Hallo,
gibt es ein CentOS-User bei dem die:
http://crrcsim.berlios.de/wiki/index.php?n=CRRCsim.HomePage
ohne ruckeln läuft?
Yup loift!
Gruß Timo
Hallo Timo,
welche Hardware setzt Du ein?
Meine Hardware:
# lspci 00:00.0 Host bridge: Intel Corporation 82X38/X48 Express DRAM Controller (rev 01) 00:01.0 PCI bridge: Intel Corporation 82X38/X48 Express Host-Primary PCI Express Bridge (rev 01) 00:06.0 PCI bridge: Intel Corporation 82X38/X48 Express Host-Secondary PCI Express Bridge (rev 01) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 02) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8500 GT] (rev a1) 04:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02)
Cpu(s): 1.4%us, 0.2%sy, 0.0%ni, 98.4%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 4150944k total, 669164k used, 3481780k free, 24468k buffers Swap: 4200988k total, 0k used, 4200988k free, 353592k cached
processor : 0-3 ( 4Kerne ) vendor_id : GenuineIntel cpu family : 6 model : 23 model name : 06/17 stepping : 10 cpu MHz : 2833.137 cache size : 6144 KB physical id : 0 siblings : 4 core id : 1 cpu cores : 4 apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni tm2 ssse3 lahf_lm bogomips : 5665.97
# uname -a Linux quad.schule.local 2.6.18-194.32.1.el5PAE #1 SMP Wed Jan 5 18:43:13 EST 2011 i686 i686 i386 GNU/Linux
Evtl. liegt es daran, daß ich kein Grafiktreiber installiert habe? (früher musste man noch den Nvidia-Treiber im Runlevel 3 installieren)
# Xorg configuration created by pyxf86config
Section "ServerLayout" Identifier "Default Layout" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" EndSection
Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "de" Option "XkbVariant" "nodeadkeys" EndSection
Section "Device" Identifier "Videocard0" Driver "nv" EndSection
Section "Screen" Identifier "Screen0" Device "Videocard0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection
Hast Du evtl. ein fertiges RPM-Packet für mich, weil ich evtl. die Kompilierung falsch durchgeführt habe?
Danke schon mal und Gruss Wolfgang