Solucione el tema del registro de los x.lite, detallo los pasos uqe di:

Opensbc-general-parameters:
Seellecione B2BUpperRegMode

Upeer-Registration:
agregue la IP del SBC: 192.168.1.133
agregue la IP del AST*: 192.168.1.135

B2B-Routes
agregue: sip:192.168.1.135

Trusted-Domains:
Accept-all-calls=true

despues en la configuracion del x-lite puse:

Proxy: 192.168.1.133
Domain: 192.168.1.135

En el asterisk quedo:

Asterisk puerto 5060 y en el SBC quedo 9000

test*CLI> sip show peers
Name/username Host Dyn Nat ACL Port Status
101/101 192.168.1.133 D N 5060 OK (7 ms)
100/100 192.168.1.133 D N 5060 OK (8 ms)
2 sip peers [Monitored: 2 online, 0 offline Unmonitored: 0 online, 0 offline]

Solo falta que las cuentas se puedan llamar: error

2009/05/05 08:14:36.108 INF: [CID=0x09b5c709] <<< INVITE sip:101@192.168.1.135 SIP/2.0 Method(INVITE)  SRC: 192.168.1.104:32903:UDP enc=0 bytes=1054
2009/05/05 08:14:36.113 INF: [CID=0x09b5c709] >>> SIP/2.0 100 Trying Method(INVITE) DST: 192.168.1.104:32903:UDP SRC=192.168.1.133:5061 enc=0 bytes=321
2009/05/05 08:14:36.114 INF: [CID=0x09b5c709] *** CREATED (UAS) CALL *** Call-ID: NTgwZDQ3Zjc3YjY1MDBiMzFhOTUyYWFmNzdlY2U4NjQ.
2009/05/05 08:14:36.116 INF: [CID=0x09b5c709] *** B2BUA CONNECTION QUEUED FOR DELETION ***
2009/05/05 08:14:36.117 INF: [CID=0x09b5c709] *** B2BUACONNECTION DESTRUCTION SEQUENCE STARTED
2009/05/05 08:14:36.117 INF: [CID=0x09b5c709] *** CALL TEAR DOWN *** NTgwZDQ3Zjc3YjY1MDBiMzFhOTUyYWFmNzdlY2U4NjQ.-connection
2009/05/05 08:14:36.122 INF: [CID=0x09b5c709] >>> SIP/2.0 403 Forbidden Method(INVITE) DST: 192.168.1.104:32903:UDP SRC=192.168.1.133:5061 enc=0 bytes=462
2009/05/05 08:14:36.123 INF: [CID=0x09b5c709] *** B2BUA CONNECTION CLEANUP ***
2009/05/05 08:14:36.168 INF: [CID=0x09b5c709] <<< ACK sip:101@192.168.1.135 SIP/2.0 Method(ACK)  SRC: 192.168.1.104:32903:UDP enc=0 bytes=340
2009/05/05 08:14:41.142 INF: [CID=0x09b5c709] *** DESTROYED B2BUA CONNECTION ***



On Mon, 4 May 2009 16:40:21 -0300, Fequay wrote
> Buenas,
>
> Estimados alguno de ustedes a configurado Opensbc con asterisk.
>
> Tengo el siguiente esquema:
>
> x.lite(100) 192.168.1.133 192.168.1.135
> ---->opensbc(5060) -----> asterisk (5062)
> x.lite(101)
>
> Donde los xlite deben cruzar el SBC y registrar en el asterisk, lo que no esta sucediendo.
>
> Quedo a la espera de algun comentario.
>
> Saludos,
>
> Atte.
> Fernando Quil Ayala
>
>


Atte.
Fernando Quil Ayala