On 12/6/18 11:22 AM, Robert Moskowitz wrote:
Pablo,

I have been busy on the Fedora-arm list getting F29 working on the Odroid-HC1.  I figured if I could get F29 working, I could port that knowledge over to Centos-arm.  More on what I accomplished later...

I grabbed this image, dropped it on a uSD, did the various needed steps and tried to boot.  It failed because there is nothing really in /boot!

==============

BTW, an mostly empty /boot is the same problem I was up against with F30 rawhide RC5 minimal.  RC5 Server had the files, but has an SELinux bug, so I fell back to working with F29.



U-Boot 2018.09 (Sep 11 2018 - 09:51:41 +0000) for ODROID-XU3/XU4/HC1

CPU:   Exynos5422 @ 800 MHz
Model: Odroid XU3 based on EXYNOS5422
Board: Odroid XU3 based on EXYNOS5422
Type:  hc1
DRAM:  2 GiB
MMC:   EXYNOS DWMMC: 0, EXYNOS DWMMC: 2
Loading Environment from MMC... Card did not respond to voltage select!
*** Warning - No block device, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
Hit any key to stop autoboot:  0
MMC Device 1 not found
no mmc device at slot 1
Card did not respond to voltage select!
switch to partitions #0, OK
mmc2 is current device
Scanning mmc 2:2...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
685 bytes read in 4 ms (167 KiB/s)
Ignoring unknown command: ui
Ignoring malformed menu command:  autoboot
Ignoring malformed menu command:  hidden
Ignoring unknown command: totaltimeout
CentOS-Userland-7-armv7hl-generic-Minimal-419-1810 Boot Options.
1:    CentOS-Userland-7-armv7hl-generic-Minimal-419-1810 (4.19.5-300.el7.armv7
hl)
Enter choice: 1:    CentOS-Userland-7-armv7hl-generic-Minimal-419-1810 (4.19
.5-300.el7.armv7hl)
Retrieving file: /initrd-4.19.5-300.el7.armv7hl.img
** File not found /initrd-4.19.5-300.el7.armv7hl.img **
Skipping CentOS-Userland-7-armv7hl-generic-Minimal-419-1810 (4.19.5-300.el7.armv
7hl) for failure retrieving initrd
SCRIPT FAILED: continuing...
starting USB...
USB0:   USB EHCI 1.00
USB1:   Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00

======================

no initrd for starters...

Bob

On 12/3/18 5:45 AM, Pablo Sebastián Greco wrote:

Robert, I didn't want to send this to the list, but the image that will appear on the mirrors are temporarily hosted here https://armv7.dev.centos.org/repos/images/.

You'll see that there is a generic-419, it is a test image I built (never had time to test myself), that comes with kernel 4.19 instead of 4.14, so it can be used with newer devices.

Let me know how it goes..... :)

Pablo.

El 2/12/18 a las 22:59, Robert Moskowitz escribió:
The power supply and serial connection came today, so now to build my first image.

I see that we are still on the 1804 images, and seem to recall that there was work to do to get that working.

Can someone give me the current recommended installation steps?

I would prefer that all partitions are on the sata drive, only uboot on the uSD.

thanks.

_______________________________________________
Arm-dev mailing list
Arm-dev@centos.org
https://lists.centos.org/mailman/listinfo/arm-dev 


_______________________________________________
Arm-dev mailing list
Arm-dev@centos.org
https://lists.centos.org/mailman/listinfo/arm-dev