bacfbc4a6564d44c1778aa6b27b69 xmlrpc-server-3.1.3-9.el7_5.noarch.rpm Source: 6e330c0f41b9a2eb2b51a7de6242c122be29713ee6e9356fe739dbc52225ea84 xmlrpc-3.1.3-9.el7_5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS

1 0

CEEA-2018:1771 CentOS 7 linux-firmware Enhancement Update
by Johnny Hughes 01 Jun '18

01 Jun '18

CentOS Errata and Enhancement Advisory 2018:1771 Upstream details at : https://access.redhat.com/errata/RHEA-2018:1771 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: c81d039ccae2e6d9a5f8c1f63e99c0a611d489b49da73093341625ce7203fffd iwl1000-firmware-39.31.5.1-62.1.el7_5.noarch.rpm b16d77402aaaeaab2cd27bb3c702209459aa5920bbe530687ce8867521cca73e iwl100-firmware-39.31.5.1-62.1.el7_5.noarch.rpm f4c316d5b6277e5f80544ed82ece1c3c4194b3bf7074bcb046215cd2a3de80c9 iwl105-firmware-18.168.6.1-62.1.el7_5.noarch.rpm 85a977ba7de5d5a55865790deae6c0975e2a61ae73e5a976bdc5a6f28a3612dd iwl135-firmware-18.168.6.1-62.1.el7_5.noarch.rpm 85cd4cc32e5b47cb6d04a98b03f7cf53d00a41ed0054ea7eb3147f3b7ffac8da iwl2000-firmware-18.168.6.1-62.1.el7_5.noarch.rpm d347fb597ac149b5910a60b0e0f1d5a81766b639b783d8cb4e64233b63c2805c iwl2030-firmware-18.168.6.1-62.1.el7_5.noarch.rpm 270d1efa9566b37a6516957d18bcb68dbe50b261751e8f8772a4c46e62c2c152 iwl3160-firmware-22.0.7.0-62.1.el7_5.noarch.rpm c62436867e8b4fa0afa2854582c1e2ede38a25aa5c8aee63c295fb552d578d5c iwl3945-firmware-15.32.2.9-62.1.el7_5.noarch.rpm 8ae9e3a5bba2fe05c26f78cb7895fc9867d004e4147143073415bd6273bd21c3 iwl4965-firmware-228.61.2.24-62.1.el7_5.noarch.rpm c0dd3fd97833e11345b55a973f80e575c1f2f7ac34fe5b5b64925b9d2d52c652 iwl5000-firmware-8.83.5.1_1-62.1.el7_5.noarch.rpm f2f59820717d84bb272dd15ac691ae57e68a6795a971780e909860825ff5b026 iwl5150-firmware-8.24.2.2-62.1.el7_5.noarch.rpm 37333c605fd80feb72d7c64febce6aa3b60b04ca6834e67a9a4a67dd1b3e0bb0 iwl6000-firmware-9.221.4.1-62.1.el7_5.noarch.rpm 7520a3f8c51170c529bd78d0cbf39c396c1c547c206d437e9c219d34d857025d iwl6000g2a-firmware-17.168.5.3-62.1.el7_5.noarch.rpm 684282a662b33d35df0b41b2329058cad0ddc5ccbd23a904cdc47208b799714e iwl6000g2b-firmware-17.168.5.2-62.1.el7_5.noarch.rpm 9106613c00bf499321524b3095bc39106ada16f2c5c8aea7a7732ff348ae1898 iwl6050-firmware-41.28.5.1-62.1.el7_5.noarch.rpm 0c71a1311ca386916843bf4f04ba9d88bec808c810ed865a48da1b916e4d2f00 iwl7260-firmware-22.0.7.0-62.1.el7_5.noarch.rpm 9b64e88b312f001e47381e9204304611ecc08e0d1d0b83c085f1d0781a6e2af6 iwl7265-firmware-22.0.7.0-62.1.el7_5.noarch.rpm f5a93f4034dc89919815bca0c650b77ff4495a9782e7544e30064ab888caae97 linux-firmware-20180220-62.1.git6d51311.el7_5.noarch.rpm Source: 2c23b4eeb2b19505867bd7786a8cb7da21d7ecd11d3a19f9de4d3e693196fcae linux-firmware-20180220-62.1.git6d51311.el7_5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS

1 0

CESA-2018:1779 Important CentOS 6 xmlrpc3 Security Update
by Johnny Hughes 01 Jun '18

01 Jun '18

CentOS Errata and Security Advisory 2018:1779 Important Upstream details at : https://access.redhat.com/errata/RHSA-2018:1779 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 8a63dd898f19ba28ff553e34cf7e3d22690e5ad769a58ba314c29382c3dddba8 xmlrpc3-client-3.0-4.17.el6_9.noarch.rpm 6bea1a7d98cccdf32c2f75de45b6a7346a6ba76381e4a13aa885a9081412fc94 xmlrpc3-client-devel-3.0-4.17.el6_9.noarch.rpm 12fa409cb17f876d5e7687d362554a64446f22731ca89d179b8a7a6b76964c2c xmlrpc3-common-3.0-4.17.el6_9.noarch.rpm d84de1c265757099ef0fcec691095f17af2c781275baf4e4cc6cc295e3e4d9cb xmlrpc3-common-devel-3.0-4.17.el6_9.noarch.rpm 1643cc58264f9a50ef79a11961d77e6c15733272db2fdca5326339f68b20a06d xmlrpc3-javadoc-3.0-4.17.el6_9.noarch.rpm 8a109d1ed6d4a054b8efbed1d25b6740d5316ab0d8407fe8fec715327f4bf26d xmlrpc3-server-3.0-4.17.el6_9.noarch.rpm d32170144a993875542024297d967cbdcbfc5348ba9e698eb86ec57ef0178d66 xmlrpc3-server-devel-3.0-4.17.el6_9.noarch.rpm x86_64: 8a63dd898f19ba28ff553e34cf7e3d22690e5ad769a58ba314c29382c3dddba8 xmlrpc3-client-3.0-4.17.el6_9.noarch.rpm 6bea1a7d98cccdf32c2f75de45b6a7346a6ba76381e4a13aa885a9081412fc94 xmlrpc3-client-devel-3.0-4.17.el6_9.noarch.rpm 12fa409cb17f876d5e7687d362554a64446f22731ca89d179b8a7a6b76964c2c xmlrpc3-common-3.0-4.17.el6_9.noarch.rpm d84de1c265757099ef0fcec691095f17af2c781275baf4e4cc6cc295e3e4d9cb xmlrpc3-common-devel-3.0-4.17.el6_9.noarch.rpm 1643cc58264f9a50ef79a11961d77e6c15733272db2fdca5326339f68b20a06d xmlrpc3-javadoc-3.0-4.17.el6_9.noarch.rpm 8a109d1ed6d4a054b8efbed1d25b6740d5316ab0d8407fe8fec715327f4bf26d xmlrpc3-server-3.0-4.17.el6_9.noarch.rpm d32170144a993875542024297d967cbdcbfc5348ba9e698eb86ec57ef0178d66 xmlrpc3-server-devel-3.0-4.17.el6_9.noarch.rpm Source: 3ffd2f90bf7ddd055de393d3344152cc0fbde63a3298cbb12a7de3e7067f895c xmlrpc3-3.0-4.17.el6_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS

1 0

CESA-2018:1777 Important CentOS 6 procps Security Update
by Johnny Hughes 01 Jun '18

01 Jun '18

CentOS Errata and Security Advisory 2018:1777 Important Upstream details at : https://access.redhat.com/errata/RHSA-2018:1777 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 5088ad1f19a26726e8847982bdca51ff071b8bf9d48202f26a713052c2527785 procps-3.2.8-45.el6_9.3.i686.rpm dd01689106c323bea94b4f56f3416482629dd2ce6137921f13258e102ef960f0 procps-devel-3.2.8-45.el6_9.3.i686.rpm x86_64: 5088ad1f19a26726e8847982bdca51ff071b8bf9d48202f26a713052c2527785 procps-3.2.8-45.el6_9.3.i686.rpm ba2b604c6da10bf7d2df547760c5db6f91bef6644716c3cd708597c0a80d2179 procps-3.2.8-45.el6_9.3.x86_64.rpm dd01689106c323bea94b4f56f3416482629dd2ce6137921f13258e102ef960f0 procps-devel-3.2.8-45.el6_9.3.i686.rpm 9310f7af0fd82d64736c7b837a5ed4776418c2c45bd74e1d8df540f3916b2dfc procps-devel-3.2.8-45.el6_9.3.x86_64.rpm Source: 828effa30b5895235b5db5f2fce5c8f56525e3dbc31d49e90a12741ffc4480de procps-3.2.8-45.el6_9.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS

1 0

CEEA-2018:1774 CentOS 6 microcode_ctl Enhancement Update
by Johnny Hughes 01 Jun '18

01 Jun '18

CentOS Errata and Enhancement Advisory 2018:1774 Upstream details at : https://access.redhat.com/errata/RHEA-2018:1774 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: e931f163e9536a55e4ce801be0a99e186664f8133888edaf7ade5846824f4422 microcode_ctl-1.17-25.7.el6_9.i686.rpm x86_64: c458d93f0a6aab4ab68c11304c8c3d5dd9972bf97d497539e2459a0cca9aed0f microcode_ctl-1.17-25.7.el6_9.x86_64.rpm Source: 55c74ae1211a4790d87dcd9b4b363bd5e1c09e5cb81b4d17bfef5c9dcf7faa20 microcode_ctl-1.17-25.7.el6_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

announce June 2018