I've tried booting on 4.2.0-0:

Boot get a long time on "Mounted Configuration File System", before get like Robert:

[  OK  ] Mounted Configuration File System.
Gdracut-initqueue[229]: Warning: Could not boot.
dracut-initqueue[229]: Warning: /dev/disk/by-uuid/d1f4324e-0b95-412b-8e6e-797cc49c974a does not exist
         Starting Dracut Emergency Shell...
Warning: /dev/disk/by-uuid/d1f4324e-0b95-412b-8e6e-797cc49c974a does not exist

Generating "/run/initramfs/rdsosreport.txt"

and going to dracut. Initramfs should be wrong, probably following error during yum update.

I also have this before the boot menu:
Ignoring unknown command: ui
Ignoring malformed menu command:  autoboot
Ignoring unknown command: totaltimeout

Following options:
ui menu.c32
menu autoboot centos
menu title centos Options
#menu hidden
timeout 60
totaltimeout 600

On the top of extlinux.conf file. But during boot bananapi still autoboot on first choice after 5 sec.
Did you have same error on cubieboard Robert?


Le 23/08/2015 18:53, Robert Moskowitz a écrit :


On 08/23/2015 12:41 PM, Nicolas wrote:
Hello

Yes I know for ntp, I just think maybe on the howto page for people we can tell user to do it, if it will not be on the image by default.

I am ASSuMEing that at by beta, this will be part of the minimal image.  So for now, we just have to do it ourselves.


For kernel, that's exact we got the same error. I will try your steps and add the kernel in extlinux.conf asap and tell you.


Le 23/08/2015 15:21, Robert Moskowitz a écrit :


On 08/23/2015 08:48 AM, Nicolas wrote:
Hello

I made some others tests for Bananapi and Centos image.

Image generated with rbf is 4.3GB. I think we should shrink it to 4GB to allow people use 4GB cards.

Maybe on a howto we can tell users to do :
- install ntp (no clock on bananapi)

yum install ntp chrony

I think is what you need.

And to set your time zone use the timedatectl command.

- enable led activity
    - /sys/class/leds/bananapi\:green\:usr/trigger with on the following option :
    [none] usb-gadget usb-host cpu0 cpu1 mmc0
    mmc0 is a good choice.
- make eth0 dhcp by default

I did a yum update,

 kernel armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1                          60 k
 kernel-core armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1                          17 M
 kernel-modules armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1                          11 M
Updating:
 avahi armv7hl 0.6.31-14.el7 c7pass1 245 k
 avahi-autoipd armv7hl 0.6.31-14.el7 c7pass1                          38 k
 avahi-libs armv7hl 0.6.31-14.el7 c7pass1 54 k
 kernel-tools armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1                         110 k
 kernel-tools-libs armv7hl 4.2.0-0.rc2.git0.1.centos.el7 c7pass1                          65 k

But I got the error :

/usr/lib/kernel/install.d/51-dracut-rescue.install: line 59: /boot/loader/entries/5f978b1f46204461b2d19e876ea201d6-0-rescue.conf: No such file or directory
warning: %posttrans(kernel-core-4.2.0-0.rc2.git0.1.centos.el7.armv7hl) scriptlet failed, exit status 1
Non-fatal POSTTRANS scriptlet failure in rpm package kernel-core-4.2.0-0.rc2.git0.1.centos.el7.armv7hl

after reboot I'm still in 4.0.0-1.el7.armv7hl.

Did someone want I try something on this image on bananapi?

See my messages on the same problem on my Cubietruck and Mandar's help in fixing this.  I THINK yours is very similar to mine.


_______________________________________________
Arm-dev mailing list
Arm-dev@centos.org
http://lists.centos.org/mailman/listinfo/arm-dev
_______________________________________________
Arm-dev mailing list
Arm-dev@centos.org
http://lists.centos.org/mailman/listinfo/arm-dev


_______________________________________________
Arm-dev mailing list
Arm-dev@centos.org
http://lists.centos.org/mailman/listinfo/arm-dev