I can upload my latest src rpm , if you like . Also my rpmbuild command is :

 rpmbuild -ba --target armv7hl --without=perf --without=debuginfo --without=pae --define="_arch arm" --define="_build_arch arm" kernel.spec

it is very specific , I have not tried to build anything else .



On 21/06/16 22:12, Johnny Hughes wrote:
On 06/21/2016 06:04 AM, mo.ucina wrote:

Hello Johnny,

The patch comes mostly from sources at OpenWrt , also from Denx.de . The
license is GPL . Those two configs are very important they enable the
switch and switch leds . There are several files dedicated to the switch
portion .

Your patchlog should look like this :

patching file arch/arm/boot/dts/Makefile
patching file arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
patching file drivers/net/phy/b53/b53_common.c
patching file drivers/net/phy/b53/b53_mdio.c
patching file drivers/net/phy/b53/b53_mmap.c
patching file drivers/net/phy/b53/b53_phy_fixup.c
patching file drivers/net/phy/b53/b53_priv.h
patching file drivers/net/phy/b53/b53_regs.h
patching file drivers/net/phy/b53/b53_spi.c
patching file drivers/net/phy/b53/b53_srab.c
patching file drivers/net/phy/b53/Kconfig
patching file drivers/net/phy/b53/Makefil
patching file drivers/net/phy/Kconfig
patching file drivers/net/phy/Makefile
patching file drivers/net/phy/swconfig.c
patching file drivers/net/phy/swconfig_leds.c
patching file include/linux/platform_data/b53.h
patching file include/linux/switch.h
patching file include/uapi/linux/Kbuild
patching file include/uapi/linux/switch.h

I can apply the patch, but two things happen.

First, it impacts more than just armv7hl (it also effects all the other
arches and I use this same file for all arches)

Second, it fails during the build on both armv7hl and i686 after install
of the patch, though I will try again later this week.






_______________________________________________
Arm-dev mailing list
Arm-dev@centos.org
https://lists.centos.org/mailman/listinfo/arm-dev