No alcanzo a ver nada mal el arranque del servidor. si el servidor se apaga previo al mensaje "shutting down for system halt" entonces se esta apagando planificadamente, usando "poweroff" o "shutdown -h", se me ocurren dos razones. 1- alguien te lo esta apagando ya sea corriendo el comando o apretando el boton de apagado (lo mismo que pasa con MS Windows) 2- el servidor tiene agentes corriendo que monitorean la salud del servidor y detecta que la temperatura esta muy alta y el agente apaga al servidor.

has un "grep" por kernel en /var/log/messages, si la temp u otra cosa esta provocando la accion de un agente entonces debe de logearlo ahi curoger

From: Guillermo Henríquez guillermomagno@gmail.com To: centos-es@centos.org Sent: Wednesday, January 7, 2015 10:20 AM Subject: [CentOS-es] ayudar servidor se me apaga

Amigos:

Necesito ayuda, un servidor se me apaga, con el mensaje  shutting down for system halt y luego al arrancalo muestra el sig. log:

kernel: Linux version 2.6.18-348.1.1.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-54)) #1 SMP Tue Jan 22 16:19:19 EST 2013 kernel: Command line: ro root=/dev/md2 kernel: BIOS-provided physical RAM map: kernel:  BIOS-e820: 0000000000010000 - 0000000000093800 (usable) kernel:  BIOS-e820: 0000000000093800 - 0000000000093c00 (reserved) kernel:  BIOS-e820: 0000000000098000 - 00000000000a0000 (reserved) kernel:  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) kernel:  BIOS-e820: 0000000000100000 - 000000007d7d4000 (usable) kernel:  BIOS-e820: 000000007d7d4000 - 000000007d7de000 (ACPI data) kernel:  BIOS-e820: 000000007d7de000 - 000000007d7df000 (usable) kernel:  BIOS-e820: 000000007d7df000 - 0000000080000000 (reserved) kernel:  BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved) kernel:  BIOS-e820: 00000000fec00000 - 00000000fee10000 (reserved) kernel:  BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) kernel: DMI 2.7 present. kernel: No NUMA configuration found kernel: Faking a node at 0000000000000000-000000007d7df000 kernel: Bootmem setup node 0 0000000000000000-000000007d7df000 kernel: Memory for crash kernel (0x0 to 0x0) notwithin permissible range kernel: disabling kdump kernel: ACPI: PM-Timer IO Port: 0x908 kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) kernel: Processor #0 7:10 APIC version 21 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) kernel: Processor #2 7:10 APIC version 21 kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) kernel: Processor #4 7:10 APIC version 21 kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) kernel: Processor #6 7:10 APIC version 21 kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) last message repeated 59 times kernel: ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) kernel: ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) kernel: IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) kernel: Setting APIC routing to physical flat kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000 kernel: Using ACPI (MADT) for SMP configuration information kernel: Nosave address range: 0000000000093000 - 0000000000094000 kernel: Nosave address range: 0000000000093000 - 0000000000098000 kernel: Nosave address range: 0000000000098000 - 00000000000a0000 kernel: Nosave address range: 00000000000a0000 - 00000000000f0000 kernel: Nosave address range: 00000000000f0000 - 0000000000100000 kernel: Nosave address range: 000000007d7d4000 - 000000007d7de000 kernel: Allocating PCI resources starting at 88000000 (gap: 80000000:74000000) kernel: SMP: Allowing 64 CPUs, 60 hotplug CPUs kernel: Built 1 zonelists.  Total pages: 505346 kernel: Kernel command line: ro root=/dev/md2 kernel: Initializing CPU#0 kernel: PID hash table entries: 4096 (order: 12, 32768 bytes) kernel: Console: colour VGA+ 80x25 kernel: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) kernel: Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) kernel: Checking aperture... kernel: Memory: 2012576k/2056060k available (2627k kernel code, 42944k reserved, 1677k data, 224k init) kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 6186.24 BogoMIPS (lpj=3093121) kernel: Security Framework v1.0.0 initialized kernel: SELinux:  Initializing. kernel: selinux_register_security:  Registering secondary module capability kernel: Capability LSM initialized as secondary kernel: Mount-cache hash table entries: 256 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K kernel: CPU: L2 cache: 256K kernel: CPU: L3 cache: 8192K kernel: using mwait in idle threads. kernel: CPU: Physical Processor ID: 0 kernel: CPU: Processor Core ID: 0 kernel: MCE: Machine Check Exception Reporting is disabled. kernel: SMP alternatives: switching to UP code kernel: ACPI: Core revision 20060707 kernel: Using local APIC timer interrupts. kernel: Detected 6.236 MHz APIC timer. kernel: SMP alternatives: switching to SMP code kernel: Booting processor 1/4 APIC 0x2 kernel: Initializing CPU#1 kernel: Calibrating delay using timer specific routine.. 6185.87 BogoMIPS (lpj=3092938) kernel: CPU: L1 I cache: 32K, L1 D cache: 32K kernel: CPU: L2 cache: 256K kernel: CPU: L3 cache: 8192K kernel: CPU: Physical Processor ID: 0 kernel: CPU: Processor Core ID: 1 kernel:      Intel(R) Xeon(R) CPU E3-1220 V2 @ 3.10GHz stepping 09 kernel: SMP alternatives: switching to SMP code kernel: Booting processor 2/4 APIC 0x4 kernel: Initializing CPU#2 kernel: Calibrating delay using timer specific routine.. 6185.88 BogoMIPS (lpj=3092941) kernel: CPU: L1 I cache: 32K, L1 D cache: 32K kernel: CPU: L2 cache: 256K kernel: CPU: L3 cache: 8192K kernel: CPU: Physical Processor ID: 0 kernel: CPU: Processor Core ID: 2 kernel:      Intel(R) Xeon(R) CPU E3-1220 V2 @ 3.10GHz stepping 09 kernel: SMP alternatives: switching to SMP code kernel: Booting processor 3/4 APIC 0x6 kernel: Initializing CPU#3 kernel: Calibrating delay using timer specific routine.. 6185.86 BogoMIPS (lpj=3092932) kernel: CPU: L1 I cache: 32K, L1 D cache: 32K kernel: CPU: L2 cache: 256K kernel: CPU: L3 cache: 8192K kernel: CPU: Physical Processor ID: 0 kernel: CPU: Processor Core ID: 3 kernel:      Intel(R) Xeon(R) CPU E3-1220 V2 @ 3.10GHz stepping 09 kernel: Brought up 4 CPUs kernel: NMI watchdog testing PASSED. kernel: time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer. kernel: time.c: Detected 3093.121 MHz processor. kernel: migration_cost=23 kernel: checking if image is initramfs... it is kernel: Freeing initrd memory: 2693k freed kernel: NET: Registered protocol family 16 kernel: ACPI: bus type pci registered kernel: Warning: pci_mmcfg_init marking 256MB space uncacheable. kernel: MCFG table requires 64MB uncacheable only. Try booting with acpi_mcfg_max_pci_bus_num=on kernel: PCI: Using MMCONFIG at f4000000 kernel: ACPI: Interpreter enabled kernel: ACPI: Using IOAPIC for interrupt routing kernel: ACPI: No dock devices found. kernel: ACPI: PCI Root Bridge [PCI0] (0000:00) kernel: pci 0000:00:1c.0: PCI bridge to [bus 0a-0a] kernel: pci 0000:00:1c.4: PCI bridge to [bus 02-02] kernel: pci 0000:00:1c.7: PCI bridge to [bus 01-01] kernel: pci 0000:00:1e.0: PCI bridge to [bus 13-13] (subtractive decode) kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11) kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11) kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11) *0, disabled. kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11) kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11) kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 11) *4 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 10 11) *0, disabled. kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 11) *0, disabled. kernel: Linux Plug and Play Support v0.97 (c) Adam Belay kernel: pnp: PnP ACPI init kernel: pnp: PnP ACPI: found 10 devices kernel: usbcore: registered new driver usbfs kernel: usbcore: registered new driver hub kernel: PCI: Using ACPI for IRQ routing kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report kernel: NetLabel: Initializing kernel: NetLabel:  domain hash size = 128 kernel: NetLabel:  protocols = UNLABELED CIPSOv4 kernel: NetLabel:  unlabeled traffic allowed by default kernel: hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0, 0, 0, 0, 0, 0 kernel: hpet0: 8 64-bit timers, 14318180 Hz kernel: DMAR:Host address width 39 kernel: DMAR:DRHD base: 0x000000fed90000 flags: 0x1 kernel: IOMMU fed90000: ver 1:0 cap c9008020660262 ecap f010da kernel: DMAR:RMRR base: 0x0000007dffd000 end: 0x0000007dffffff kernel: DMAR:No ATSR found kernel: PCI-GART: No AMD northbridge found. kernel: system 00:01: ioport range 0x408-0x40f has been reserved kernel: system 00:01: ioport range 0x4d0-0x4d1 has been reserved kernel: system 00:01: ioport range 0x310-0x313 has been reserved kernel: system 00:01: iomem range 0xf4000000-0xf7ffffff has been reserved kernel: system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved kernel: system 00:01: iomem range 0xfed90000-0xfed91fff has been reserved kernel: pci 0000:00:1c.0: PCI bridge to [bus 0a-0a] kernel: pci 0000:00:1c.0:  bridge window [io  disabled] kernel: pci 0000:00:1c.0:  bridge window [mem disabled] kernel: pci 0000:00:1c.0:  bridge window [mem pref disabled] kernel: pci 0000:00:1c.4: PCI bridge to [bus 02-02] kernel: pci 0000:00:1c.4:  bridge window [io  0x4000-0x4fff] kernel: pci 0000:00:1c.4:  bridge window [mem 0xfbf00000-0xfbffffff] kernel: pci 0000:00:1c.4:  bridge window [mem pref disabled] kernel: pci 0000:01:00.2: BAR 6: assigned [mem 0xfad00000-0xfad0ffff pref] kernel: pci 0000:00:1c.7: PCI bridge to [bus 01-01] kernel: pci 0000:00:1c.7:  bridge window [io  0x2000-0x3fff] kernel: pci 0000:00:1c.7:  bridge window [mem 0xfad00000-0xfbefffff] kernel: pci 0000:00:1c.7:  bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] kernel: pci 0000:00:1e.0: PCI bridge to [bus 13-13] kernel: pci 0000:00:1e.0:  bridge window [io  disabled] kernel: pci 0000:00:1e.0:  bridge window [mem disabled] rpc.statd[2187]: Version 1.0.9 Starting kernel: pci 0000:00:1e.0:  bridge window [mem pref disabled] kernel: GSI 16 sharing vector 0xA9 and IRQ 16 kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 kernel: ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169 kernel: GSI 17 sharing vector 0xB1 and IRQ 17 kernel: ACPI: PCI Interrupt 0000:00:1c.7[D] -> GSI 19 (level, low) -> IRQ 177 kernel: NET: Registered protocol family 2 kernel: IP route cache hash table entries: 65536 (order: 7, 524288 bytes) kernel: TCP established hash table entries: 262144 (order: 10, 4194304 bytes) kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) kernel: TCP: Hash tables configured (established 262144 bind 65536) kernel: TCP reno registered kernel: audit: initializing netlink socket (disabled) kernel: type=2000 audit(1420618613.662:1): initialized kernel: Total HugeTLB memory allocated, 0 kernel: VFS: Disk quotas dquot_6.5.1 kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) kernel: Initializing Cryptographic API kernel: alg: No test for crc32c (crc32c-generic) kernel: ksign: Installing public key data kernel: Loading keyring kernel: - Added public key B69F0AC84A59E856 kernel: - User ID: CentOS (Kernel Module GPG key) kernel: io scheduler noop registered kernel: io scheduler anticipatory registered kernel: io scheduler deadline registered kernel: io scheduler cfq registered (default) kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5 kernel: ACPI: CPU0 (power states: C1[C1] C2[C2]) kernel: ACPI: CPU1 (power states: C1[C1] C2[C2]) kernel: ACPI: CPU2 (power states: C1[C1] C2[C2]) kernel: ACPI: CPU3 (power states: C1[C1] C2[C2]) kernel: ACPI: Thermal Zone [THM0] (8 C) kernel: Real Time Clock Driver v1.12ac kernel: Non-volatile memory driver v1.2 kernel: Linux agpgart interface v0.101 (c) Dave Jones kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A kernel: brd: module loaded kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx kernel: ide-floppy driver 0.99.newide kernel: usbcore: registered new driver hiddev kernel: usbcore: registered new driver usbhid kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver kernel: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12 kernel: mice: PS/2 mouse device common for all mice kernel: md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 kernel: md: bitmap version 4.39 kernel: TCP bic registered kernel: Initializing IPsec netlink socket kernel: NET: Registered protocol family 1 kernel: NET: Registered protocol family 17 kernel: ACPI: (supports S0 S4 S5) kernel: Initalizing network drop monitor service kernel: Freeing unused kernel memory: 224k freed kernel: Write protecting the kernel read-only data: 533k kernel: input: AT Translated Set 2 keyboard as /class/input/input0 kernel: GSI 18 sharing vector 0xD9 and IRQ 18 kernel: ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 21 (level, low) -> IRQ 217 kernel: ehci_hcd 0000:00:1a.0: EHCI Host Controller kernel: ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 kernel: ehci_hcd 0000:00:1a.0: debug port 2 kernel: ehci_hcd 0000:00:1a.0: irq 217, io mem 0xfacd0000 kernel: ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 kernel: usb usb1: configuration #1 chosen from 1 choice kernel: hub 1-0:1.0: USB hub found kernel: hub 1-0:1.0: 2 ports detected kernel: GSI 19 sharing vector 0xE1 and IRQ 19 kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 225 kernel: ehci_hcd 0000:00:1d.0: EHCI Host Controller kernel: ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 kernel: ehci_hcd 0000:00:1d.0: debug port 2 kernel: ehci_hcd 0000:00:1d.0: irq 225, io mem 0xfacc0000 kernel: ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 kernel: usb usb2: configuration #1 chosen from 1 choice kernel: hub 2-0:1.0: USB hub found kernel: hub 2-0:1.0: 2 ports detected kernel: USB Universal Host Controller Interface driver v3.0 kernel: ACPI: PCI Interrupt 0000:01:00.4[B] -> GSI 16 (level, low) -> IRQ 169 kernel: uhci_hcd 0000:01:00.4: UHCI Host Controller kernel: uhci_hcd 0000:01:00.4: new USB bus registered, assigned bus number 3 kernel: uhci_hcd 0000:01:00.4: port count misdetected? forcing to 2 ports kernel: uhci_hcd 0000:01:00.4: irq 169, io base 0x00002000 kernel: usb usb3: configuration #1 chosen from 1 choice kernel: hub 3-0:1.0: USB hub found kernel: hub 3-0:1.0: 2 ports detected kernel: usb 1-1: new high speed USB device using ehci_hcd and address 2 kernel: md: raid1 personality registered for level 1 kernel: SCSI subsystem initialized kernel: GSI 20 sharing vector 0xE9 and IRQ 20 kernel: ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 233 kernel: usb 1-1: configuration #1 chosen from 1 choice kernel: hub 1-1:1.0: USB hub found kernel: hub 1-1:1.0: 6 ports detected kernel: usb 2-1: new high speed USB device using ehci_hcd and address 2 kernel: usb 2-1: configuration #1 chosen from 1 choice kernel: hub 2-1:1.0: USB hub found kernel: hub 2-1:1.0: 6 ports detected kernel: usb usb3: Controller not stopped yet! kernel: ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode kernel: ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ems kernel: scsi0 : ahci kernel: scsi1 : ahci kernel: scsi2 : ahci kernel: scsi3 : ahci kernel: scsi4 : ahci kernel: scsi5 : ahci kernel: ata1: SATA max UDMA/133 abar m2048@0xfacb0000 port 0xfacb0100 irq 50 kernel: ata2: SATA max UDMA/133 abar m2048@0xfacb0000 port 0xfacb0180 irq 50 kernel: ata3: SATA max UDMA/133 abar m2048@0xfacb0000 port 0xfacb0200 irq 50 kernel: ata4: SATA max UDMA/133 abar m2048@0xfacb0000 port 0xfacb0280 irq 50 kernel: ata5: SATA max UDMA/133 abar m2048@0xfacb0000 port 0xfacb0300 irq 50 kernel: ata6: SATA max UDMA/133 abar m2048@0xfacb0000 port 0xfacb0380 irq 50 kernel: ata1: SATA link down (SStatus 0 SControl 300) kernel: ata2: SATA link down (SStatus 0 SControl 300) kernel: ata3: SATA link down (SStatus 0 SControl 300) kernel: ata4: SATA link down (SStatus 0 SControl 300) kernel: ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) kernel: ata5.00: ATA-8: MB1000GCEHH, HPGD, max UDMA/133 kernel: ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) kernel: ata5.00: configured for UDMA/133 kernel: ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) kernel: ata6.00: ATA-8: MB1000GCEHH, HPGD, max UDMA/133 kernel: ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) kernel: ata6.00: configured for UDMA/133 kernel:  Vendor: ATA      Model: MB1000GCEHH      Rev: HPGD kernel:  Type:  Direct-Access                      ANSI SCSI revision: 05 kernel: SCSI device sda: 1953525168 512-byte hdwr sectors (1000205 MB) kernel: sda: Write Protect is off kernel: SCSI device sda: drive cache: write back kernel: SCSI device sda: 1953525168 512-byte hdwr sectors (1000205 MB) kernel: sda: Write Protect is off kernel: SCSI device sda: drive cache: write back kernel:  sda: sda1 sda2 sda3 kernel: sd 4:0:0:0: Attached scsi disk sda kernel:  Vendor: ATA      Model: MB1000GCEHH      Rev: HPGD kernel:  Type:  Direct-Access                      ANSI SCSI revision: 05 kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB) kernel: sdb: Write Protect is off kernel: SCSI device sdb: drive cache: write back kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB) kernel: sdb: Write Protect is off kernel: SCSI device sdb: drive cache: write back kernel:  sdb: sdb1 sdb2 sdb3 kernel: sd 5:0:0:0: Attached scsi disk sdb kernel: md: raid0 personality registered for level 0 kernel: Initializing USB Mass Storage driver... kernel: usbcore: registered new driver usb-storage kernel: USB Mass Storage support registered. kernel: device-mapper: uevent: version 1.0.3 kernel: device-mapper: ioctl: 4.11.6-ioctl (2011-02-18) initialised: dm-devel@redhat.com kernel: device-mapper: dm-raid45: initialized v0.2594l kernel: md: Autodetecting RAID arrays. kernel: md: autorun ... kernel: md: considering sdb3 ... kernel: md:  adding sdb3 ... kernel: md: sdb2 has different UUID to sdb3 kernel: md: sdb1 has different UUID to sdb3 kernel: md:  adding sda3 ... kernel: md: sda2 has different UUID to sdb3 kernel: md: sda1 has different UUID to sdb3 kernel: md: created md2 kernel: md: bind<sda3> kernel: md: bind<sdb3> kernel: md: running: <sdb3><sda3> kernel: raid1: raid set md2 active with 2 out of 2 mirrors kernel: md: considering sdb2 ... kernel: md:  adding sdb2 ... kernel: md: sdb1 has different UUID to sdb2 kernel: md:  adding sda2 ... kernel: md: sda1 has different UUID to sdb2 kernel: md: created md0 kernel: md: bind<sda2> kernel: md: bind<sdb2> kernel: md: running: <sdb2><sda2> kernel: md0: setting max_sectors to 512, segment boundary to 131071 kernel: raid0: looking at sdb2 kernel: raid0:  comparing sdb2(2096384) with sdb2(2096384) kernel: raid0:  END kernel: raid0:  ==> UNIQUE kernel: raid0: 1 zones kernel: raid0: looking at sda2 kernel: raid0:  comparing sda2(2096384) with sdb2(2096384) kernel: raid0:  EQUAL kernel: raid0: FINAL 1 zones kernel: raid0: done. kernel: raid0 : md_size is 4192768 blocks. kernel: raid0 : conf->hash_spacing is 4192768 blocks. kernel: raid0 : nb_zone is 1. kernel: raid0 : Allocating 8 bytes for hash. kernel: md: considering sdb1 ... kernel: md:  adding sdb1 ... kernel: md:  adding sda1 ... kernel: md: created md1 kernel: md: bind<sda1> kernel: md: bind<sdb1> kernel: md: running: <sdb1><sda1> kernel: raid1: raid set md1 active with 2 out of 2 mirrors kernel: md: ... autorun DONE. kernel: md: Autodetecting RAID arrays. kernel: md: autorun ... kernel: md: ... autorun DONE. kernel: kjournald starting.  Commit interval 5 seconds kernel: EXT3-fs: mounted filesystem with ordered data mode. kernel: SELinux:  Disabled at runtime. kernel: type=1404 audit(1420618647.375:2): selinux=0 auid=4294967295 ses=4294967295 kernel: input: PC Speaker as /class/input/input1 kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 kernel: ACPI: PCI Interrupt 0000:01:00.2[B] -> GSI 16 (level, low) -> IRQ 169 kernel: e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k kernel: e1000e: Copyright(c) 1999 - 2012 Intel Corporation. kernel: e1000e 0000:02:00.0: Disabling ASPM L0s L1 kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169 kernel: e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode kernel: Floppy drive(s): fd0 is 1.44M kernel: sd 4:0:0:0: Attached scsi generic sg0 type 0 kernel: sd 5:0:0:0: Attached scsi generic sg1 type 0 kernel: e1000e 0000:02:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 38:ea:a7:aa:8a:32 kernel: e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection kernel: e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF kernel: floppy0: no floppy controllers found kernel: work still pending kernel: Floppy drive(s): fd0 is 1.44M kernel: floppy0: no floppy controllers found kernel: work still pending kernel: lp: driver loaded but no devices found kernel: ACPI: Power Button (FF) [PWRF] kernel: ACPI: Mapper loaded kernel: dell-wmi: No known WMI GUID found kernel: md: Autodetecting RAID arrays. kernel: md: autorun ... kernel: md: ... autorun DONE. kernel: device-mapper: multipath: version 1.0.6 loaded kernel: EXT3 FS on md2, internal journal kernel: kjournald starting.  Commit interval 5 seconds kernel: EXT3 FS on md1, internal journal kernel: EXT3-fs: mounted filesystem with ordered data mode. kernel: Adding 4192760k swap on /dev/md0.  Priority:-1 extents:1 across:4192760k kernel: Loading iSCSI transport class v2.0-871. kernel: 802.1Q VLAN Support v1.8 Ben Greear greearb@candelatech.com kernel: All bugs added by David S. Miller davem@redhat.com kernel: libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits. kernel: libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0. kernel: Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010) kernel: iscsi: registered transport (cxgb3i) kernel: IPv6: Loaded, but administratively disabled, reboot required to enable kernel: cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.12 (June 29, 2012) kernel: Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.2.2 (Jun 18, 2012) kernel: iscsi: registered transport (bnx2i) kernel: iscsi: registered transport (tcp) kernel: iscsi: registered transport (iser) kernel: iscsi: registered transport (be2iscsi) kernel: 8021q: adding VLAN 0 to HW filter on device eth0 kernel: e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx ntpd[2452]: ntpd 4.2.2p1@1.1570-o Fri Nov 18 13:21:21 UTC 2011 (1) ntpd[2453]: precision = 1.000 usec ntpd[2453]: Listening on interface wildcard, 0.0.0.0#123 Disabled ntpd[2453]: Listening on interface lo, 127.0.0.1#123 Enabled ntpd[2453]: Listening on interface eth0, 178.18.69.1#123 Enabled ntpd[2453]: kernel time sync status 0040 ntpd[2453]: getaddrinfo: "::1" invalid host address, ignored xinetd[2437]: xinetd Version 2.3.14 started with libwrap loadavg labeled-networking options compiled in. xinetd[2437]: Started working: 1 available service FaxQueuer[2970]: HylaFAX (tm) Version 4.3.10 FaxQueuer[2970]: Copyright (c) 1990-1996 Sam Leffler FaxQueuer[2970]: Copyright (c) 1991-1996 Silicon Graphics, Inc. HylaFAX[2973]: HylaFAX INET Protocol Server: restarted. saslauthd[3001]: detach_tty      : master pid is: 3001 saslauthd[3001]: ipc_init        : listening on socket: /var/run/saslauthd/mux ntpd[2453]: frequency initialized 8.527 PPM from /var/lib/ntp/drift ntpd[2453]: synchronized to 200.27.106.115, stratum 1 ntpd[2453]: kernel time sync enabled 0001 _______________________________________________ CentOS-es mailing list CentOS-es@centos.org http://lists.centos.org/mailman/listinfo/centos-es

Lo único que puedo detectar es que activaron IPv6 y eso requiere de un reinicio de sistema para que lo tome activo. El segundo detalle es el raid no se si te este causando problemas la controladora seria cosa de validar si actualizaron el kernel y exista un problema con ello.

Como comentan seria cosa de probar : Validar por partes el kernel y si es algo físico.

Probar si es el caso con el kernel anterior.

Actualizar kernel nuevamente.

Actualizar firmware de la controladora RAID.

Saludos,

On Wednesday, January 7, 2015, Guillermo Henríquez guillermomagno@gmail.com wrote:

Amigos:

Necesito ayuda, un servidor se me apaga, con el mensaje shutting down for system halt y luego al arrancalo muestra el sig. log:

kernel: Linux version 2.6.18-348.1.1.el5 (mockbuild@builder10.centos.org javascript:;) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-54)) #1 SMP Tue Jan 22 16:19:19 EST 2013 kernel: Command line: ro root=/dev/md2 kernel: BIOS-provided physical RAM map: kernel: BIOS-e820: 0000000000010000 - 0000000000093800 (usable) kernel: BIOS-e820: 0000000000093800 - 0000000000093c00 (reserved) kernel: BIOS-e820: 0000000000098000 - 00000000000a0000 (reserved) kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) kernel: BIOS-e820: 0000000000100000 - 000000007d7d4000 (usable) kernel: BIOS-e820: 000000007d7d4000 - 000000007d7de000 (ACPI data) kernel: BIOS-e820: 000000007d7de000 - 000000007d7df000 (usable) kernel: BIOS-e820: 000000007d7df000 - 0000000080000000 (reserved) kernel: BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved) kernel: BIOS-e820: 00000000fec00000 - 00000000fee10000 (reserved) kernel: BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) kernel: DMI 2.7 present. kernel: No NUMA configuration found kernel: Faking a node at 0000000000000000-000000007d7df000 kernel: Bootmem setup node 0 0000000000000000-000000007d7df000 kernel: Memory for crash kernel (0x0 to 0x0) notwithin permissible range kernel: disabling kdump kernel: ACPI: PM-Timer IO Port: 0x908 kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) kernel: Processor #0 7:10 APIC version 21 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) kernel: Processor #2 7:10 APIC version 21 kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) kernel: Processor #4 7:10 APIC version 21 kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) kernel: Processor #6 7:10 APIC version 21 kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) last message repeated 59 times kernel: ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) kernel: ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) kernel: IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) kernel: Setting APIC routing to physical flat kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000 kernel: Using ACPI (MADT) for SMP configuration information kernel: Nosave address range: 0000000000093000 - 0000000000094000 kernel: Nosave address range: 0000000000093000 - 0000000000098000 kernel: Nosave address range: 0000000000098000 - 00000000000a0000 kernel: Nosave address range: 00000000000a0000 - 00000000000f0000 kernel: Nosave address range: 00000000000f0000 - 0000000000100000 kernel: Nosave address range: 000000007d7d4000 - 000000007d7de000 kernel: Allocating PCI resources starting at 88000000 (gap: 80000000:74000000) kernel: SMP: Allowing 64 CPUs, 60 hotplug CPUs kernel: Built 1 zonelists. Total pages: 505346 kernel: Kernel command line: ro root=/dev/md2 kernel: Initializing CPU#0 kernel: PID hash table entries: 4096 (order: 12, 32768 bytes) kernel: Console: colour VGA+ 80x25 kernel: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) kernel: Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) kernel: Checking aperture... kernel: Memory: 2012576k/2056060k available (2627k kernel code, 42944k reserved, 1677k data, 224k init) kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 6186.24 BogoMIPS (lpj=3093121) kernel: Security Framework v1.0.0 initialized kernel: SELinux: Initializing. kernel: selinux_register_security: Registering secondary module capability kernel: Capability LSM initialized as secondary kernel: Mount-cache hash table entries: 256 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K kernel: CPU: L2 cache: 256K kernel: CPU: L3 cache: 8192K kernel: using mwait in idle threads. kernel: CPU: Physical Processor ID: 0 kernel: CPU: Processor Core ID: 0 kernel: MCE: Machine Check Exception Reporting is disabled. kernel: SMP alternatives: switching to UP code kernel: ACPI: Core revision 20060707 kernel: Using local APIC timer interrupts. kernel: Detected 6.236 MHz APIC timer. kernel: SMP alternatives: switching to SMP code kernel: Booting processor 1/4 APIC 0x2 kernel: Initializing CPU#1 kernel: Calibrating delay using timer specific routine.. 6185.87 BogoMIPS (lpj=3092938) kernel: CPU: L1 I cache: 32K, L1 D cache: 32K kernel: CPU: L2 cache: 256K kernel: CPU: L3 cache: 8192K kernel: CPU: Physical Processor ID: 0 kernel: CPU: Processor Core ID: 1 kernel: Intel(R) Xeon(R) CPU E3-1220 V2 @ 3.10GHz stepping 09 kernel: SMP alternatives: switching to SMP code kernel: Booting processor 2/4 APIC 0x4 kernel: Initializing CPU#2 kernel: Calibrating delay using timer specific routine.. 6185.88 BogoMIPS (lpj=3092941) kernel: CPU: L1 I cache: 32K, L1 D cache: 32K kernel: CPU: L2 cache: 256K kernel: CPU: L3 cache: 8192K kernel: CPU: Physical Processor ID: 0 kernel: CPU: Processor Core ID: 2 kernel: Intel(R) Xeon(R) CPU E3-1220 V2 @ 3.10GHz stepping 09 kernel: SMP alternatives: switching to SMP code kernel: Booting processor 3/4 APIC 0x6 kernel: Initializing CPU#3 kernel: Calibrating delay using timer specific routine.. 6185.86 BogoMIPS (lpj=3092932) kernel: CPU: L1 I cache: 32K, L1 D cache: 32K kernel: CPU: L2 cache: 256K kernel: CPU: L3 cache: 8192K kernel: CPU: Physical Processor ID: 0 kernel: CPU: Processor Core ID: 3 kernel: Intel(R) Xeon(R) CPU E3-1220 V2 @ 3.10GHz stepping 09 kernel: Brought up 4 CPUs kernel: NMI watchdog testing PASSED. kernel: time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer. kernel: time.c: Detected 3093.121 MHz processor. kernel: migration_cost=23 kernel: checking if image is initramfs... it is kernel: Freeing initrd memory: 2693k freed kernel: NET: Registered protocol family 16 kernel: ACPI: bus type pci registered kernel: Warning: pci_mmcfg_init marking 256MB space uncacheable. kernel: MCFG table requires 64MB uncacheable only. Try booting with acpi_mcfg_max_pci_bus_num=on kernel: PCI: Using MMCONFIG at f4000000 kernel: ACPI: Interpreter enabled kernel: ACPI: Using IOAPIC for interrupt routing kernel: ACPI: No dock devices found. kernel: ACPI: PCI Root Bridge [PCI0] (0000:00) kernel: pci 0000:00:1c.0: PCI bridge to [bus 0a-0a] kernel: pci 0000:00:1c.4: PCI bridge to [bus 02-02] kernel: pci 0000:00:1c.7: PCI bridge to [bus 01-01] kernel: pci 0000:00:1e.0: PCI bridge to [bus 13-13] (subtractive decode) kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11) kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11) kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11) *0, disabled. kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11) kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11) kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 11) *4 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 10 11) *0, disabled. kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 11) *0, disabled. kernel: Linux Plug and Play Support v0.97 (c) Adam Belay kernel: pnp: PnP ACPI init kernel: pnp: PnP ACPI: found 10 devices kernel: usbcore: registered new driver usbfs kernel: usbcore: registered new driver hub kernel: PCI: Using ACPI for IRQ routing kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report kernel: NetLabel: Initializing kernel: NetLabel: domain hash size = 128 kernel: NetLabel: protocols = UNLABELED CIPSOv4 kernel: NetLabel: unlabeled traffic allowed by default kernel: hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0, 0, 0, 0, 0, 0 kernel: hpet0: 8 64-bit timers, 14318180 Hz kernel: DMAR:Host address width 39 kernel: DMAR:DRHD base: 0x000000fed90000 flags: 0x1 kernel: IOMMU fed90000: ver 1:0 cap c9008020660262 ecap f010da kernel: DMAR:RMRR base: 0x0000007dffd000 end: 0x0000007dffffff kernel: DMAR:No ATSR found kernel: PCI-GART: No AMD northbridge found. kernel: system 00:01: ioport range 0x408-0x40f has been reserved kernel: system 00:01: ioport range 0x4d0-0x4d1 has been reserved kernel: system 00:01: ioport range 0x310-0x313 has been reserved kernel: system 00:01: iomem range 0xf4000000-0xf7ffffff has been reserved kernel: system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved kernel: system 00:01: iomem range 0xfed90000-0xfed91fff has been reserved kernel: pci 0000:00:1c.0: PCI bridge to [bus 0a-0a] kernel: pci 0000:00:1c.0: bridge window [io disabled] kernel: pci 0000:00:1c.0: bridge window [mem disabled] kernel: pci 0000:00:1c.0: bridge window [mem pref disabled] kernel: pci 0000:00:1c.4: PCI bridge to [bus 02-02] kernel: pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff] kernel: pci 0000:00:1c.4: bridge window [mem 0xfbf00000-0xfbffffff] kernel: pci 0000:00:1c.4: bridge window [mem pref disabled] kernel: pci 0000:01:00.2: BAR 6: assigned [mem 0xfad00000-0xfad0ffff pref] kernel: pci 0000:00:1c.7: PCI bridge to [bus 01-01] kernel: pci 0000:00:1c.7: bridge window [io 0x2000-0x3fff] kernel: pci 0000:00:1c.7: bridge window [mem 0xfad00000-0xfbefffff] kernel: pci 0000:00:1c.7: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] kernel: pci 0000:00:1e.0: PCI bridge to [bus 13-13] kernel: pci 0000:00:1e.0: bridge window [io disabled] kernel: pci 0000:00:1e.0: bridge window [mem disabled] rpc.statd[2187]: Version 1.0.9 Starting kernel: pci 0000:00:1e.0: bridge window [mem pref disabled] kernel: GSI 16 sharing vector 0xA9 and IRQ 16 kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 kernel: ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169 kernel: GSI 17 sharing vector 0xB1 and IRQ 17 kernel: ACPI: PCI Interrupt 0000:00:1c.7[D] -> GSI 19 (level, low) -> IRQ 177 kernel: NET: Registered protocol family 2 kernel: IP route cache hash table entries: 65536 (order: 7, 524288 bytes) kernel: TCP established hash table entries: 262144 (order: 10, 4194304 bytes) kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) kernel: TCP: Hash tables configured (established 262144 bind 65536) kernel: TCP reno registered kernel: audit: initializing netlink socket (disabled) kernel: type=2000 audit(1420618613.662:1): initialized kernel: Total HugeTLB memory allocated, 0 kernel: VFS: Disk quotas dquot_6.5.1 kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) kernel: Initializing Cryptographic API kernel: alg: No test for crc32c (crc32c-generic) kernel: ksign: Installing public key data kernel: Loading keyring kernel: - Added public key B69F0AC84A59E856 kernel: - User ID: CentOS (Kernel Module GPG key) kernel: io scheduler noop registered kernel: io scheduler anticipatory registered kernel: io scheduler deadline registered kernel: io scheduler cfq registered (default) kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5 kernel: ACPI: CPU0 (power states: C1[C1] C2[C2]) kernel: ACPI: CPU1 (power states: C1[C1] C2[C2]) kernel: ACPI: CPU2 (power states: C1[C1] C2[C2]) kernel: ACPI: CPU3 (power states: C1[C1] C2[C2]) kernel: ACPI: Thermal Zone [THM0] (8 C) kernel: Real Time Clock Driver v1.12ac kernel: Non-volatile memory driver v1.2 kernel: Linux agpgart interface v0.101 (c) Dave Jones kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A kernel: brd: module loaded kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx kernel: ide-floppy driver 0.99.newide kernel: usbcore: registered new driver hiddev kernel: usbcore: registered new driver usbhid kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver kernel: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12 kernel: mice: PS/2 mouse device common for all mice kernel: md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 kernel: md: bitmap version 4.39 kernel: TCP bic registered kernel: Initializing IPsec netlink socket kernel: NET: Registered protocol family 1 kernel: NET: Registered protocol family 17 kernel: ACPI: (supports S0 S4 S5) kernel: Initalizing network drop monitor service kernel: Freeing unused kernel memory: 224k freed kernel: Write protecting the kernel read-only data: 533k kernel: input: AT Translated Set 2 keyboard as /class/input/input0 kernel: GSI 18 sharing vector 0xD9 and IRQ 18 kernel: ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 21 (level, low) -> IRQ 217 kernel: ehci_hcd 0000:00:1a.0: EHCI Host Controller kernel: ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 kernel: ehci_hcd 0000:00:1a.0: debug port 2 kernel: ehci_hcd 0000:00:1a.0: irq 217, io mem 0xfacd0000 kernel: ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 kernel: usb usb1: configuration #1 chosen from 1 choice kernel: hub 1-0:1.0: USB hub found kernel: hub 1-0:1.0: 2 ports detected kernel: GSI 19 sharing vector 0xE1 and IRQ 19 kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 225 kernel: ehci_hcd 0000:00:1d.0: EHCI Host Controller kernel: ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 kernel: ehci_hcd 0000:00:1d.0: debug port 2 kernel: ehci_hcd 0000:00:1d.0: irq 225, io mem 0xfacc0000 kernel: ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 kernel: usb usb2: configuration #1 chosen from 1 choice kernel: hub 2-0:1.0: USB hub found kernel: hub 2-0:1.0: 2 ports detected kernel: USB Universal Host Controller Interface driver v3.0 kernel: ACPI: PCI Interrupt 0000:01:00.4[B] -> GSI 16 (level, low) -> IRQ 169 kernel: uhci_hcd 0000:01:00.4: UHCI Host Controller kernel: uhci_hcd 0000:01:00.4: new USB bus registered, assigned bus number 3 kernel: uhci_hcd 0000:01:00.4: port count misdetected? forcing to 2 ports kernel: uhci_hcd 0000:01:00.4: irq 169, io base 0x00002000 kernel: usb usb3: configuration #1 chosen from 1 choice kernel: hub 3-0:1.0: USB hub found kernel: hub 3-0:1.0: 2 ports detected kernel: usb 1-1: new high speed USB device using ehci_hcd and address 2 kernel: md: raid1 personality registered for level 1 kernel: SCSI subsystem initialized kernel: GSI 20 sharing vector 0xE9 and IRQ 20 kernel: ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 233 kernel: usb 1-1: configuration #1 chosen from 1 choice kernel: hub 1-1:1.0: USB hub found kernel: hub 1-1:1.0: 6 ports detected kernel: usb 2-1: new high speed USB device using ehci_hcd and address 2 kernel: usb 2-1: configuration #1 chosen from 1 choice kernel: hub 2-1:1.0: USB hub found kernel: hub 2-1:1.0: 6 ports detected kernel: usb usb3: Controller not stopped yet! kernel: ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode kernel: ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ems kernel: scsi0 : ahci kernel: scsi1 : ahci kernel: scsi2 : ahci kernel: scsi3 : ahci kernel: scsi4 : ahci kernel: scsi5 : ahci kernel: ata1: SATA max UDMA/133 abar m2048@0xfacb0000 port 0xfacb0100 irq 50 kernel: ata2: SATA max UDMA/133 abar m2048@0xfacb0000 port 0xfacb0180 irq 50 kernel: ata3: SATA max UDMA/133 abar m2048@0xfacb0000 port 0xfacb0200 irq 50 kernel: ata4: SATA max UDMA/133 abar m2048@0xfacb0000 port 0xfacb0280 irq 50 kernel: ata5: SATA max UDMA/133 abar m2048@0xfacb0000 port 0xfacb0300 irq 50 kernel: ata6: SATA max UDMA/133 abar m2048@0xfacb0000 port 0xfacb0380 irq 50 kernel: ata1: SATA link down (SStatus 0 SControl 300) kernel: ata2: SATA link down (SStatus 0 SControl 300) kernel: ata3: SATA link down (SStatus 0 SControl 300) kernel: ata4: SATA link down (SStatus 0 SControl 300) kernel: ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) kernel: ata5.00: ATA-8: MB1000GCEHH, HPGD, max UDMA/133 kernel: ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) kernel: ata5.00: configured for UDMA/133 kernel: ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) kernel: ata6.00: ATA-8: MB1000GCEHH, HPGD, max UDMA/133 kernel: ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) kernel: ata6.00: configured for UDMA/133 kernel: Vendor: ATA Model: MB1000GCEHH Rev: HPGD kernel: Type: Direct-Access ANSI SCSI revision: 05 kernel: SCSI device sda: 1953525168 512-byte hdwr sectors (1000205 MB) kernel: sda: Write Protect is off kernel: SCSI device sda: drive cache: write back kernel: SCSI device sda: 1953525168 512-byte hdwr sectors (1000205 MB) kernel: sda: Write Protect is off kernel: SCSI device sda: drive cache: write back kernel: sda: sda1 sda2 sda3 kernel: sd 4:0:0:0: Attached scsi disk sda kernel: Vendor: ATA Model: MB1000GCEHH Rev: HPGD kernel: Type: Direct-Access ANSI SCSI revision: 05 kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB) kernel: sdb: Write Protect is off kernel: SCSI device sdb: drive cache: write back kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB) kernel: sdb: Write Protect is off kernel: SCSI device sdb: drive cache: write back kernel: sdb: sdb1 sdb2 sdb3 kernel: sd 5:0:0:0: Attached scsi disk sdb kernel: md: raid0 personality registered for level 0 kernel: Initializing USB Mass Storage driver... kernel: usbcore: registered new driver usb-storage kernel: USB Mass Storage support registered. kernel: device-mapper: uevent: version 1.0.3 kernel: device-mapper: ioctl: 4.11.6-ioctl (2011-02-18) initialised: dm-devel@redhat.com javascript:; kernel: device-mapper: dm-raid45: initialized v0.2594l kernel: md: Autodetecting RAID arrays. kernel: md: autorun ... kernel: md: considering sdb3 ... kernel: md: adding sdb3 ... kernel: md: sdb2 has different UUID to sdb3 kernel: md: sdb1 has different UUID to sdb3 kernel: md: adding sda3 ... kernel: md: sda2 has different UUID to sdb3 kernel: md: sda1 has different UUID to sdb3 kernel: md: created md2 kernel: md: bind<sda3> kernel: md: bind<sdb3> kernel: md: running: <sdb3><sda3> kernel: raid1: raid set md2 active with 2 out of 2 mirrors kernel: md: considering sdb2 ... kernel: md: adding sdb2 ... kernel: md: sdb1 has different UUID to sdb2 kernel: md: adding sda2 ... kernel: md: sda1 has different UUID to sdb2 kernel: md: created md0 kernel: md: bind<sda2> kernel: md: bind<sdb2> kernel: md: running: <sdb2><sda2> kernel: md0: setting max_sectors to 512, segment boundary to 131071 kernel: raid0: looking at sdb2 kernel: raid0: comparing sdb2(2096384) with sdb2(2096384) kernel: raid0: END kernel: raid0: ==> UNIQUE kernel: raid0: 1 zones kernel: raid0: looking at sda2 kernel: raid0: comparing sda2(2096384) with sdb2(2096384) kernel: raid0: EQUAL kernel: raid0: FINAL 1 zones kernel: raid0: done. kernel: raid0 : md_size is 4192768 blocks. kernel: raid0 : conf->hash_spacing is 4192768 blocks. kernel: raid0 : nb_zone is 1. kernel: raid0 : Allocating 8 bytes for hash. kernel: md: considering sdb1 ... kernel: md: adding sdb1 ... kernel: md: adding sda1 ... kernel: md: created md1 kernel: md: bind<sda1> kernel: md: bind<sdb1> kernel: md: running: <sdb1><sda1> kernel: raid1: raid set md1 active with 2 out of 2 mirrors kernel: md: ... autorun DONE. kernel: md: Autodetecting RAID arrays. kernel: md: autorun ... kernel: md: ... autorun DONE. kernel: kjournald starting. Commit interval 5 seconds kernel: EXT3-fs: mounted filesystem with ordered data mode. kernel: SELinux: Disabled at runtime. kernel: type=1404 audit(1420618647.375:2): selinux=0 auid=4294967295 ses=4294967295 kernel: input: PC Speaker as /class/input/input1 kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 kernel: ACPI: PCI Interrupt 0000:01:00.2[B] -> GSI 16 (level, low) -> IRQ 169 kernel: e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k kernel: e1000e: Copyright(c) 1999 - 2012 Intel Corporation. kernel: e1000e 0000:02:00.0: Disabling ASPM L0s L1 kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169 kernel: e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode kernel: Floppy drive(s): fd0 is 1.44M kernel: sd 4:0:0:0: Attached scsi generic sg0 type 0 kernel: sd 5:0:0:0: Attached scsi generic sg1 type 0 kernel: e1000e 0000:02:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 38:ea:a7:aa:8a:32 kernel: e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection kernel: e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF kernel: floppy0: no floppy controllers found kernel: work still pending kernel: Floppy drive(s): fd0 is 1.44M kernel: floppy0: no floppy controllers found kernel: work still pending kernel: lp: driver loaded but no devices found kernel: ACPI: Power Button (FF) [PWRF] kernel: ACPI: Mapper loaded kernel: dell-wmi: No known WMI GUID found kernel: md: Autodetecting RAID arrays. kernel: md: autorun ... kernel: md: ... autorun DONE. kernel: device-mapper: multipath: version 1.0.6 loaded kernel: EXT3 FS on md2, internal journal kernel: kjournald starting. Commit interval 5 seconds kernel: EXT3 FS on md1, internal journal kernel: EXT3-fs: mounted filesystem with ordered data mode. kernel: Adding 4192760k swap on /dev/md0. Priority:-1 extents:1 across:4192760k kernel: Loading iSCSI transport class v2.0-871. kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com javascript:;> kernel: All bugs added by David S. Miller <davem@redhat.com javascript:;

...

kernel: libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits. kernel: libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0. kernel: Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010) kernel: iscsi: registered transport (cxgb3i) kernel: IPv6: Loaded, but administratively disabled, reboot required to enable kernel: cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.12 (June 29, 2012) kernel: Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.2.2 (Jun 18, 2012) kernel: iscsi: registered transport (bnx2i) kernel: iscsi: registered transport (tcp) kernel: iscsi: registered transport (iser) kernel: iscsi: registered transport (be2iscsi) kernel: 8021q: adding VLAN 0 to HW filter on device eth0 kernel: e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx ntpd[2452]: ntpd 4.2.2p1@1.1570-o Fri Nov 18 13:21:21 UTC 2011 (1) ntpd[2453]: precision = 1.000 usec ntpd[2453]: Listening on interface wildcard, 0.0.0.0#123 Disabled ntpd[2453]: Listening on interface lo, 127.0.0.1#123 Enabled ntpd[2453]: Listening on interface eth0, 178.18.69.1#123 Enabled ntpd[2453]: kernel time sync status 0040 ntpd[2453]: getaddrinfo: "::1" invalid host address, ignored xinetd[2437]: xinetd Version 2.3.14 started with libwrap loadavg labeled-networking options compiled in. xinetd[2437]: Started working: 1 available service FaxQueuer[2970]: HylaFAX (tm) Version 4.3.10 FaxQueuer[2970]: Copyright (c) 1990-1996 Sam Leffler FaxQueuer[2970]: Copyright (c) 1991-1996 Silicon Graphics, Inc. HylaFAX[2973]: HylaFAX INET Protocol Server: restarted. saslauthd[3001]: detach_tty : master pid is: 3001 saslauthd[3001]: ipc_init : listening on socket: /var/run/saslauthd/mux ntpd[2453]: frequency initialized 8.527 PPM from /var/lib/ntp/drift ntpd[2453]: synchronized to 200.27.106.115, stratum 1 ntpd[2453]: kernel time sync enabled 0001 _______________________________________________ CentOS-es mailing list CentOS-es@centos.org javascript:; http://lists.centos.org/mailman/listinfo/centos-es