No alcanzo a ver nada mal el arranque del servidor. si el servidor se apaga previo al mensaje "shutting down for system halt" entonces se esta apagando planificadamente, usando "poweroff" o "shutdown -h", se me ocurren dos razones. 1- alguien te lo esta apagando ya sea corriendo el comando o apretando el boton de apagado (lo mismo que pasa con MS Windows) 2- el servidor tiene agentes corriendo que monitorean la salud del servidor y detecta que la temperatura esta muy alta y el agente apaga al servidor.
has un "grep" por kernel en /var/log/messages, si la temp u otra cosa esta provocando la accion de un agente entonces debe de logearlo ahi curoger
From: Guillermo Henríquez guillermomagno@gmail.com To: centos-es@centos.org Sent: Wednesday, January 7, 2015 10:20 AM Subject: [CentOS-es] ayudar servidor se me apaga
Amigos:
Necesito ayuda, un servidor se me apaga, con el mensaje shutting down for system halt y luego al arrancalo muestra el sig. log:
kernel: Linux version 2.6.18-348.1.1.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-54)) #1 SMP Tue Jan 22 16:19:19 EST 2013 kernel: Command line: ro root=/dev/md2 kernel: BIOS-provided physical RAM map: kernel: BIOS-e820: 0000000000010000 - 0000000000093800 (usable) kernel: BIOS-e820: 0000000000093800 - 0000000000093c00 (reserved) kernel: BIOS-e820: 0000000000098000 - 00000000000a0000 (reserved) kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) kernel: BIOS-e820: 0000000000100000 - 000000007d7d4000 (usable) kernel: BIOS-e820: 000000007d7d4000 - 000000007d7de000 (ACPI data) kernel: BIOS-e820: 000000007d7de000 - 000000007d7df000 (usable) kernel: BIOS-e820: 000000007d7df000 - 0000000080000000 (reserved) kernel: BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved) kernel: BIOS-e820: 00000000fec00000 - 00000000fee10000 (reserved) kernel: BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) kernel: DMI 2.7 present. kernel: No NUMA configuration found kernel: Faking a node at 0000000000000000-000000007d7df000 kernel: Bootmem setup node 0 0000000000000000-000000007d7df000 kernel: Memory for crash kernel (0x0 to 0x0) notwithin permissible range kernel: disabling kdump kernel: ACPI: PM-Timer IO Port: 0x908 kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) kernel: Processor #0 7:10 APIC version 21 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) kernel: Processor #2 7:10 APIC version 21 kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) kernel: Processor #4 7:10 APIC version 21 kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) kernel: Processor #6 7:10 APIC version 21 kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) last message repeated 59 times kernel: ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) kernel: ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) kernel: IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) kernel: Setting APIC routing to physical flat kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000 kernel: Using ACPI (MADT) for SMP configuration information kernel: Nosave address range: 0000000000093000 - 0000000000094000 kernel: Nosave address range: 0000000000093000 - 0000000000098000 kernel: Nosave address range: 0000000000098000 - 00000000000a0000 kernel: Nosave address range: 00000000000a0000 - 00000000000f0000 kernel: Nosave address range: 00000000000f0000 - 0000000000100000 kernel: Nosave address range: 000000007d7d4000 - 000000007d7de000 kernel: Allocating PCI resources starting at 88000000 (gap: 80000000:74000000) kernel: SMP: Allowing 64 CPUs, 60 hotplug CPUs kernel: Built 1 zonelists. Total pages: 505346 kernel: Kernel command line: ro root=/dev/md2 kernel: Initializing CPU#0 kernel: PID hash table entries: 4096 (order: 12, 32768 bytes) kernel: Console: colour VGA+ 80x25 kernel: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) kernel: Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) kernel: Checking aperture... kernel: Memory: 2012576k/2056060k available (2627k kernel code, 42944k reserved, 1677k data, 224k init) kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 6186.24 BogoMIPS (lpj=3093121) kernel: Security Framework v1.0.0 initialized kernel: SELinux: Initializing. kernel: selinux_register_security: Registering secondary module capability kernel: Capability LSM initialized as secondary kernel: Mount-cache hash table entries: 256 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K kernel: CPU: L2 cache: 256K kernel: CPU: L3 cache: 8192K kernel: using mwait in idle threads. kernel: CPU: Physical Processor ID: 0 kernel: CPU: Processor Core ID: 0 kernel: MCE: Machine Check Exception Reporting is disabled. kernel: SMP alternatives: switching to UP code kernel: ACPI: Core revision 20060707 kernel: Using local APIC timer interrupts. kernel: Detected 6.236 MHz APIC timer. kernel: SMP alternatives: switching to SMP code kernel: Booting processor 1/4 APIC 0x2 kernel: Initializing CPU#1 kernel: Calibrating delay using timer specific routine.. 6185.87 BogoMIPS (lpj=3092938) kernel: CPU: L1 I cache: 32K, L1 D cache: 32K kernel: CPU: L2 cache: 256K kernel: CPU: L3 cache: 8192K kernel: CPU: Physical Processor ID: 0 kernel: CPU: Processor Core ID: 1 kernel: Intel(R) Xeon(R) CPU E3-1220 V2 @ 3.10GHz stepping 09 kernel: SMP alternatives: switching to SMP code kernel: Booting processor 2/4 APIC 0x4 kernel: Initializing CPU#2 kernel: Calibrating delay using timer specific routine.. 6185.88 BogoMIPS (lpj=3092941) kernel: CPU: L1 I cache: 32K, L1 D cache: 32K kernel: CPU: L2 cache: 256K kernel: CPU: L3 cache: 8192K kernel: CPU: Physical Processor ID: 0 kernel: CPU: Processor Core ID: 2 kernel: Intel(R) Xeon(R) CPU E3-1220 V2 @ 3.10GHz stepping 09 kernel: SMP alternatives: switching to SMP code kernel: Booting processor 3/4 APIC 0x6 kernel: Initializing CPU#3 kernel: Calibrating delay using timer specific routine.. 6185.86 BogoMIPS (lpj=3092932) kernel: CPU: L1 I cache: 32K, L1 D cache: 32K kernel: CPU: L2 cache: 256K kernel: CPU: L3 cache: 8192K kernel: CPU: Physical Processor ID: 0 kernel: CPU: Processor Core ID: 3 kernel: Intel(R) Xeon(R) CPU E3-1220 V2 @ 3.10GHz stepping 09 kernel: Brought up 4 CPUs kernel: NMI watchdog testing PASSED. kernel: time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer. kernel: time.c: Detected 3093.121 MHz processor. kernel: migration_cost=23 kernel: checking if image is initramfs... it is kernel: Freeing initrd memory: 2693k freed kernel: NET: Registered protocol family 16 kernel: ACPI: bus type pci registered kernel: Warning: pci_mmcfg_init marking 256MB space uncacheable. kernel: MCFG table requires 64MB uncacheable only. Try booting with acpi_mcfg_max_pci_bus_num=on kernel: PCI: Using MMCONFIG at f4000000 kernel: ACPI: Interpreter enabled kernel: ACPI: Using IOAPIC for interrupt routing kernel: ACPI: No dock devices found. kernel: ACPI: PCI Root Bridge [PCI0] (0000:00) kernel: pci 0000:00:1c.0: PCI bridge to [bus 0a-0a] kernel: pci 0000:00:1c.4: PCI bridge to [bus 02-02] kernel: pci 0000:00:1c.7: PCI bridge to [bus 01-01] kernel: pci 0000:00:1e.0: PCI bridge to [bus 13-13] (subtractive decode) kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11) kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11) kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11) *0, disabled. kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11) kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11) kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 11) *4 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 10 11) *0, disabled. kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 11) *0, disabled. kernel: Linux Plug and Play Support v0.97 (c) Adam Belay kernel: pnp: PnP ACPI init kernel: pnp: PnP ACPI: found 10 devices kernel: usbcore: registered new driver usbfs kernel: usbcore: registered new driver hub kernel: PCI: Using ACPI for IRQ routing kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report kernel: NetLabel: Initializing kernel: NetLabel: domain hash size = 128 kernel: NetLabel: protocols = UNLABELED CIPSOv4 kernel: NetLabel: unlabeled traffic allowed by default kernel: hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0, 0, 0, 0, 0, 0 kernel: hpet0: 8 64-bit timers, 14318180 Hz kernel: DMAR:Host address width 39 kernel: DMAR:DRHD base: 0x000000fed90000 flags: 0x1 kernel: IOMMU fed90000: ver 1:0 cap c9008020660262 ecap f010da kernel: DMAR:RMRR base: 0x0000007dffd000 end: 0x0000007dffffff kernel: DMAR:No ATSR found kernel: PCI-GART: No AMD northbridge found. kernel: system 00:01: ioport range 0x408-0x40f has been reserved kernel: system 00:01: ioport range 0x4d0-0x4d1 has been reserved kernel: system 00:01: ioport range 0x310-0x313 has been reserved kernel: system 00:01: iomem range 0xf4000000-0xf7ffffff has been reserved kernel: system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved kernel: system 00:01: iomem range 0xfed90000-0xfed91fff has been reserved kernel: pci 0000:00:1c.0: PCI bridge to [bus 0a-0a] kernel: pci 0000:00:1c.0: bridge window [io disabled] kernel: pci 0000:00:1c.0: bridge window [mem disabled] kernel: pci 0000:00:1c.0: bridge window [mem pref disabled] kernel: pci 0000:00:1c.4: PCI bridge to [bus 02-02] kernel: pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff] kernel: pci 0000:00:1c.4: bridge window [mem 0xfbf00000-0xfbffffff] kernel: pci 0000:00:1c.4: bridge window [mem pref disabled] kernel: pci 0000:01:00.2: BAR 6: assigned [mem 0xfad00000-0xfad0ffff pref] kernel: pci 0000:00:1c.7: PCI bridge to [bus 01-01] kernel: pci 0000:00:1c.7: bridge window [io 0x2000-0x3fff] kernel: pci 0000:00:1c.7: bridge window [mem 0xfad00000-0xfbefffff] kernel: pci 0000:00:1c.7: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] kernel: pci 0000:00:1e.0: PCI bridge to [bus 13-13] kernel: pci 0000:00:1e.0: bridge window [io disabled] kernel: pci 0000:00:1e.0: bridge window [mem disabled] rpc.statd[2187]: Version 1.0.9 Starting kernel: pci 0000:00:1e.0: bridge window [mem pref disabled] kernel: GSI 16 sharing vector 0xA9 and IRQ 16 kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 kernel: ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169 kernel: GSI 17 sharing vector 0xB1 and IRQ 17 kernel: ACPI: PCI Interrupt 0000:00:1c.7[D] -> GSI 19 (level, low) -> IRQ 177 kernel: NET: Registered protocol family 2 kernel: IP route cache hash table entries: 65536 (order: 7, 524288 bytes) kernel: TCP established hash table entries: 262144 (order: 10, 4194304 bytes) kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) kernel: TCP: Hash tables configured (established 262144 bind 65536) kernel: TCP reno registered kernel: audit: initializing netlink socket (disabled) kernel: type=2000 audit(1420618613.662:1): initialized kernel: Total HugeTLB memory allocated, 0 kernel: VFS: Disk quotas dquot_6.5.1 kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) kernel: Initializing Cryptographic API kernel: alg: No test for crc32c (crc32c-generic) kernel: ksign: Installing public key data kernel: Loading keyring kernel: - Added public key B69F0AC84A59E856 kernel: - User ID: CentOS (Kernel Module GPG key) kernel: io scheduler noop registered kernel: io scheduler anticipatory registered kernel: io scheduler deadline registered kernel: io scheduler cfq registered (default) kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5 kernel: ACPI: CPU0 (power states: C1[C1] C2[C2]) kernel: ACPI: CPU1 (power states: C1[C1] C2[C2]) kernel: ACPI: CPU2 (power states: C1[C1] C2[C2]) kernel: ACPI: CPU3 (power states: C1[C1] C2[C2]) kernel: ACPI: Thermal Zone [THM0] (8 C) kernel: Real Time Clock Driver v1.12ac kernel: Non-volatile memory driver v1.2 kernel: Linux agpgart interface v0.101 (c) Dave Jones kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A kernel: brd: module loaded kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx kernel: ide-floppy driver 0.99.newide kernel: usbcore: registered new driver hiddev kernel: usbcore: registered new driver usbhid kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver kernel: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12 kernel: mice: PS/2 mouse device common for all mice kernel: md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 kernel: md: bitmap version 4.39 kernel: TCP bic registered kernel: Initializing IPsec netlink socket kernel: NET: Registered protocol family 1 kernel: NET: Registered protocol family 17 kernel: ACPI: (supports S0 S4 S5) kernel: Initalizing network drop monitor service kernel: Freeing unused kernel memory: 224k freed kernel: Write protecting the kernel read-only data: 533k kernel: input: AT Translated Set 2 keyboard as /class/input/input0 kernel: GSI 18 sharing vector 0xD9 and IRQ 18 kernel: ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 21 (level, low) -> IRQ 217 kernel: ehci_hcd 0000:00:1a.0: EHCI Host Controller kernel: ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 kernel: ehci_hcd 0000:00:1a.0: debug port 2 kernel: ehci_hcd 0000:00:1a.0: irq 217, io mem 0xfacd0000 kernel: ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 kernel: usb usb1: configuration #1 chosen from 1 choice kernel: hub 1-0:1.0: USB hub found kernel: hub 1-0:1.0: 2 ports detected kernel: GSI 19 sharing vector 0xE1 and IRQ 19 kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 225 kernel: ehci_hcd 0000:00:1d.0: EHCI Host Controller kernel: ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 kernel: ehci_hcd 0000:00:1d.0: debug port 2 kernel: ehci_hcd 0000:00:1d.0: irq 225, io mem 0xfacc0000 kernel: ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 kernel: usb usb2: configuration #1 chosen from 1 choice kernel: hub 2-0:1.0: USB hub found kernel: hub 2-0:1.0: 2 ports detected kernel: USB Universal Host Controller Interface driver v3.0 kernel: ACPI: PCI Interrupt 0000:01:00.4[B] -> GSI 16 (level, low) -> IRQ 169 kernel: uhci_hcd 0000:01:00.4: UHCI Host Controller kernel: uhci_hcd 0000:01:00.4: new USB bus registered, assigned bus number 3 kernel: uhci_hcd 0000:01:00.4: port count misdetected? forcing to 2 ports kernel: uhci_hcd 0000:01:00.4: irq 169, io base 0x00002000 kernel: usb usb3: configuration #1 chosen from 1 choice kernel: hub 3-0:1.0: USB hub found kernel: hub 3-0:1.0: 2 ports detected kernel: usb 1-1: new high speed USB device using ehci_hcd and address 2 kernel: md: raid1 personality registered for level 1 kernel: SCSI subsystem initialized kernel: GSI 20 sharing vector 0xE9 and IRQ 20 kernel: ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 233 kernel: usb 1-1: configuration #1 chosen from 1 choice kernel: hub 1-1:1.0: USB hub found kernel: hub 1-1:1.0: 6 ports detected kernel: usb 2-1: new high speed USB device using ehci_hcd and address 2 kernel: usb 2-1: configuration #1 chosen from 1 choice kernel: hub 2-1:1.0: USB hub found kernel: hub 2-1:1.0: 6 ports detected kernel: usb usb3: Controller not stopped yet! kernel: ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode kernel: ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ems kernel: scsi0 : ahci kernel: scsi1 : ahci kernel: scsi2 : ahci kernel: scsi3 : ahci kernel: scsi4 : ahci kernel: scsi5 : ahci kernel: ata1: SATA max UDMA/133 abar m2048@0xfacb0000 port 0xfacb0100 irq 50 kernel: ata2: SATA max UDMA/133 abar m2048@0xfacb0000 port 0xfacb0180 irq 50 kernel: ata3: SATA max UDMA/133 abar m2048@0xfacb0000 port 0xfacb0200 irq 50 kernel: ata4: SATA max UDMA/133 abar m2048@0xfacb0000 port 0xfacb0280 irq 50 kernel: ata5: SATA max UDMA/133 abar m2048@0xfacb0000 port 0xfacb0300 irq 50 kernel: ata6: SATA max UDMA/133 abar m2048@0xfacb0000 port 0xfacb0380 irq 50 kernel: ata1: SATA link down (SStatus 0 SControl 300) kernel: ata2: SATA link down (SStatus 0 SControl 300) kernel: ata3: SATA link down (SStatus 0 SControl 300) kernel: ata4: SATA link down (SStatus 0 SControl 300) kernel: ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) kernel: ata5.00: ATA-8: MB1000GCEHH, HPGD, max UDMA/133 kernel: ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) kernel: ata5.00: configured for UDMA/133 kernel: ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) kernel: ata6.00: ATA-8: MB1000GCEHH, HPGD, max UDMA/133 kernel: ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) kernel: ata6.00: configured for UDMA/133 kernel: Vendor: ATA Model: MB1000GCEHH Rev: HPGD kernel: Type: Direct-Access ANSI SCSI revision: 05 kernel: SCSI device sda: 1953525168 512-byte hdwr sectors (1000205 MB) kernel: sda: Write Protect is off kernel: SCSI device sda: drive cache: write back kernel: SCSI device sda: 1953525168 512-byte hdwr sectors (1000205 MB) kernel: sda: Write Protect is off kernel: SCSI device sda: drive cache: write back kernel: sda: sda1 sda2 sda3 kernel: sd 4:0:0:0: Attached scsi disk sda kernel: Vendor: ATA Model: MB1000GCEHH Rev: HPGD kernel: Type: Direct-Access ANSI SCSI revision: 05 kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB) kernel: sdb: Write Protect is off kernel: SCSI device sdb: drive cache: write back kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB) kernel: sdb: Write Protect is off kernel: SCSI device sdb: drive cache: write back kernel: sdb: sdb1 sdb2 sdb3 kernel: sd 5:0:0:0: Attached scsi disk sdb kernel: md: raid0 personality registered for level 0 kernel: Initializing USB Mass Storage driver... kernel: usbcore: registered new driver usb-storage kernel: USB Mass Storage support registered. kernel: device-mapper: uevent: version 1.0.3 kernel: device-mapper: ioctl: 4.11.6-ioctl (2011-02-18) initialised: dm-devel@redhat.com kernel: device-mapper: dm-raid45: initialized v0.2594l kernel: md: Autodetecting RAID arrays. kernel: md: autorun ... kernel: md: considering sdb3 ... kernel: md: adding sdb3 ... kernel: md: sdb2 has different UUID to sdb3 kernel: md: sdb1 has different UUID to sdb3 kernel: md: adding sda3 ... kernel: md: sda2 has different UUID to sdb3 kernel: md: sda1 has different UUID to sdb3 kernel: md: created md2 kernel: md: bind<sda3> kernel: md: bind<sdb3> kernel: md: running: <sdb3><sda3> kernel: raid1: raid set md2 active with 2 out of 2 mirrors kernel: md: considering sdb2 ... kernel: md: adding sdb2 ... kernel: md: sdb1 has different UUID to sdb2 kernel: md: adding sda2 ... kernel: md: sda1 has different UUID to sdb2 kernel: md: created md0 kernel: md: bind<sda2> kernel: md: bind<sdb2> kernel: md: running: <sdb2><sda2> kernel: md0: setting max_sectors to 512, segment boundary to 131071 kernel: raid0: looking at sdb2 kernel: raid0: comparing sdb2(2096384) with sdb2(2096384) kernel: raid0: END kernel: raid0: ==> UNIQUE kernel: raid0: 1 zones kernel: raid0: looking at sda2 kernel: raid0: comparing sda2(2096384) with sdb2(2096384) kernel: raid0: EQUAL kernel: raid0: FINAL 1 zones kernel: raid0: done. kernel: raid0 : md_size is 4192768 blocks. kernel: raid0 : conf->hash_spacing is 4192768 blocks. kernel: raid0 : nb_zone is 1. kernel: raid0 : Allocating 8 bytes for hash. kernel: md: considering sdb1 ... kernel: md: adding sdb1 ... kernel: md: adding sda1 ... kernel: md: created md1 kernel: md: bind<sda1> kernel: md: bind<sdb1> kernel: md: running: <sdb1><sda1> kernel: raid1: raid set md1 active with 2 out of 2 mirrors kernel: md: ... autorun DONE. kernel: md: Autodetecting RAID arrays. kernel: md: autorun ... kernel: md: ... autorun DONE. kernel: kjournald starting. Commit interval 5 seconds kernel: EXT3-fs: mounted filesystem with ordered data mode. kernel: SELinux: Disabled at runtime. kernel: type=1404 audit(1420618647.375:2): selinux=0 auid=4294967295 ses=4294967295 kernel: input: PC Speaker as /class/input/input1 kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 kernel: ACPI: PCI Interrupt 0000:01:00.2[B] -> GSI 16 (level, low) -> IRQ 169 kernel: e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k kernel: e1000e: Copyright(c) 1999 - 2012 Intel Corporation. kernel: e1000e 0000:02:00.0: Disabling ASPM L0s L1 kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169 kernel: e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode kernel: Floppy drive(s): fd0 is 1.44M kernel: sd 4:0:0:0: Attached scsi generic sg0 type 0 kernel: sd 5:0:0:0: Attached scsi generic sg1 type 0 kernel: e1000e 0000:02:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 38:ea:a7:aa:8a:32 kernel: e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection kernel: e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF kernel: floppy0: no floppy controllers found kernel: work still pending kernel: Floppy drive(s): fd0 is 1.44M kernel: floppy0: no floppy controllers found kernel: work still pending kernel: lp: driver loaded but no devices found kernel: ACPI: Power Button (FF) [PWRF] kernel: ACPI: Mapper loaded kernel: dell-wmi: No known WMI GUID found kernel: md: Autodetecting RAID arrays. kernel: md: autorun ... kernel: md: ... autorun DONE. kernel: device-mapper: multipath: version 1.0.6 loaded kernel: EXT3 FS on md2, internal journal kernel: kjournald starting. Commit interval 5 seconds kernel: EXT3 FS on md1, internal journal kernel: EXT3-fs: mounted filesystem with ordered data mode. kernel: Adding 4192760k swap on /dev/md0. Priority:-1 extents:1 across:4192760k kernel: Loading iSCSI transport class v2.0-871. kernel: 802.1Q VLAN Support v1.8 Ben Greear greearb@candelatech.com kernel: All bugs added by David S. Miller davem@redhat.com kernel: libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits. kernel: libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0. kernel: Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010) kernel: iscsi: registered transport (cxgb3i) kernel: IPv6: Loaded, but administratively disabled, reboot required to enable kernel: cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.12 (June 29, 2012) kernel: Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.2.2 (Jun 18, 2012) kernel: iscsi: registered transport (bnx2i) kernel: iscsi: registered transport (tcp) kernel: iscsi: registered transport (iser) kernel: iscsi: registered transport (be2iscsi) kernel: 8021q: adding VLAN 0 to HW filter on device eth0 kernel: e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx ntpd[2452]: ntpd 4.2.2p1@1.1570-o Fri Nov 18 13:21:21 UTC 2011 (1) ntpd[2453]: precision = 1.000 usec ntpd[2453]: Listening on interface wildcard, 0.0.0.0#123 Disabled ntpd[2453]: Listening on interface lo, 127.0.0.1#123 Enabled ntpd[2453]: Listening on interface eth0, 178.18.69.1#123 Enabled ntpd[2453]: kernel time sync status 0040 ntpd[2453]: getaddrinfo: "::1" invalid host address, ignored xinetd[2437]: xinetd Version 2.3.14 started with libwrap loadavg labeled-networking options compiled in. xinetd[2437]: Started working: 1 available service FaxQueuer[2970]: HylaFAX (tm) Version 4.3.10 FaxQueuer[2970]: Copyright (c) 1990-1996 Sam Leffler FaxQueuer[2970]: Copyright (c) 1991-1996 Silicon Graphics, Inc. HylaFAX[2973]: HylaFAX INET Protocol Server: restarted. saslauthd[3001]: detach_tty : master pid is: 3001 saslauthd[3001]: ipc_init : listening on socket: /var/run/saslauthd/mux ntpd[2453]: frequency initialized 8.527 PPM from /var/lib/ntp/drift ntpd[2453]: synchronized to 200.27.106.115, stratum 1 ntpd[2453]: kernel time sync enabled 0001 _______________________________________________ CentOS-es mailing list CentOS-es@centos.org http://lists.centos.org/mailman/listinfo/centos-es