Hello Johhny,

The patch comes mostly from sources at OpenWrt , also from Denx.de . The license is GPL . Those two configs are very important they enable the switch and switch leds . There are several files dedicated to the switch portion .

Your patchlog should look like this :

patching file arch/arm/boot/dts/Makefile
patching file arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
patching file drivers/net/phy/b53/b53_common.c
patching file drivers/net/phy/b53/b53_mdio.c
patching file drivers/net/phy/b53/b53_mmap.c
patching file drivers/net/phy/b53/b53_phy_fixup.c
patching file drivers/net/phy/b53/b53_priv.h
patching file drivers/net/phy/b53/b53_regs.h
patching file drivers/net/phy/b53/b53_spi.c
patching file drivers/net/phy/b53/b53_srab.c
patching file drivers/net/phy/b53/Kconfig
patching file drivers/net/phy/b53/Makefile
patching file drivers/net/phy/Kconfig
patching file drivers/net/phy/Makefile
patching file drivers/net/phy/swconfig.c
patching file drivers/net/phy/swconfig_leds.c
patching file include/linux/platform_data/b53.h
patching file include/linux/switch.h
patching file include/uapi/linux/Kbuild
patching file include/uapi/linux/switch.h

Regards

Milorad


On 15/06/16 03:34, Johnny Hughes wrote:
On 06/12/2016 11:06 PM, mo.ucina wrote:

This would be the needed addition to config :

CONFIG_B53=y
CONFIG_B53_SPI_DRIVER=y
CONFIG_B53_PHY_DRIVER=y
CONFIG_B53_SRAB_DRIVER=y
CONFIG_B53_PHY_FIXUP=y
CONFIG_SWCONFIG=y
CONFIG_SWCONFIG_LEDS=y


On 13/06/16 13:59, mo.ucina wrote:

Hello Johnny

Would you be interested in adding in the
'linux-4.4.2-1.fc21.armv7hl.LR1' patch to your build which has the
driver for the Bananapi R1 onboard switch (b53) . So far I have been
adding this patch to the Fedora src rpm , and re-compiling the kernel
every time .  I would save a bit of work . I will attach the patch
here . As far as the other steps you mentioned , I have been doing
exactly that for the past few months .

Regards
Milorad

_______________________________________________
Arm-dev mailing list
Arm-dev@centos.org
https://lists.centos.org/mailman/listinfo/arm-dev


I was able to apply your patch .. however, these do net seem present:

CONFIG_SWCONFIG=y
CONFIG_SWCONFIG_LEDS=y

I will double check my work, but should those two be needed in the
config once the patch applies or is something else needed?




_______________________________________________
Arm-dev mailing list
Arm-dev@centos.org
https://lists.centos.org/mailman/listinfo/arm-dev