Hola.
Tengo el siguiente problema.
Un maquina con CentOS 5.4 (Final) y tiene RAID 1 por hardware, este
equipo esta dejando el siguiente registro en el "/var/log/messages"
corresponde a un error de disco, pero no se porque, o como solucionarlo.
Oct 27 15:41:16 localhost kernel: ata4.00: qc timeout (cmd 0xa0)
Oct 27 15:41:16 localhost kernel: ata4.00: exception Emask 0x0 SAct 0x0 SErr
0x0 action 0x6 frozen
Oct 27 15:41:16 localhost kernel: ata4.00: irq_stat 0x40000001
Oct 27 15:41:16 localhost kernel: ata4.00: cmd
a0/00:00:00:0c:00/00:00:00:00:00/a0 tag 0 pio 12 in
Oct 27 15:41:16 localhost kernel: cdb 43 00 00 00 00 00 00 00 0c
00 00 00 00 00 00 00
Oct 27 15:41:16 localhost kernel: res
51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
Oct 27 15:41:16 localhost kernel: ata4.00: status: { DRDY ERR }
Oct 27 15:41:16 localhost kernel: ata4: hard resetting link
Oct 27 15:41:17 localhost kernel: ata4: SATA link up 1.5 Gbps (SStatus 113
SControl 300)
Oct 27 15:41:17 localhost kernel: ata4.00: configured for UDMA/33
Oct 27 15:41:17 localhost kernel: ata4: EH complete
Este error esta sucediendo con frecuencia (cada 30 min. aporx.) supongo que
debe ocurrir por algun tipo de lectura/escritura en uno de los discos
En el arranque se encuentra el siguiente registro en "/var/log/messages":
Oct 27 15:27:09 localhost kernel: scsi0 : ahci
Oct 27 15:27:09 localhost kernel: scsi1 : ahci
Oct 27 15:27:09 localhost kernel: scsi2 : ahci
Oct 27 15:27:09 localhost kernel: scsi3 : ahci
Oct 27 15:27:09 localhost kernel: scsi4 : ahci
Oct 27 15:27:09 localhost kernel: scsi5 : ahci
Oct 27 15:27:09 localhost kernel: ata1: SATA max UDMA/133 abar
m2048@0xf9ffe000 port 0xf9ffe100 irq 74
Oct 27 15:27:09 localhost kernel: ata2: SATA max UDMA/133 abar
m2048@0xf9ffe000 port 0xf9ffe180 irq 74
Oct 27 15:27:09 localhost kernel: ata3: SATA max UDMA/133 abar
m2048@0xf9ffe000 port 0xf9ffe200 irq 74
*Oct 27 15:27:09 localhost kernel: ata4: SATA max UDMA/133 abar
m2048@0xf9ffe000 port 0xf9ffe280 irq 74*
Oct 27 15:27:09 localhost kernel: ata5: SATA max UDMA/133 abar
m2048@0xf9ffe000 port 0xf9ffe300 irq 74
Oct 27 15:27:09 localhost kernel: ata6: SATA max UDMA/133 abar
m2048@0xf9ffe000 port 0xf9ffe380 irq 74
Oct 27 15:27:09 localhost kernel: ata1: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
Oct 27 15:27:09 localhost kernel: ata1.00: ATA-7: WDC WD7500AAKS-00RBA0,
30.04G30, max UDMA/133
Oct 27 15:27:09 localhost kernel: ata1.00: 1465149168 sectors, multi 0:
LBA48 NCQ (depth 31/32)
Oct 27 15:27:09 localhost kernel: ata1.00: configured for UDMA/133
Oct 27 15:27:09 localhost kernel: ata2: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
Oct 27 15:27:09 localhost kernel: ata2.00: ATA-7: WDC WD7500AAKS-00RBA0,
30.04G30, max UDMA/133
Oct 27 15:27:09 localhost kernel: ata2.00: 1465149168 sectors, multi 0:
LBA48 NCQ (depth 31/32)
Oct 27 15:27:09 localhost kernel: ata2.00: configured for UDMA/133
Oct 27 15:27:09 localhost kernel: ata3: SATA link down (SStatus 0 SControl
300)
*Oct 27 15:27:09 localhost kernel: ata4: SATA link up 1.5 Gbps (SStatus 113
SControl 300)*
Oct 27 15:27:09 localhost kernel: ata4.00: ATAPI: DV-28E-V, 1.AC, max
UDMA/33
Oct 27 15:27:09 localhost kernel: ata4.00: configured for UDMA/33
Oct 27 15:27:09 localhost kernel: ata5: SATA link down (SStatus 0 SControl
300)
Oct 27 15:27:09 localhost kernel: ata6: SATA link down (SStatus 0 SControl
300)
Oct 27 15:27:09 localhost kernel: Vendor: ATA Model: WDC
WD7500AAKS-0 Rev: 30.0
Oct 27 15:27:09 localhost kernel: Type:
Direct-Access ANSI SCSI revision: 05
Oct 27 15:27:09 localhost kernel: SCSI device sda: 1465149168 512-byte hdwr
sectors (750156 MB)
Oct 27 15:27:09 localhost kernel: sda: Write Protect is off
Oct 27 15:27:09 localhost kernel: SCSI device sda: drive cache: write back
Oct 27 15:27:09 localhost kernel: SCSI device sda: 1465149168 512-byte hdwr
sectors (750156 MB)
Oct 27 15:27:09 localhost kernel: sda: Write Protect is off
Oct 27 15:27:09 localhost kernel: SCSI device sda: drive cache: write back
Oct 27 15:27:09 localhost kernel: sda: sda1 sda2
Oct 27 15:27:09 localhost kernel: sd 0:0:0:0: Attached scsi disk sda
Oct 27 15:27:09 localhost kernel: Vendor: ATA Model: WDC
WD7500AAKS-0 Rev: 30.0
Oct 27 15:27:09 localhost kernel: Type:
Direct-Access ANSI SCSI revision: 05
Oct 27 15:27:09 localhost kernel: SCSI device sdb: 1465149168 512-byte hdwr
sectors (750156 MB)
Oct 27 15:27:09 localhost kernel: sdb: Write Protect is off
Oct 27 15:27:09 localhost kernel: SCSI device sdb: drive cache: write back
Oct 27 15:27:09 localhost kernel: SCSI device sdb: 1465149168 512-byte hdwr
sectors (750156 MB)
Oct 27 15:27:09 localhost kernel: sdb: Write Protect is off
Oct 27 15:27:09 localhost kernel: SCSI device sdb: drive cache: write back
Oct 27 15:27:09 localhost kernel: sdb: sdb1 sdb2
Oct 27 15:27:09 localhost kernel: sd 1:0:0:0: Attached scsi disk sdb
Oct 27 15:27:09 localhost kernel: Vendor: TEAC Model:
DV-28E-V Rev: 1.AC
Gracias.
Saludos.
--
Javier Fritz