As some e-mails ago, I'm trying to play beryl in my laptop.
I successfully configured my xorg.conf (thanks to the comunity for the help that allowed me that).
The problem:
When I boot the laptop without external LCD/CRT, beryl is working fine, but when I boot it with the external, it recognice fine the external LCD and don't want to allow beryl run.
What beryl says:
=== BEGIN === $ beryl --test-only ************************************************************** * Beryl system compatiblity check * **************************************************************
Detected xserver : AIGLX
Checking Display :0.0 ...
Checking for XComposite extension : passed (v0.3) Checking for XDamage extension : passed Checking for RandR extension : passed Checking for XSync extension : passed
Checking Screen 0 ...
libGL warning: 3D driver claims to not support visual 0x4b Checking for GLX_SGIX_fbconfig : passed Checking for GLX_EXT_texture_from_pixmap : passed Checking for non power of two texture support : passed Checking maximum texture size : failed
Root window size (2960/1050) is bigger then maximum texture size (2048x2048)
X Error of failed request: GLXBadContext Major opcode of failed request: 144 (GLX) Minor opcode of failed request: 4 (X_GLXDestroyContext) Serial number of failed request: 38 Current serial number in output stream: 40 === END ===
Searching the web I readed that with "driconf" util I can try to solve the problem. I had installed driconf 0.9.1 successfully, but I don't know how to change that parameters.
Does anyone used driconf or knows how can I solve this problem with beryl/compiz?
Distro: Centos 5 (kernel 2.6.18) Xorg 7.1.1 driconf 0.9.1
Regards
As some guys apoint to me, I have to restrict to the maximun texture size my desktop size to allow beryl work with dualhead.
Ok. I do it and ¡¡its working!!
My trick has been to use the second monitor "below" or "above" the primary, then my desktop fit into texture size window.
Now I'm happy and can enjoy beryl with a dual head configuration with my desktop.
Thank you very much to all people that allow me to do that with their help.
In some days/weeks I'll write this into beryl wiki to share my experience with the comunity.
Thank you very much again.
Regards
El Mie, 4 de Julio de 2007, 10:38, ArcosCom Linux User escribió:
As some e-mails ago, I'm trying to play beryl in my laptop.
I successfully configured my xorg.conf (thanks to the comunity for the help that allowed me that).
The problem:
When I boot the laptop without external LCD/CRT, beryl is working fine, but when I boot it with the external, it recognice fine the external LCD and don't want to allow beryl run.
What beryl says:
=== BEGIN === $ beryl --test-only
- Beryl system compatiblity check *
Detected xserver : AIGLX
Checking Display :0.0 ...
Checking for XComposite extension : passed (v0.3) Checking for XDamage extension : passed Checking for RandR extension : passed Checking for XSync extension : passed
Checking Screen 0 ...
libGL warning: 3D driver claims to not support visual 0x4b Checking for GLX_SGIX_fbconfig : passed Checking for GLX_EXT_texture_from_pixmap : passed Checking for non power of two texture support : passed Checking maximum texture size : failed
Root window size (2960/1050) is bigger then maximum texture size (2048x2048)
X Error of failed request: GLXBadContext Major opcode of failed request: 144 (GLX) Minor opcode of failed request: 4 (X_GLXDestroyContext) Serial number of failed request: 38 Current serial number in output stream: 40 === END ===
Searching the web I readed that with "driconf" util I can try to solve the problem. I had installed driconf 0.9.1 successfully, but I don't know how to change that parameters.
Does anyone used driconf or knows how can I solve this problem with beryl/compiz?
Distro: Centos 5 (kernel 2.6.18) Xorg 7.1.1 driconf 0.9.1
Regards
-- ArcosCom Linux User
xorg mailing list xorg@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/xorg
-
ArcosCom Linux User